Installation instructions. The professional Liberty collection. and User guide US CA. BFGC-30 models.

Transcription

1 The professioal Liberty collectio BFGC-30 models Istallatio istructios ad User guide US CA

2

3 A MESSAGE TO OUR CUSTOMERS Thak you for selectig this DCS Professioal Liberty Collectio Outdoor Appliace. Because of this appliace s uique features we have developed this Use & Care ad Istallatio Guide. It cotais valuable iformatio o how to properly istall, operate ad maitai your ew appliace for years of safe ad ejoyable use. To help serve you better, please fill out ad submit your Product Registratio by visitig our website at www. dcsappliaces.com ad selectig Customer Care o the home page ad the select Product Registratio. I additio, keep this guide hady, as it will help aswer questios that may arise as you use your ew appliace. For your coveiece, product questios ca be aswered by a DCS Customer Care Represetative at , or customer.care@fisherpaykel.com. NOTE: Please write the Model, Code ad Serial Numbers o this page for refereces (ca be foud o the iside, right side pael behid the drip pa hadle. See page 7.) MODEL NUMBER CODE SERIAL NUMBER NOTE: Ispect the product to verify that there is o shippig damage. If ay damage is detected, call the shipper ad iitiate a damage claim. DCS by Fisher & Paykel is ot resposible for shippig damage. DO NOT discard ay packig material (box, pallet, straps) util the uit has bee ispected. WARNING! Do ot try lightig this appliace without readig the Lightig Istructios sectio of this maual. Improper istallatio, adjustmet, alteratio, service or maiteace ca cause property damage, ijury or death. Read the istallatio, operatig ad maiteace istructios thoroughly before use, istallig or servicig this equipmet. This outdoor cookig gas appliace is ot iteded to be istalled i or o recreatioal vehicles, boats or i a o-vetilated room. For outdoor residece use oly. WARNING 1. Do Not store or use gasolie or ay other flammable vapors ad liquids i the viciity of this or ay other appliace. 2. A LP cylider ot coected for use shall ot be stored i the viciity of this or ay other appliace. DANGER If you smell gas: 1. Shut off gas to the appliace. 2. Extiguish ay ope flames. 3. Remove ay covers i place over burers/griddle. 4. If odor cotiues, keep away from the appliace ad immediately call your gas supplier or your fire departmet. PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE. 1

4 CONTENTS SAFETY PRACTICES & PRECAUTIONS 3-5 OUTDOOR APPLIANCE MODELS 6 BEFORE USING YOUR APPLIANCE 7 INSTALLATION Locatig Outdoor Appliace/Built-i Clearaces 8-9 Built-i Costructio Details 10 Cart Assembly Istructios Gas Hook-up Leak Testig Burer Adjustmet 22 Radiat Assembly 23 Sik 24 Side Shelf (optioal) Istaller Checklist 26 USING THE GRILL Lightig Istructios 27 Use of the Grill USING THE SIDE BURNER Lightig Istructios 29 USING THE GRIDDLE Thermocouple 30 Before Usig the Griddle for the First Time or to Re-seaso 30 Use of the Griddle 30 Lightig Istructios 31 USING THE SINK 32 CARE & MAINTENANCE TROUBLESHOOTING Outdoor appliace 37 Side Burer 38 SERVICE 39 WARRANTY

