MVH-X370BT. Owner s Manual Mode d emploi Manual de instrucciones DIGITAL MEDIA RECEIVER RÉCEPTEUR MÉDIA NUMÉRIQUE RECEPTOR DE MEDIOS DIGITALES

Transcription

1 DIGITAL MEDIA RECEIVER RÉCEPTEUR MÉDIA NUMÉRIQUE RECEPTOR DE MEDIOS DIGITALES MVH-X370BT English Français Español Owner s Manual Mode d emploi Manual de instrucciones Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. Important (Numéro de série) Le numéro de série se trouve au bas de cet appareil. Pour votre sécurité et votre commodité, veillez à noter ce numéro sur la carte de garantie fournie. Importante (Número de serie) El número de serie se encuentra en la parte inferior de esta unidad. Por su propia seguridad y comodidad, asegúrese de anotar este número en la tarjeta de garantía que se adjunta.

2 Table of Contents Before You Start... 3 Getting Started... 4 Radio... 7 USB/iPod/AUX... 7 Bluetooth... 9 App Mode Pandora Settings FUNCTION settings AUDIO settings SYSTEM settings ILLUMINATION settings MIXTRAX settings Connections/Installation Additional Information About this manual: In the following instructions, a USB memory or USB audio player are referred to as USB device. In this manual, ipod and iphone are referred to as ipod. 2 En

3 Before You Start Thank you for purchasing this PIONEER product To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. FCC ID: AJDK071 MODEL NO.: MVH-X370BT IC: 775E-K071 This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The Bluetooth antenna cannot be removed (or replaced) by user. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person s body (excluding extremities: hands, wrists, feet and ankles). Over time, your hearing comfort level adapts to higher volumes of sound, so what sounds normal can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. ESTABLISH A SAFE LEVEL: Set your volume control at a low setting. Slowly increase the sound until you can hear it comfortably and clearly, without distortion. Once you have established a comfortable sound level, set the dial and leave it there. BE SURE TO OBSERVE THE FOLLOWING GUIDELINES: Do not turn up the volume so high that you can t hear what s around you. Use caution or temporarily discontinue use in potentially hazardous situations. Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas. WARNING Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards. Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the device. Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defect or other reproductive harm. Wash hands after handling. English Alteration or modifications carried out without appropriate authorization may invalidate the user s right to operate the equipment. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. The Safety of Your Ears is in Your Hands Get the most out of your equipment by playing it at a safe level a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. CAUTION Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids. Always keep the volume low enough to hear outside sounds. If you experience problems Should this unit fail to work properly, please contact your dealer or nearest authorized PIONEER Service Station. After-sales service for Pioneer products Please contact the dealer, distributor from where you purchased this unit or the authorized PIONEER Service Station for after-sales service or any other information. In case the necessary information is not available, please contact the companies listed below: Please do not ship your unit to the companies at the addresses listed below for repair without contacting them in advance. En 3

4 U.S.A. Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA CANADA Pioneer Electronics of Canada, Inc. CUSTOMER SATISFACTION DEPARTMENT 340 Ferrier Street Unit 2 Markham, Ontario L3R 2Z5, Canada For warranty information please see the Limited Warranty sheet included with this unit. Getting Started Basic operation MVH-X370BT SRC (source)/off M.C. (multi-control) dial Display window BAND/ /DIMMER Display button* * This button is referred to as DISP in this manual. Detach button Remote Control / VOLUME +/ MUTE SRC (source) DISP (display) 4 En

5 Frequently used operations Operation Purpose Head Unit Remote Control Turn on the power* Press SRC/OFF to turn on the power. Press and hold SRC/OFF to turn off the power. Press SRC to turn on the power. Press and hold SRC to turn off the power. Adjust the volume Turn the M.C. dial. Press VOLUME + or. Press MUTE to mute the unit. Press again to unmute. Select a source Press SRC/OFF repeatedly. Press SRC repeatedly. Change the display information Press DISP repeatedly. Press DISP repeatedly. Return to the previous display/list Return to the normal display from the menu. * When this unit s blue/white lead is connected to the vehicle s auto-antenna relay control terminal, the vehicle s antenna extends when this unit s source is turned on. To retract the antenna, turn the source off. Display indication Press /DIMMER. Press / to select the next/previous folder. Press BAND/. Answering a call Press. Press. Ending a call Press. Press. Indication Description Appears when a lower tier of the menu or folder exists. Appears when the automatic answering function is set (page 10). Appears when the button is pressed. Appears when the local seek tuning function is set (page 13). Appears when the sound retriever function is set (page 13). Appears when random/shuffle play is set (except when BT AUDIO is selected as the source). Appears when repeat play is set (except when BT AUDIO is selected as the source). Appears when the ipod control function is set (page 8). Indication Description Appears when a Bluetooth connection is made (page 9). Detaching the front panel Detach the front panel to prevent theft. Remove any cables and devices attached to the front panel and turn off the unit before detaching it. Detach Attach Important Avoid subjecting the front panel to excessive shock. Keep the front panel out of direct sunlight and high temperatures. Always store the detached front panel in a protective case or bag. Preparing the remote control Remove the insulation sheet before use. How to replace the battery Insert the CR2025 (3 V) battery with the plus (+) and minus ( ) poles orientated properly. English En 5

