Brake. FAT 1200 ref: Specifications. Utilization. Fabricant

Dimension: px

Commencer à balayer dès la page:

Download "Brake. FAT 1200 ref: Specifications. Utilization. Fabricant"

Suzanne Alain
il y a 7 ans
Total affichages :

Specifications Fabricant Nominal torque (Nm) 120 Minimal torque (Nm) 1,20 Coil resistance - 20 C (ohms) 12,50 Rated current DC (A) 1,10 Rotor inertia (kg.m 2 ) 26,5.

1 Specifications Fabricant Nominal torque (Nm) 120 Minimal torque (Nm) 1,20 Coil resistance - 20 C (ohms) 12,50 Rated current DC (A) 1,10 Rotor inertia (kg.m 2 ) 26, Weight (kg) 17 Heat dissipation continuous sustained (W)* 275 Brake FAT 1200 ref: * Heat dissipation is the mechanical power (P = cw) maximum allowable. 2 terminals Utilization Mounting must be made without any stress. Lubricated for life (other internal lubrication not allowed). The shaft should be lubricated upon assembly, to prevent seizing. Low DC current power supply for coil. (See MEROBEL Electronic data sheets ) The standard device is designed for horizontal shaft orientation, and a minimal speed of 60 RPM. Maximum speed is 2000 RPM (without exceeding the max. heat dissipation capability). For Engineering application, please contact our technical support. In normal use, the outside temperature of the device can increase up to 100 C, without damage. Current A

Safety If the device is to be used in dusty, humid or corrosive environment, special protection needs to be considered. To protect the device from overheating, a thermal sensor can be added.

2 Safety If the device is to be used in dusty, humid or corrosive environment, special protection needs to be considered. To protect the device from overheating, a thermal sensor can be added. Maintenance Two procedures are available: - Full inhouse maintenance servicing: Please call +33 / Spare parts or repair kits (depending on maintenance level): - Kit (powder, ball bearings, seals, felts) ref: Coil ref: Rotor ref: In any case, our After Sales service is at your disposal. Recommended mounting principles FAT ref: Fixing flange Rotating shaft Rotation stop system (type silent bloc ) External frame Zone industrielle Ferrières - France Tel.: Zone 33 2 industrielle Fax: 33 Ferrières France 45 Internet Tel.: 33 Adress: Fax: Internet Adress:

3 Specifications Fabricant Nominal torque (Nm) 120 Minimal torque (Nm) 1,20 Coil resistance - 20 C (ohms) 12,50 Rated current DC (A) 1,10 Rotor inertia (kg.m 2 ) 26, Weight (kg) 25 Heat dissipation (W)* continuous sustained without ventilation 550 continuous sustained with MEROBEL ventilation 1900 Brake FRAT 1200 ref: * Heat dissipation is the mechanical power (P = cw) maximum allowable. 2 terminals Utilization Mounting must be made without any stress. Lubricated for life (other internal lubrication not allowed). The shaft should be lubricated upon assembly, to prevent seizing. Low DC current power supply for coil. (See MEROBEL Electronic data sheets ) The standard device is designed for horizontal shaft orientation, and a minimal speed of 60 RPM. Maximum speed is 2000 RPM (without exceeding the max. heat dissipation capability). For Engineering application, please contact our technical support. In normal use, the outside temperature of the device can increase up to 100 C, without damage. Current A

4 Safety If the device is to be used in dusty, humid or corrosive environment, special protection needs to be considered. To protect the device from overheating, a thermal sensor can be added. Maintenance Two procedures are available: - Full inhouse maintenance servicing: Please call +33 / Spare parts or repair kits (depending on maintenance level): - Kit (powder, ball bearings, seals, felts) ref: Coil ref: Rotor ref: In any case, our After Sales service is at your disposal. Recommended mounting principle FRAT ref: Fixing flange Rotating shaft Rotation stop system (type silent bloc ) External frame Zone industrielle Ferrières - France Tel.: Fax: Internet Adress:

5 Technical Features Voltage (VDC) 24 Power consumption (W) 36 Weight (kg) 11 Max heat dissipation for continuous sustained FAT1200 (W) 1300 Axial Fan Cooling Unit Ventilation axiale VA 1200 Ref. ME Caractéristiques techniques Alimentation Courant Continu (VCC) 24 Puissance consommée (W) 36 Masse (kg) 11 Puissance dissipée en régime permanent du frein FAT1200 (W) 1300 Ø fitted to the brake ajusté au frein Outlet for brake cable Sortie cable du frein Outlet for fan cable Sortie cable ventilateur Utilization / Utilisation This cooling system has been designed to be mounted on the MEROBEL FAT1200 brake (ref: ME ) Ce ventilateur est prévu pour être monté sur un frein de type FAT1200 de la gamme MEROBEL (Ref : ME ). Option 115 or 230V available as an option - Consult your local supplier Alimentation 115 ou 220V en option - Consulter votre distributeur

6 VA ref : ME Mounting procedure / Montage 1 - Fix the brake on the machine frame 2 - Screw the two cables on the brake s terminals. 3 - Screw the cooling unit cable on the connector 4 - Slip the brakes cables and the cooling unit s cable through the relative outlets of the cooling unit frame 5 - Mount the cooling Fan Unit on the brake firmly, until the unit is seatted on the step 1 - Fixer le frein sur le bâti de la machine 2 - Raccorder les cables sur les 2 bornes du frein 3 - Raccorder un cable d alimentationsur le connecteur du système de ventilation 4 - Enfiler les 2 cables du frein et le cable du système de ventilation dans les sorties prévues à cet effet sur le carter de ventilation 5 - Monter l ensemble de ventilation sur le frein, en appuyant fortement jusqu au contact en butée After Sales Service / SAV - Consult your local supplier - Consulter votre distributeur FTC ME ZI - BP Ferrieres - FRANCE Tel Fax merobel@merobel.com

7 Caractéristiques techniques Fabricant Tension nominale (V) 230 Fréquence (Hz) 50 Masse (kg) 5,5 Puissance (W) 242 Intensité nominale (Amp) 1,1 Niveau sonore (dba) 67 Indice de protection IP44 Technical Features Voltage (V) 230 Frequency (Hz) 50 Power (W) 242 Weight (kg) 5.5 Amperage (Amp) 1.1 Sound Level (dba) 67 Protection level IP44 Ventilation radiale Radial Fan Cooling Unit VR 1200/2002 ref : ME Utilisation / Utilization Ce ventilateur est livré avec trois vis HM6x16 et trois rondelles ZU6 pour fixation sur le radiateur du frein This cooling unit is delivered with three screws HM6x16 and three ZU6 washers to be fixed on the brake s heater.

8 Ventilation1200/ ref :ME Montage / Mounting procedure Monter le support du ventilateur sur le frein, en venant en butée sur les trois pattes de fixation, du coté souhaité. Monter l entretoise, la vis, la rondelle et serrer l écrou. Pour le FRAT 350, 650, 1200 et 2200, percer puis tarauder le radiateur à l endroit des pattes de fixation. Monter les trois vis M6x16 livrées. Monter le ventilateur selon l orientation souhaité, à l aide des 4 vis et des 4 écrous. Raccorder électriquement à la boite à bornes.... SAV / After Sales Service - prise en charge de la réparation sur devis par notre service spécialisé. MEROBEL SAV Tél. : +33/(0) ZI BP 79 Fax : +33/(0) Ferrières FRANCE - Please contact your local resaler, or distributor. Zone industrielle BP Ferrières - France Tel.: +33/(0) Fax: +33/(0) Internet :

Documents pareils

Fabricant. 2 terminals

Fabricant. 2 terminals Specifications Fabricant Nominal torque (Nm) 65 Minimal torque (Nm) 0,63 Coil resistance - 20 C (ohms) 20 Rated current DC (A) 1 Rotor inertia (kg.m 2 ) 2.10-3 Weight (kg) 7,20 Heat dissipation continuous