5 SAFETY PRACTICES & PRECAUTIONS IMPORTANT SAFETY NOTICE! Certai Liquid Propae dealers may fill liquid propae cyliders for use i the outdoor appliace beyod cylider fillig capacity. This Overfillig may create a dagerous coditio. IMPORTANT SAFETY NOTICE! Be sure to remove covers from grill, griddle or side burers before attemptig to light or use. Overfilled taks ca build up excess pressure. As a safety device, the taks pressure relief valve will vet propae gas vapor to relieve this excess pressure. This vapor is combustible ad therefore ca be igited. To reduce this dager, you should take the followig safety precautios: 1. Whe you have your tak filled, be sure you tell the supplier to fill it to o more tha 3/4 (75%) of its total capacity. 2. If you ow or use a spare tak, or have a discoected tak, you should NEVER store it ear or uder the outdoor appliace/cart uit or heat box, or ear ay other igitio or heat source. A metallic sticker with this warig is provided with the grill to remid you, your family ad all others who may use your grill of these safety precautios. Istall this sticker close to your barbeque grill. 3. Do ot store a full tak i direct sulight. WARNING! Do ot try lightig this appliace without readig the LIGHTING INSTRUCTIONS sectio of this maual. This outdoor appliace is for outdoor use oly. STICKER WARNING! Push ad hold the igiter butto, tur the selected burer kob to HI or SEAR. If burer does ot light i 4 to 5 secods tur kob OFF ad wait 5 miutes for ay accumulated gas to dissipate before tryig agai. Begi by isurig proper istallatio ad servicig. Follow the istallatio istructios withi this maual. Have your outdoor appliace istalled by a qualified techicia. Have the istaller show you where the gas supply shut-off valve is located so that you kow where to shut off the gas to the outdoor appliace. If you smell gas, your istaller has ot doe a proper job of checkig for leaks. If the coectios are ot perfectly sealed, you ca have a small leak ad therefore a fait gas smell. Fidig a leak is ot a do-it-yourself procedure. Some leaks ca oly be foud with the burer cotrol i the ON positio ad this must be doe by a qualified techicia. Always follow lightig istructios. Lid must be off before lightig the grill or side burers. Check for gas leaks before lightig. Never lea over a ope grill whe lightig. Serious burs may result. WARNING Hot surfaces surroudig grill grates could cause serious burs. Always leave at least 12" clearace to combustibles aroud the grill. Never store a spare LP cylider uder or ear this uit. Never fill the tak beyod 3/4 full. A fire causig death or serious ijury may occur. Childre should ot be left aloe or uatteded i a area where the outdoor appliace is beig used. Never allow them to sit, stad or play o or aroud the outdoor appliace at ay time. Whe i use, portios of the outdoor appliace ca get hot eough to cause severe burs. Do ot store items of iterest to childre aroud or below the outdoor appliace, i the cart or masory eclosure. Never allow childre to crawl iside a cart or eclosure. 3

6 SAFETY PRACTICES & PRECAUTIONS Never let clothig, pot holders or other flammable materials come i cotact with or too close to ay grate, burer or hot surface util it has cooled. Fabric may igite ad result i persoal ijury. Never attach or discoect a LP cylider, or move or alter gas fittigs whe the grill is i operatio or is hot. Clea ad perform geeral maiteace o the grill twice a year. Watch for corrosio, cracks, or isect activity. Check the regulator, hoses, burer ports, air shutter, ad veturi/valve sectio carefully. Always tur off gas at the source (tak or supply lie) prior to ispectig parts. After a period of storage or o-use (such as over the witer), the gas grill should be checked for gas leaks, deterioratio, proper assembly, ad burer obstructios before usig. Do ot heat uopeed food cotaiers as a build-up of pressure may cause the cotaier to burst. Always use a covered had whe takig off the lid ad oly do so slowly to allow heat ad steam to escape. Never lea over a ope outdoor appliace. Whe lightig a burer, always pay close attetio to what you are doig. After lightig burers, make sure burers are operatig ormally (see pages 21 ad 22). Whe usig the outdoor appliace, do ot touch the outdoor appliace burer grate or immediate surroudig area as these areas become extremely hot ad could cause burs. Grease is flammable. Let hot grease cool before attemptig to hadle it. Avoid lettig grease deposits collect i the drip pa. Clea ofte. For persoal safety, wear proper apparel. Loose fittig garmets or sleeves should ever be wor while usig this appliace. Some sythetic fabrics are highly flammable ad should ot be wor while cookig. Oly certai types of glass, heat-proof glass ceramic, eartheware, or other glazed utesils are suitable for outdoor appliace use. Use of some types of materials may break with sudde temperature chages. Use oly o low or medium heat settigs accordig to the maufacturer s directios. WARNING! Spiders ad isects ca est i the burers of this ad ay other outdoor appliace, ad cause the gas to flow from the frot of the burer. The gas will flow from the frot of the burer ito the cotrol pael. This is a very dagerous coditio which ca cause a fire to occur behid the valve pael, thereby damagig the outdoor appliace compoets ad makig it usafe to operate. WARNING! Keep the area surroudig the outdoor appliace free from combustible materials, trash, or combustible fluids ad vapors such as gasolie or charcoal lighter fluid. Do ot obstruct the flow of combustio ad vetilatio air. WARNING! Never use the outdoor appliace i widy coditios. If located i a cosistetly widy area (oceafrot, moutaitop, etc.) a wid break will be required. Always adhere to the specified clearaces listed. OUTDOOR APPLIANCE PLACEMENT PREFERRED AIR FLOW FLAME BURNER WIND FLAME LIFT PRIMARY INTAKE AIR FLOW WIND 4