6 WARNING Keep the battery out of the reach of children. Should the battery be swallowed, consult a doctor immediately. Do not expose the battery or remote control to excessive heat such as direct sunlight or fire. CAUTION There is a potential danger of explosion if the battery is incorrectly replaced. When replacing the battery, replace it with the same type. Do not handle or store the battery with metallic tools or objects. If the battery leaks, remove the battery and wipe the remote control completely clean. Then install a new battery. When disposing of used batteries, compliance with governmental regulations or environmental institutions rules that apply in your country/area must be followed that pertain to any special handling needed for disposal. Perchlorate Material - special handling may apply. See (Applicable to California, U.S.A.) Important Do not store the remote control in high temperatures or direct sunlight. Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal. Setting the clock (CLOCK SET) When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the display. 1 Press the M.C. dial. The setup menu disappears after 30 seconds of no operation. If you prefer not to set at this time, turn the M.C. dial to select [NO], then press to confirm. 2 Turn the M.C. dial to adjust the hour, then press to confirm. The indicator moves to the minute setting automatically. 3 Turn the M.C. dial to adjust the minute, then press to confirm. [QUIT] appears. 4 Turn the M.C. dial to select [YES], then press to confirm. NOTES You can cancel the menu setting by pressing SRC/OFF. This setting can be made at any time. See page 14 for more details. 2 Turn the M.C. dial to select [SYSTEM], then press to confirm. 3 Turn the M.C. dial to select [DEMO OFF], then press to confirm. 4 Turn the M.C. dial to select [YES], then press to confirm. INITIAL settings 1 Press and hold SRC/OFF until the unit turns off. 2 Press the M.C. dial to display the main menu. 3 Turn the M.C. dial to select [INITIAL], then press to confirm. 4 Turn the M.C. dial to select an option, then press to confirm. Menu Item SP-P/O MODE [REAR/SUB.W] [SUB.W/SUB.W] [REAR/REAR] S/W UPDATE SYSTEM RESET [YES], [CANCEL] Description Select when there is a full-range speaker connected to the rear speaker output leads and there is a subwoofer connected to the RCA output. Select when there is a passive subwoofer connected directly to the rear speaker output leads and there is a subwoofer connected to the RCA output. Select when there are full-range speakers connected to the rear speaker output leads and RCA output. If there is a full-range speaker connected to the rear speaker output leads, and the RCA output is not used, you may select either [REAR/SUB.W] or [REAR/REAR]. Select to update the unit to the latest Bluetooth software. For details on Bluetooth software and updating, visit our website. Select [YES] to initialize the unit settings. The unit will be restarted automatically. (Some of the settings will be retained even after resetting the unit, such as Bluetooth pairing information, etc.) Canceling the demonstration display (DEMO OFF) 1 Press the M.C. dial to display the main menu. 6 En