7 SAFETY PRACTICES & PRECAUTIONS Do ot use alumium foil to lie drip pas, grates or radiats. This ca severely upset combustio air flow or trap excessive heat i the cotrol area. The result of this ca be melted kobs or damaged igitio compoets. Whe usig the side burers always use flat bottomed pas which are large eough to cover the side burer. Adjust the flame so that it heats oly the bottom of the pa to avoid igitio of clothig. Positio hadles iward away from ope edges of the uit to avoid burs associated with uitetioal spillovers. Hold the hadle of the pa to prevet movemet of it whe turig or stirrig food. For proper lightig ad performace of the burers, keep the ports clea. It is ecessary to clea them periodically for optimum performace. Clea the outdoor appliace with cautio. Avoid steam burs; do ot use a wet spoge or cloth to clea the outdoor appliace while it is hot. Some cleaers produce oxious fumes or ca igite if applied to a hot surface. Be sure all outdoor appliace cotrols are tured off ad the outdoor appliace is cool before usig ay type of aerosol cleaer o or aroud the outdoor appliace. The chemical that produces the sprayig actio could, i the presece of heat, igite or cause metal parts to corrode. Do ot use the grill for cookig excessively fatty meats or products which promote flare-ups. Never use outdoor appliace without the drip pa ad grease tray i place ad pushed all the way to the back. Without the grease pa, hot grease could leak dowward ad produce a fire or explosio hazard. Do ot operate the outdoor appliace uder u protected combustible costructio. Use oly i well vetilated areas. Do ot use i buildigs, garages, sheds, breezeway, covered structure or other such over head structures ad eclosed areas. This uit is for outdoor use oly. If a cart uit is stored idoors, esure that it is cool, fold the optioal side shelf(s) dow, ad ever push or pull o the side shelves. If LP, the LP cylider must be uhooked ad stored outside i a well vetilated area, out of reach of childre. Do ot use charcoal or lighter fluid i the outdoor appliace. Never use the outdoor appliace i a widy area. Never use a deted or rusty LP tak. Keep the vetilatio opeigs of the cylider eclosure free ad clear from debris. Use oly dry potholders; moist or damp potholders o hot surfaces may cause burs from steam. Do ot use a towel or bulky cloth i place of potholders. Do ot let potholders touch hot portios of the outdoor appliace. Have a ABC rated Fire Extiguisher accessible ever attempt to extiguish a grease fire with water or ot her liquids. To avoid burs whe cookig, use log hadled BBQ tools. Do ot move the appliace durig its use. This uit is for outdoor use oly! Do ot operate i eclosed areas. This could result i carbo mooxide build-up which would result i ijury or death. Whe usig the grill, be sure that all parts of the uit are firmly i place ad that the grill is stable (ca t be tipped over). To put out flare-ups, adjust the cotrols to lower the temperature CALIFORNIA PROPOSITION 65-WARNING: The burig of gas cookig fuel geerates some by-products which are o the list of substaces which are kow by the State of Califoria to cause cacer or reproductive harm. Califoria law requires busiesses to war customers of potetial exposure to such substaces. To miimize exposure to these substaces, always operate this uit accordig to the Use ad Care Guide, esurig you provide good vetilatio whe cookig with gas. This outdoor cookig gas appliace is ot iteded to be istalled i or o recreatioal vehicles, trailers ad/or boats. Note: This product must be istalled by a licesed plumber or gas fitter whe istalled withi the Commowealth of Massachusetts. 5