7 Radio The tuner frequencies on this unit are allocated for use in North America. Use in other areas may result in poor reception. USB/iPod/AUX Playing back Receiving preset stations 1 Press SRC/OFF to select [RADIO]. 2 Press BAND/ to select the band from [FM1], [FM2], [FM3] or [AM]. 3 Press a number button (1/ to 6/ ). Disconnect headphones from the device before connecting it to the unit. USB port English TIP The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the FUNCTION settings (page 13). Best stations memory (BSM) The six strongest stations are stored on the number buttons (1/ to 6/ ). 1 After selecting the band, press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select [FUNCTION], then press to confirm. 3 Turn the M.C. dial to select [BSM], then press to confirm. To seek a station manually 1 After selecting the band, press / to select a station. Press and hold / then release to seek an available station. Scanning stops when the unit receives a station. To cancel seek tuning, press /. NOTE [SEEK] needs to be set to [MAN] in the FUNCTION settings (page 13). To store stations manually 1 While receiving the station you want to store, press and hold one of the number buttons (1/ to 6/ ) until it stops flashing. M.C. (multi-control) dial SRC (source)/off AUX input jack (3.5 mm stereo jack) USB device/ipod 1 Open the USB port cover. 2 Plug in the USB device/ipod using an appropriate cable. CAUTION Use an optional Pioneer USB cable (CD-U50E) to connect the USB storage device as any device connected directly to the unit will protrude out from the unit, which could be dangerous. Before removing the device, stop playback. MTP connection A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable supplied with the device. However, depending on the connected device and the numbers of the files in the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is not compatible with WAV file formats, and cannot be used with the MIXTRAX function. AUX 1 Insert the stereo mini plug into the AUX input jack. 2 Press SRC/OFF to select [AUX] as the source. En 7

8 NOTE If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source. Operations You can make various adjustments in the FUNCTION settings (page 13). Note that the following operations do not work for an AUX device. To operate an AUX device, use the device itself. Purpose Operation Select a folder/album* Press 1/ or 2/. Select a track/song (chapter) Press or. Fast forward or reverse Press and hold or. Search for a file from a list 1 Press to display the list. 2 Turn the M.C. dial to select the desired file (folder) name or category, then press to confirm. 3 Turn the M.C. dial to select the desired file, then press to confirm. Playback starts. View a list of the files in the selected folder/ category* Play a song in the selected folder/category* Press the M.C. dial when a folder/category is selected. Press and hold the M.C. dial when a folder/ category is selected. Alphabetical search (ipod only) 1 Press to display the list. 2 Turn the M.C. dial to select the desired category list, then press to enter the alphabetical search mode. (Turning the M.C. dial twice also enters the alphabetical search mode.) 3 Turn the M.C. dial to select a letter, then press to display the alphabetical list. To cancel alphabetical search, press / DIMMER. Repeat play Press 6/. Random/shuffle play Press 5/. Shuffle all play (ipod only) Press and hold 5/. Pause/resume playback Press 4/PAUSE. Return to root folder (USB only)* Press and hold BAND/. Purpose Change drives in USB device (Devices that support the USB mass storage device class protocol only) * Compressed audio files only Useful functions for ipod Operation Press BAND/. Link play mode You can access songs based on the artist, album, or genre currently playing. 1 While listening to a song, press and hold to enter the link play mode. 2 Turn the M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then press to confirm. The selected song/album will be played after the currently playing song. NOTE The selected song/album may be canceled if you use functions other than those from the link play mode (e.g. fast forward and reverse). ipod control You can control the unit via a connected ipod. The following ipod models are not compatible with this function. ipod nano 1st generation, ipod with video 1 Press BAND/ during playback, then select the control mode. [CONTROL ipod/ctrl ipod]: The unit s ipod function can be operated from the connected ipod. [CONTROL AUDIO/CTRL AUDIO]: The unit s ipod function can only be operated by the buttons on the unit or supplied remote control. In this mode, the connected ipod cannot be turned on or off. NOTES Switching the control mode to [CONTROL ipod/ctrl ipod] pauses song playback. Use the connected ipod to resume playback. The following operations are still accessible from the unit, even if the control mode is set to [CONTROL ipod/ctrl ipod]. Pause, fast forward/reverse, song/chapter selection The volume can only be adjusted from the unit. 8 En