8 OUTDOOR APPLIANCE MODELS BFGC-30G - All-Grill BFGC-30BGD - Double Side Burer/Griddle BFGC-30BS - Double Side Burer/Sik 6

9 BEFORE USING YOUR APPLIANCE 1. Remove all packagig materials ad labels from your appliace. If the istaller has ot set up your appliace, check that you have the followig items: BFGC-30G - All-Grill - All-Grill cover - Grill grates (5 pcs) - Radiat trays to hold ceramic rods (2 pcs) - Ceramic rods (28 pcs) - Cover hager (2 pcs) BFGC-30BGD - Side Burer/Griddle - Covers (2 pcs) - Griddle grease cup - Side burer grate - Griddle flu cover - Cover hager (2 pcs) BFGC-30BS - Side Burer/Sik - Covers (2 pcs) - Faucet - Drai plug - Side burer grate - Cover hager (2 pcs) - Burer caps (2 pcs) NOTE: If ay of the listed items are missig, cotact DCS at (888) Please be prepared with your Model #, Serial # ad descriptio of product you have purchased. Tag locatio of Model # ad Serial # Read all istallatio istructios i this maual to see if the uit has bee properly istalled. If ot doe or doe correctly, correct before usig the uit. 7

10 INSTALLATION LOCATING OUTDOOR APPLIANCE/BUILT-IN CLEARANCES LOCATION: Whe determiig a suitable locatio, take ito accout cocers such as exposure to wid (If located i a widy area, a wid break must be provided to prevet poor burer performace or product damage.), proximity to traffic paths ad keepig ay gas or electrical supply lies as short as possible. Locate the outdoor appliace oly i a well vetilated area. Do ot istall the outdoor appliace uder overhead uprotected combustible costructio. Never locate the outdoor appliace i a buildig, garage, breezeway, shed, gazebo, laai or other such eclosed areas without a approved vetilatio system. Durig heavy use, the outdoor appliace will produce a lot of smoke ad flames. Esure there is adequate area for it to dissipate. Importat! Gas fittigs, regulator, ad istaller supplied shut-off valves must be used ad easily accessible. Clearaces to Combustible* Costructio (see defiitio o page 9): A miimum of 12 from the sides ad a miimum of 12 from the back must be maitaied from the outdoor appliace above the cookig surface to adjacet vertical combustible* costructio. (Fig. 01) Do ot istall uder uprotected combustible* costructio. Maitai 12" from combustible costructio Maitai 12" from combustible costructio Maitai 12" from combustible costructio 10-1/2" Bottom of support flage 10-1/16" 2" 22-3/4" 25-1/2" Fig. 01 Importat! All outdoor appliaces must have a isulated jacket to combustible islad costructio. Clearaces to Nocombustible** Costructio (see defiitio o page 9): A miimum of 3 clearace from the back of the outdoor appliace to ocombustible** costructio is required. It is desirable to allow at least 6 side clearace to ocombustible** costructio above the cookig surface or couter space. The outdoor appliace ca be placed directly adjacet to ocombustible** costructio below the cookig surface. WARNING! Failure to maitai required clearaces creates a fire hazard that may result i property damage or serious persoal ijury. WARNING! If a Nocombustible** material such as metal is coverig a combustible material such as wood, the miimum clearace distace eeds to be held to the wood. The presece of a Nocombustible** material iside the clearace zoe does ot elimiate the miimum clearace zoe to combustible material. 8

11 INSTALLATION LOCATING BUILT-IN CLEARANCES WARNING! The appliaces are desiged to fuctio i a ope area. Recommeded miimum clearaces should be maitaied to all surfaces (combustible* ad ocombustible**) for optimum performace. Nocombustible** material withi the miimum clearace area could result i discoloratio or deterioratio. *DEFINITION OF COMBUSTIBLE MATERIAL - Ay materials of a buildig structure or decorative structure made of wood, compressed paper, plat fibers, stucco or other materials that are capable of trasferrig heat or beig igited ad bured. Such material shall be cosidered combustible eve though flame-proofed, fire-retardat treated, or paited surface or plastered. **DEFINITION OF Nocombustible MATERIAL - Material which is ot capable of beig igited ad bured, such as materials cosistig etirely of, or a combiatio of, steel, iro, brick, tile, cocrete, slate, ad plaster (which is upaited). Importat! It is recommeded that a miimum of 10 sq. iches of vetilatio opeig be provided for both the left ad right sides, as well as the back of eclosure (Fig. 02), i order to safely dissipate ubured gas vapors i the evet of a gas supply leak. WARNING! Note specific built-i eclosure vetilatio requiremets. See text ad Fig. 02. GENERAL The outdoor appliace is desiged for easy placemet ito masory eclosures. For o-combustible applicatios the outdoor appliace drops ito the opeig show i Fig. 03 ad hags from its side flages. The deck must be level ad flat. A deck is ot required to support the uit from the bottom. Whe usig the isulated jacket i a combustible eclosure applicatio, see the bottom of Fig. 03. The jacket assembly must be supported from the bottom by a ledge o each side or a solid deck beeath the etire isulated jacket. INSULATED JACKET: If the outdoor appliace is to be placed ito a combustible eclosure, a approved isulated jacket is required ad is available from your dealer. Isulated jacket is ot required for BFGC-30BS Side Burer Sik Model. Use oly the DCS isulated jacket (p/ #70859) which has specifically bee desiged ad tested for this purpose. Review the detail drawig show (Fig. 03) ad take ito accout the provisios show for gas lie hook-up clearace i the right rear corer. It is recommeded that vetilatio holes are provided i the eclosure to elimiate the potetial build-up of gas i the evet of a gas leak. The supportig ledges or deck must be level ad flat. The couter should also be level. Vetilatio Requiremets: CUTOUT DIMENSIONS OF MATCHING ACCESS DOORS/DRAWERS: 10 i. 2 Mi. vetilatio o the back side ACCESS DOOR/ DRAWER MODELS ADN120X24 A 22" B 20" ADN120X30 28" 20" ADN120X36 34" 20" ADN120X48 46" 20" 10 i. 2 Mi. vetilatio left had side 1" Mi. B A Opeig for access doors/drawers 10 i. 2 Mi. vetilatio o the right had side Note: ot draw to scale ADR224 ADR236 ADR230 ADR248 22" 34" 28" 46" 20" 20" 20" 20" Fig. 02 9

12 INSTALLATION BUILT IN CONSTRUCTION DETAILS grill exhaust 12" (to combustible costructio) Bottom of support flage 10-1/16" 2" 22-3/4" 25-1/2" 3/4" Stadard layout for o-combustible eclosure: 35-1/2" Max. 10-1/8" 28-1/2" 20" 18-1/2" 28" 3" 22-3/4" 4" x 4" opeig for gas supply lie opeig for access doors (see page 9 for orderig iformatio) WARNING! If istallig the grill ito a o-combustible eclosure, all combustible costructio must still be outside the 12 ich clearace zoe. If your islad is made of stucco over the top of woode studs, the wood ca ot be iside the 12 ich clearace zoe to combustible, eve though the stucco is what is touchig the grill area. NOTE: See page 9 for vetilatio otes. Layout for isulated jacket oly - combustible eclosure: NOTE: See page 9 for isulated jacket part orderig iformatio. 34-7/8" 12" mi. 23-3/4" 18-1/2" 3-1/2" 4" x 4" opeig for gas supply lie 11-1/8" 20" 28" 35-1/2" Max. opeig for access doors/drawers (see page 9 for orderig iformatio) Fig