9 About MIXTRAX (USB/iPod only) The MIXTRAX function creates a non-stop mix of your music library, accompanied by illumination effects. For details on MIXTRAX settings, see page 15. NOTES This function is not compatible with an Android device connected via MTP. When USB is selected as a source and the MIXTRAX function is in use, the sound retriever function is disabled. Depending on the file/song, sound effects may not be available. Turn the MIXTRAX function off if the illumination effects it produces interfere with driving. 1 Press 3/MIX to turn MIXTRAX on/off. Bluetooth Bluetooth connection Important If three or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may not work properly. 1 Turn on the Bluetooth function of the device. 2 Press and hold to display the connection menu. 3 Turn the M.C. dial to select [ADD DEVICE], then press to confirm. The unit starts to search for available devices, then displays them in the device list. To cancel searching, press the M.C. dial. If the desired device is not in the list, select [RE-SEARCH]. If there is no device available, [NOT FOUND] appears in the display. 4 Turn the M.C. dial to select a device from the device list, then press to confirm. Press and hold the M.C. dial to switch the displayed device information between the Bluetooth device address and device name. 5 Select [Pioneer BT Unit] shown in the device display. 6 Make sure the same 6-digit number appears on this unit and the device, then select Yes on the device. NOTES [DEVICE FULL] appears if the unit has already been paired with three other devices. In this case, delete one of the paired devices. See [DEL DEVICE] or [GUEST MODE] in the connection menu (page 9). Depending on the device, the PIN code is required in step 6. In this case, input [0000]. TIP The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so, [VISIBLE] in the connection menu needs to be set to [ON]. For details on a Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device. Connection menu Menu Item DEVICELIST DEL DEVICE [DELETE YES], [DELETE NO] ADD DEVICE A.CONN [ON], [OFF] VISIBLE [ON], [OFF] PIN CODE DEV. INFO GUEST MODE [ON], [OFF] A.PAIRING [ON], [OFF] Description Display the list of paired Bluetooth devices. * appears on the device name when the Bluetooth connection is established. Delete the device information. Register a new device. Bluetooth telephone Select [ON] to connect to a Bluetooth device automatically. Select [ON] so that a Bluetooth device can detect the unit when the unit is connected via Bluetooth to another device. Change the PIN code. 1 Press the M.C. dial to display the setting mode. 2 Turn the M.C. dial to select a number. 3 Press the M.C. dial to move the cursor to the next position. 4 After inputting the PIN code, press and hold the M.C. dial. After inputting the PIN code, pressing the M.C. dial returns you to the PIN code input display, and you can change the PIN code. Switch the device information on the display between the device name and Bluetooth device address. Select [ON] to move to the [DEL DEVICE] screen automatically when the unit has already been paired with three devices. Select [ON] to pair the unit and iphone automatically when an iphone is connected to the unit via USB. (This function may not be available depending on the version of ios you are using.) First, make a Bluetooth connection with the Bluetooth telephone (page 9). Up to two Bluetooth telephones can be connected simultaneously. English En 9

10 Important Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running can drain the vehicle s battery. Be sure to park your vehicle in a safe place and apply the parking brake before operation. To make a phone call 1 Press to display the phone menu. When two phones are connected, a phone name appears first then a phone menu will display. To switch to another phone, press again. 2 Turn the M.C. dial to select [MISSED], [DIALED], [RECEIVED] or [PHONE BOOK], then press to confirm. The phone number list appears. 3 Turn the M.C. dial to select a name or phone number, then press to confirm. The phone call starts. To answer an incoming call 1 Press when a call is received. TIP When two phones are connected to the unit via Bluetooth and there is an incoming call while one phone is being used for a call, a message will appear in the display. To answer that incoming call, you need to end the existing call. Basic operations Purpose Operation End a call Press. Reject an incoming call Press and hold when a call is received. Switch between the current caller Press the M.C. dial. and a caller on hold Cancel a caller on hold Press and hold. Adjust the volume of the caller s Turn the M.C.dial during the call. voice (When private mode is on, this function is not available.) Turn the privacy mode on or off Press BAND/ during the call. To preset phone numbers 1 Select a phone number from a phone book or call history. 2 Press and hold one of the number buttons (1/ to 6/ ). The contact is stored in the selected preset number. To make a call using a preset number, press one of the number buttons (1/ to 6/ ), then press the M.C. dial. Voice recognition (Only for iphone) This function is only available when an iphone equipped with voice recognition is connected to the unit via Bluetooth. 1 Press and hold the M.C. dial to activate the voice recognition mode. 2 Press the M.C. dial and then talk into the microphone to input voice commands. To exit the voice recognition mode, press BAND/. NOTE For details on the voice recognition features, refer to the manual supplied with your iphone. Phone menu Menu Item MISSED DIALED RECEIVED PHONE BOOK*1 PRESET 1-6 PHONE FUNC A.ANSR:*2 [ON], [OFF] Description Display the missed call history. Display the dialed call history. Display the received call history. Display the contacts which have been transferred from your phone. Set [VISIBLE] in the connection menu to [ON] to browse the contacts via this unit. Recall the preset phone numbers. You can also recall the preset phone numbers by pressing one of the number buttons (1/ to 6/ ). Select [ON] to answer an incoming call automatically. 10 En