13 INSTALLATION CART ASSEMBLY INSTRUCTIONS IMPORTANT: Read all istructios before you begi. Do ot jump ahead or skip ay step. CAUTION: Some parts have sharp edges; care must be take whe hadlig the various compoets to avoid ijury. Please read safety iformatio provided i these istructios before begiig assembly. Wear gloves whe hadlig. Two or more people should work together to assemble the cart ad All-Grill, Double Side Burer/ Sik, or Double Side Burer/Griddle. NOTE: Avoid usig optioal side shelf to move cart. Push or pull cart by graspig corers of head. LOCATING THE CART For proper use, this product should be istalled/positioed o a flat groud or patio. Ueveess such as bumps, cracks ad protrusios should be 1/4 or less. Refer to Fig. 04 for required flat area dimesios. Gettig Started Remove packagig. TOP VIEW (with drawers ope) CAD 30 = 30 CAD 36 = 36 CAD 48 = 48 Cotets Icluded: Your cart is packaged i oe box. The box cotais your 30 cart ad a uiversal hardware kit to be used for head istallatio ad may cotai extra hardware for your coveiece. 4 feet Cotets Qty. 1 Tools Required: Fig. 04 Eye Goggles Cart Machied Phillips screws 10-24X1/2 Bracket, Tab 13 2 Work Gloves Power Screwdriver or Variable Speed Drill with Phillips - tip #2 Attachmet Bolt Hex 1/4-20-1/2 2 5/32 Alle Wrech Washer.313 x /16 Alle Wrech Nut Hex 1/ /32 Alle Wrech 11

14 INSTALLATION CART ASSEMBLY INSTRUCTIONS Step 1 Lik Carts Together (optioal) (To lik two or more CAD carts, the followig istructios must be doe first, usig the hardware provided, before istallig the top modules.) 1. To lik your carts together - had tighte 2 bolts, 4 washers, ad 2 uts o the frot ad back sides of the carts as show i Fig. 04. Carefully wrech tighte fasteers oce carts are aliged with each other. CAUTION: Oce the carts are liked, they caot be moved. Movig the carts oce liked could damage the carts. Fig. 05 Head of bolt with washer Head of bolt with washer Ed of bolt with ut ad washer Ed of bolt with ut ad washer 12

15 INSTALLATION CART ASSEMBLY INSTRUCTIONS Step 2 Outdoor Appliace Head Preparatio 1. First you will eed to remove the agle brackets from the side of the uit ad replace them with cart mout brackets (Fig. 06). Uit is shipped prepared for islad istallatio. SCREWS 2. Istall the bracket tab o both sides of the appliace head usig 8 of the x 1/2 screws. Istall each bracket with 4 screws o each side of the outdoor appliace head (Fig. 07 ad 08). Fig. 06 SCREWS Fig. 07 Fig. 08 Step 3 Head Placemet oto Cart (2 Persos Required) 1. Remove drip tray/pa (Fig. 09) ad other removable compoets (to lighte the load) such as grates, top burer caps ad compoets, ad griddle flue cover, radiat tray ad grill burer for easier hadlig. 2. Two persos required to lift head (sik module show). Placig head o cart, place rear of head over the rear of the cart first (Fig. 10). The allow the rear side tabs to first locate i the slots o the top of the cart sides. The other tabs will locate i the middle ad frot slots as the head is lowered ito positio o the cart (Fig. 11). Fig Positio tabs o side bracket to fit ito slots o the cart (be aware of pich poits)(fig ). Whe complete, the leadig ledge should sit flush o the top of the cart (o gap). 4. Secure the head to rear of cart (Fig. 14) with (2) Phillips-head screws provided (10-24 x 1/2 )(p/ ). TABS Fig. 10 Fig

16 INSTALLATION CART ASSEMBLY INSTRUCTIONS 3. Positio tabs o side bracket to fit ito slots o the cart (be aware of pich poits)(fig ). Whe complete, the leadig ledge should sit flush o the top of the cart (o gap)(fig. 14). PINCH POINT Fig. 12 Fig. 13 Fig Secure the head to rear of cart (Fig. 15) with (2) Phillips-head screws provided (10-24 x 1/2 ). 5. Istall remaiig (3) screws (10-24 x 1/2 ) ito the frot of head to the cart (Fig. 16). 6. Slide drip tray/pa back ito place ad reistall parts removed i Step 3, #1. Fig. 15 Fig

17 INSTALLATION CART ASSEMBLY INSTRUCTIONS Step 4 Gas Hookup - LP Make sure the cart assembly is stable. Ope the tak drawer. Place the LP tak ito locatio as show i Fig. 17. Coect the regulator assembly to the tak coectio with all appliaces valves i the OFF positio. Ope the tak valve ad test for gas leaks (Fig. 18). Fig. 17 Fig. 18 FOR YOUR SAFETY To prevet persoal ijury or damage to the drawers, do ot overload them. The maximum ratig of each drawer is 35 pouds. WARNING! Do ot push dow o the top of the drawers. The uit could tip forward. COVER HANGER To use the cover hagers provided, first place the cover hager ito the slot o the side or rear of your Cart (Fig. 19). The hag the cover i either directio. (Fig. 20 or 21). Cover hager Note: Do ot move the cart while the covers are hug. This could cause the covers to fall off the hagers ad damage the covers. Fig. 19 Fig. 20 Fig

18 INSTALLATION GAS HOOK-UP GAS REQUIREMENT Verify the type of gas supply to be used, either atural or LP, ad make sure the markig o the appliace ratig plate agrees with that of the supply. The ratig plate is located o the bottom of the outdoor appliace. Never coect a uregulated gas lie to the appliace. You must use the gas regulator provided with the uit eve if the supply is cotrolled. A istaller-supplied gas shut-off valve must be istalled i a easily accessible locatio. All istaller supplied parts must coform to local codes, or i the absece of local codes, with the Natioal Electrical Code, ANSI/NFPA 70 or the Caadia Electrical Code, CSA C22.1, ad the Natioal Fuel Gas Code, ANSI Z223.1 or CSA B149.1 Natural Gas Istallatio Code or CSA B149.2 Propae Istallatio Code. All pipe sealats must be a ap proved type ad resistat to the actios of LP gases. Never use pipe sealat o flare fittigs. All gas coectios should be made by a qualified techicia ad i accordace with local codes ad ordiaces. I the absece of local codes, the istallatio must comply with the Natioal Fuel Gas Code, ANSI Z Gas coversio kits are available from the factory. Whe orderig gas coversio kits, have the model umber, ad the type of gas (atural or LP) from your outdoor appliace. TOTAL GAS CONSUMPTION OF THE OUTDOOR APPLIANCE WITH ALL BURNERS ON HI/ SEAR: BFGC-30G - 50,000 Btu/hr BFGC-30BGD - 49,000 Btu/hr BFGC-30BS - 34,000 Btu/hr The appliace ad its idividual shut-off valve must be discoected from the gas supply pipig system durig ay pressure testig of that system at test pressures i excess of 1/2 PSIG (3.5 kpa.) The appliace must be isolated from the gas supply pipig system by closig its idividual maual shut-off valve durig ay pressure testig of the gas supply pipig system at test pressures equal to or less tha 1/2 PSIG (3.5 kpa.). The istallatio of this appliace must coform with local codes or, i the absece of local codes, with the Natioal Fuel Gas Code, ANSI Z Istallatio i Ca ada must be i accordace with the Stadard Ca1-b149.1 ad/or.2 (istallatio code for gas burig appliaces ad equipmet) ad local codes. NATURAL GAS HOOK UP: (THIS TYPE OF CONNECTION SHOULD BE PERFORMED BY A CERTIFIED OR LICENSED TECHNICIAN ONLY.) Coectio: 1/2 NPT male with 3/8 flare adapter. Operatig pressure: 4.0 W.C. Supply pressure: 5 to 14 water colum. If i excess of 14 W.C., a stepdow regulator is required. Check with your local gas utility compay or local codes for istructios o istallig gas supply lies. Be sure to check o type ad size of ru, ad how deep to bury the lie. If the gas lie is too small, the outdoor appliace will ot fuctio properly. Ay joit sealat used must be a approved type ad be resistive to the actios of atural gases. TO HOOK-UP THE FITTINGS SUPPLIED WITH THE OUTDOOR APPLIANCE: *Istallatio must coform with local Assemble as show (Fig. 22). Use threadig compoud o male threads oly. Do ot use threadig Istallatio Code codes or with the Natioal Fuel Gas Code ANSI Z223.1 or the CSA B149.2 Propae compoud o the male ed of the 1/2 NPT to 3/8 flare adapter. Use a secod pipe wrech to hold the outdoor appliace ilet pipe to avoid shiftig ay Fig. 22 Natural Gas iteral gas lies of the outdoor appliace. Esure that the regulator arrow poits i the directio of gas flow towards the uit, away from the supply. Do ot forget to place the istaller-supplied gas valve i a accessible locatio. 16 Bottom of uit Threadig compoud must be resistat to LP gas 1/2 NPT x 5.0 Nipple Istaller supplied shut-off valve must be easily accessible* Couplig 1/2 NPT x 2.0 Nipple Regulator 4.0" W.C. Adapter 1/2 NPT to 3/8 flare fittig Do ot put threadig compoud o these threads