11 Menu Item R.TONE: [ON], [OFF] PB INVT Description Select [ON] if the ring tone does not come out from the car speakers. Depending on the connected phone, this function may not work. Invert the order of names in the phone book (name view). *1 The contacts on your phone will normally be transferred automatically when the phone is connected. If they are not, use your phone to transfer the contacts. *2 If two phones are connected, this function does not work on incoming calls that are received while one of the phones is being used for a call. Purpose Operation Search for a file from a list 1 Press to display the list. 2 Turn the M.C. dial to select the desired folder name, then press to confirm. 3 Turn the M.C. dial to select the desired file, then press to confirm. Playback starts. * Depending on the connected device, these operations may not be available. English Bluetooth audio Important Depending on the Bluetooth audio player connected to this unit, the available operations will be limited to the following two levels: A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player. AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback, pause, select song, etc. The sound of the Bluetooth audio player will be muted when the phone is in use. When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone automatically. Depending on the type of Bluetooth audio player you have connected to this unit, operation and information displayed may vary based on availability and functionality. 1 Make a Bluetooth connection with the Bluetooth audio player. 2 Press SRC/OFF to select [BT AUDIO] as the source. 3 Press BAND/ to start playback. Basic operations You can make various adjustments in the FUNCTION settings (page 13). Purpose Operation Fast forward or reverse Press and hold or. Select a track Press or. Repeat play* Press 6/. Random play* Press 5/. Pause/resume playback Press 4/PAUSE. App Mode You can enjoy listening to an application on an iphone/android device via the unit. In some cases, you can control an application by using the unit. For details on compatible devices, visit our website. Important Use of third party apps may involve or require the provision of personally identifiable information, whether through the creation of a user account or otherwise, and for certain applications, the provision of geolocation data. ALL THIRD PARTY APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING WITHOUT LIMITATION COLLECTION AND SECURITY OF USER DATA AND PRIVACY PRACTICES. BY ACCESSING THIRD PARTY APPS, YOU AGREE TO REVIEW THE TERMS OF SERVICE AND PRIVACY POLICIES OF THE PROVIDERS. IF YOU DO NOT AGREE WITH THE TERMS OR POLICIES OF ANY PROVIDER OR DO NOT CONSENT TO THE USE OF GEOLOCATION DATA WHERE APPLICABLE, DO NOT USE THAT THIRD PARTY APP. For iphone users This function is compatible with iphones and ipod touches installed with ios 5.0 or later. For Android device users This function is compatible with devices that have Android OS 2.3 or later installed and also support Bluetooth SPP (Serial Port Profile) and A2DP (Advance Audio Distribution Profile). NOTE PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT LIMITATION THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF SUCH APPS ARE THE SOLE RESPONSIBILITY OF THE APP PROVIDER. Playback of an application via the unit 1 Connect this unit with the mobile device. iphone via USB (page 7) Android device via Bluetooth (page 9) En 11

12 2 Press the M.C. dial to display the main menu. 3 Turn the M.C. dial to select [SYSTEM], then press to confirm. 4 Turn the M.C. dial to select [APP CONN.SET], then press to confirm. 5 Turn the M.C. dial to select one of the below, then press to confirm. Select [WIRED] for iphone. Select [BLUETOOTH] for an Android device. 6 Press SRC/OFF to select [APP]. 7 Operate the mobile device to start up the application. Basic operations You can make various adjustments in the FUNCTION settings (page 13). Purpose Operation Select a track Press or. Fast forward or reverse Press and hold or. Pause/resume playback Press BAND/. Pandora Pandora internet radio is a music service not affiliated with Pioneer. More information is available at The Pandora mobile application is available for iphone and Android phones. Please visit for the latest compatibility information. Listening to Pandora Update the firmware of the Pandora application to the latest version before use. 1 Connect this unit with the mobile device. iphone via USB (page 7) Android device via Bluetooth (page 9) 2 Press the M.C. dial to display the main menu. 3 Turn the M.C. dial to select [SYSTEM], then press to confirm. 4 Turn the M.C. dial to select [APP CONN.SET], then press to confirm. 5 Turn the M.C. dial to select one of the below, then press to confirm. Select [WIRED] for iphone. Select [BLUETOOTH] for an Android device. 6 Press SRC/OFF to select [PANDORA]. 7 Launch the Pandora application on the mobile device and start playback. Basic operations You can make various adjustments in the FUNCTION settings (page 13). Purpose Operation Skip a track Press. Switch between Shuffle and the Press (list), then turn the M.C. dial to select the station Shuffle or the desired station. Change the sort order Press (list), then select one of the following. [ABC]: Sort the items in the list alphabetically. [DATE]: Sort the items in the list in order of the dates on which the items were created. Play When Shuffle or the station is selected, press the M.C. dial. Delete a station 1 When the station is selected, press and hold the M.C. dial. [DELETE YES] appears. 2 Press the M.C. dial. To cancel, press /DIMMER in step 1. Pause/resume playback Press 4/PAUSE. Thumbs Up Press 1/. Thumbs Down Press 2/. Create a new station based on the Press and hold 5/. track currently being played Create a new station based on the artist currently being played Press and hold 6/. NOTE Some functions of Pandora may not be operated from the unit. 12 En

13 Settings You can adjust various settings in the main menu. 1 Press the M.C. dial to display the main menu. 2 Turn the M.C. dial to select one of the categories below, then press to confirm. FUNCTION settings (page 13) AUDIO settings (page 13) SYSTEM settings (page 14) ILLUMINATION settings (page 15) MIXTRAX settings (page 15) 3 Turn the M.C. dial to select the options, then press to confirm. FUNCTION settings The menu items vary according to the source. Menu Item BSM LOCAL FM: [OFF], [LV1], [LV2], [LV3], [LV4] AM: [OFF], [LV1], [LV2] SEEK Description Store the six strongest stations on the number buttons (1/ to 6/ ) automatically. Restrict the tuning station according to the signal strength. [MAN], [PCH] Assign / buttons to seek the stations one by one (manual tuning) or select a station from the preset channels. Menu Item AUDIO BOOK ipod [FASTER], [NORMAL], [SLOWER] BOOKMARK NEW STATION [FROM TRACK], [FROM ARTIST] PAUSE PLAY STOP AUDIO settings Menu Item FADER*1 BALANCE Description Change the playback speed. (Not available when [CONTROL ipod/ctrl ipod] is selected in the control mode.) Store the track information currently being played in your Pandora account. Create a new station based on the track or artist currently being played. Pause or resume playback. Start playback. Stop playback. Description Adjust the front and rear speaker balance. Adjust the left and right speaker balance. English SEL DEVICE Connect a Bluetooth device in the list. S.RTRV USB ipod [1] (effective for low compression rates), [2] (effective for high compression rates), [OFF] Enhance compressed audio and restore rich sound. (Not available when USB is selected as a source and the MIXTRAX function is set to on.) En 13

14 Menu Item EQ SETTING [SUPER BASS], [POWERFUL], [NATURAL], [VOCAL], [CUSTOM1], [CUSTOM2], [FLAT] Select an equalizer band and level for further customizing. Equalizer band: [80HZ], [250HZ], [800HZ], [2.5KHZ], [8KHZ] Equalizer level: [+6] to [ 6] Select or customize the equalizer curve. [CUSTOM1] can be set separately for each source. However, each of the below combinations are set to the same setting automatically. USB, ipod, and APP (iphone) USB, ipod, PANDORA (iphone), and APP (iphone) BT AUDIO, PANDORA (Android), and APP (Android) [CUSTOM2] is a shared setting used for all sources. LOUDNESS [OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume. SUB.W*2 [NOR], [REV], [OFF] Select the subwoofer phase. SUB.W CTRL*2*3 Cut-off frequency: [50HZ], Only frequencies lower than those in the [63HZ], [80HZ], [100HZ], [125HZ], selected range are output from the subwoofer. [160HZ], [200HZ] Output level: [ 24] to [+6] Slope level: [ 12], [ 24] BASS BOOST [0] to [+6] Select the bass boost level. HPF SETTING Cut-off frequency: [OFF], [50HZ], [63HZ], [80HZ], [100HZ], [125HZ], [160HZ], [200HZ] Slope level: [ 12], [ 24] SLA Description Only frequencies higher than the high-pass filter (HPF) cutoff are output from the speakers. [+4] to [ 4] Adjust the volume level for each source except FM. Each of the below combinations are set to the same setting automatically. USB, ipod, PANDORA (iphone), and APP (iphone) BT AUDIO, PANDORA (Android), and APP (Android) *1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 6). *2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 6). *3 Not available when [OFF] is selected in [SUB.W]. SYSTEM settings You can also access to these menus when the unit is turned off. Menu Item CLOCK SET 12H/24H [12H], [24H] AUX [ON], [OFF] BT AUDIO [ON], [OFF] PANDORA [ON], [OFF] BT MEM CLEAR [YES], [CANCEL] BT VERSION APP CONN. SET* [WIRED], [BLUETOOTH] Description Set the clock (page 6). Select the time notation. * Not available when [PANDORA] or [APP] is selected as the source. Set to [ON] when using an auxiliary device connected to the unit. Set the Bluetooth signal on/off. Set to [ON] when using the Pandora function. Clear the Bluetooth device data (device list, PIN code, call history, phone book, preset phone numbers) stored in the unit. [CLEARED] appears when data is successfully deleted. Displays the system version of the unit and the Bluetooth module. Select the appropriate connection method according to your device. 14 En