19 INSTALLATION GAS HOOK-UP LP GAS HOOK UP (TYPE 1 OR QCC1 REGULATOR): All outdoor appliaces orificed for use with LP gas come equipped with a high capacity hose/regulator assem bly for coectio to a stadard 20 lb. LP cylider (Type 1). The LP tak is ot icluded. Coectio: 1/2 NPT male with a 3/8 Flare adapter (icluded). LP Hose with a quick discoect ad fittigs are icluded. Operatig pressure: 11.0 W.C. CAUTION! Before coectig LP tak to regulator, check that all burers are i the OFF positio ad the lid has bee removed. To coect the LP regulator/hose assembly to the tak/valve assembly, first make sure the mai valve o the tak is completely closed. Although the flow of gas is stopped whe the Type 1 system is discoected as part of its safety feature, you should always tur off the LP tak mai valve (Fig. 23) after each use ad durig trasport of the tak or uit. Isert the regulator ilet ito the tak valve ad tur the black coupler clockwise util the coupler tightes up. Do ot overtighte the coupler. Tur the mai tak valve o, push ad tur the burer cotrol valves o the uit to the HI positio for about 20 secods to allow the air i the system to purge, tur valves off ad wait 5 miutes before attemptig to light the burers. To discoect the coupler, first make sure the mai tak valve is tured off. Grasp the coupler ad tur couter clockwise. The ilet will the disegage. Remove the ilet from the tak valve opeig if it has ot already doe so whe it disegaged. Your local LP fillig statio should be equipped with the proper equipmet to fill your tak. LP TANK REQUIREMENTS: A deted or rusty LP tak may be hazardous ad should be checked by your LP supplier. The cylider that is used must have a collar to protect the cylider valve. Never use a cylider with a damaged valve. Always check for leaks after every LP tak chage. The LP gas cylider must be costructed ad marked i accordace with the specificatios for LP gas cyliders of the U.S. Departmet of Trasportatio (DOT or CAN/CSA-B339) ad desiged for use with a Type 1 system oly. Do ot chage the regulator/hose assembly from that supplied with the uit or attempt to use a Type 1 equipped regulator/hose assembly with a stadard 510 POL tak/valve assembly. The cylider must be provided with a shut-off valve termiatig i a LP gas supply cylider valve outlet specified, as applicable, for coectio Type 1. If the appliace is stored idoors, the cylider must be discoected ad removed from the appliace. Cyliders must be stored outdoors i a well-vetilated area out of the reach of childre. Note: Whe a LP uit is directly attached ito a LP house system, the stepdow regulator MUST be used to reduce the supply pressure to a max. 14 W.C. ad mi. 11 W.C. to the outdoor appliace regulator. Threadig compoud must be resistat to LP gas Type 1 Regulator Mai Tak Valve Bottom of uit 1/2 female NPT x 3/8 male f lare (istalled o uit) Note: Do ot put threadig compoud o male threads of f lare f ittig Type 1 Tak LP Regulator hose assembly 11" W.C. (istalled o uit) *Istallatio must coform with local codes or with the Natioal Fuel Gas Code ANSI Z223.1 or the CSA B149.2 Propae Istallatio Code 17 Fig. 23 LP Gas