15 ILLUMINATION settings Menu Item DIM SETTING [SYNC CLOCK], [MANUAL] BRIGHTNESS Description Change the display brightness. [1] to [10] Change the display brightness. The available setting ranges differ depending on [DIM SETTING]. English MIXTRAX settings Menu Item SHORT MODE [1.0 MIN], [1.5 MIN], [2.0 MIN], [2.5 MIN], [3.0 MIN], [OFF] MIX PATTERN [SOUND LEVEL] [LOW PASS] [RANDOM] DISP FX [ON], [OFF] CUT IN FX [ON], [OFF] Description Select the length of the playback time. Change the MIXTRAX special effects according to the audio level. The mix pattern changes according to the sound level. The mix pattern changes according to the bass level. The mix pattern changes randomly according to the sound level mode and low pass mode. Set the MIXTRAX special effects on/off. Turn the MIXTRAX sound effects on/off while manually changing the tracks. En 15

16 Connections/Installation Connections WARNING Use speakers over 50 W (output value) and between 4 Ω to 8 Ω (impedance value). Do not use 1 Ω to 3 Ω speakers for this unit. The black cable is ground. When installing this unit or power amp (sold separately), make sure to connect the ground wire first. Ensure that the ground wire is properly connected to metal parts of the car s body. The ground wire of the power amp and the one of this unit or any other device must be connected to the car separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire, generation of smoke or malfunction. Ground wire POWER AMP Other devices (Another electronic device in the car) *1 Not supplied for this unit Metal parts of car s body Important When installing this unit in a vehicle without an ACC (accessory) position on the ignition switch, failure to connect the red cable to the terminal that detects operation of the ignition key may result in battery drain. ACC position No ACC position Use this unit with a 12-volt battery and negative grounding only. Failure to do so may result in a fire or malfunction. To prevent a short-circuit, overheating or malfunction, be sure to follow the directions below. Disconnect the negative terminal of the battery before installation. Secure the wiring with cable clamps or adhesive tape. Wrap adhesive tape around wiring that comes into contact with metal parts to protect the wiring. Place all cables away from moving parts, such as the shift lever and seat rails. Place all cables away from hot places, such as near the heater outlet. Do not connect the yellow cable to the battery by passing it through the hole to the engine compartment. Cover any disconnected cable connectors with insulating tape. Do not shorten any cables. Never cut the insulation of the power cable of this unit in order to share the power with other devices. The current capacity of the cable is limited. Use a fuse of the rating prescribed. Never wire the negative speaker cable directly to ground. Never band together negative cables of multiple speakers. When this unit is on, control signals are sent through the blue/white cable. Connect this cable to the system remote control of an external power amp or the vehicle s auto-antenna relay control terminal (max. 300mA 12 V DC). If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal. Never connect the blue/white cable to the power terminal of an external power amp. Also, never connect it to the power terminal of the auto antenna. Doing so may result in battery drain or a malfunction. This unit Microphone 4 m (13 ft. 1 in.) Rear output or subwoofer output Antenna input Power cord input Fuse (10 A) Wired remote input Hard-wired remote control adapter can be connected (sold separately). Microphone input Power cord Perform these connections when not connecting a rear speaker lead to a subwoofer. Perform these connections when using a subwoofer without the optional amplifier. To power cord input Left Right Front speaker Rear speaker White White/black Gray Gray/black Green Green/black Violet Violet/black Black (chassis ground) Connect to a clean, paint-free metal location. Yellow Connect to the constant 12 V supply terminal. Red Connect to terminal controlled by the ignition switch (12 V DC). Blue/white Connect to the system control terminal of the power amp or auto-antenna relay control terminal (max. 300 ma 12 V DC). Subwoofer (4 Ω) 16 En

17 When using a subwoofer of 70 W (2 Ω), be sure to connect the subwoofer to the violet and violet/black leads of this unit. Do not connect anything to the green and green/black leads. Not used. Subwoofer (4 Ω) 2 NOTE Change the initial menu of this unit. Refer to [SP-P/O MODE] (page 6). The subwoofer output of this unit is monaural. Power amp (sold separately) Perform these connections when using the optional amplifier. The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet. Optimum performance is obtained when the unit is installed at an angle of less than 60. When installing, to ensure proper heat dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents. Leave ample space 5 cm Dashboard Mounting sleeve Make sure that the unit is installed securely in place. An unstable installation may cause skipping or other malfunctions. DIN Rear-mount 1 Line up the holes on the mounting bracket with the holes on the sides of the unit to attach the bracket. 2 Screw in one screw on each side to hold the unit in place. Screw Bracket Removing the unit 1 Remove the trim ring. English 5 cm System remote control Connect to blue/white cable. Power amp (sold separately) Connect with RCA cables (sold separately) To rear output or subwoofer output Rear speaker or subwoofer Installation Important Check all connections and systems before final installation. Do not use unauthorized parts as this may cause malfunctions. Consult your dealer if installation requires drilling of holes or other modifications to the vehicle. Do not install this unit where: it may interfere with operation of the vehicle. it may cause injury to a passenger as a result of a sudden stop. DIN front/rear mount This unit can be properly installed using either front-mount or rear-mount installation. Use commercially available parts when installing. DIN Front-mount 1 Insert the mounting sleeve into the dashboard. For installation in shallow spaces, use the supplied mounting sleeve. If there is enough space, use the mounting sleeve that came with the vehicle. 2 Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90 ) into place. Screw Mounting bracket Dashboard or console Use either truss (5 mm 8 mm) or flush surface (5 mm 9 mm) screws, depending on the bracket screw holes. Using the included bracket You can also use the included bracket to mount the unit. Check to make sure that the included bracket matches your particular model of vehicle and then attach it to the unit as shown below. Trim ring Notched tab Releasing the front panel allows easier access to the trim ring. When reattaching the trim ring, point the side with the notched tab down. 2 Insert the supplied extraction keys into both sides of the unit until they click into place. 3 Pull the unit out of the dashboard. En 17

18 To secure the front panel The front panel can be secured with the supplied screw. Screw Installing the microphone The microphone should be placed directly in front of the driver at a suitable distance to pick up their voice clearly. CAUTION It is extremely dangerous to allow the microphone lead to become wound around the steering column or shift lever. Be sure to install the microphone in such a way that it will not obstruct driving. It is recommended to use the clamps (sold separately) to arrange the lead. To install on the sun visor 1 Fit the microphone lead into the groove. Microphone lead Groove Microphone clip To install on the steering column 1 Slide the microphone base to detach it from the microphone clip. Microphone Microphone clip Microphone base 2 Install the microphone on the rear side of the steering column. 2 Install the microphone clip on the sun visor. Lowering the sun visor reduces the voice recognition rate. Double-sided tape 18 En

19 Additional Information Troubleshooting The display automatically returns to the normal display. No operations have been made for about 30 seconds. Perform an operation. The repeat play range changes unexpectedly. Depending on the repeat play range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing. Select the repeat play range again. A subfolder is not played back. Subfolders cannot be played when [FLD] (folder repeat) is selected. Select another repeat play range. The sound is intermittent. You are using a device, such as a cellular phone, that may cause audible interference. Move electrical devices that may be causing the interference away from the unit. The sound from the Bluetooth audio source is not played back. There is a call in progress on a Bluetooth-connected cellular phone. The sound will be played back when the call is terminated. A Bluetooth-connected cellular phone is currently being operated. Stop using the cellular phone. The connection between the unit and the cellular phone is not established correctly after a call made by a Bluetooth-connected cellular phone. Make a Bluetooth connection between the unit and the cellular phone again. Error messages Common AMP ERROR This unit fails to operate or the speaker connection is incorrect. The protective circuit is activated. Check the speaker connection. Turn the ignition switch OFF and back to ON again. If the message remains, contact your dealer or an authorized Pioneer Service Station for assistance. NO XXXX (NO TITLE, for example) There is no embedded text information. Switch the display or play another track/file. USB device/ipod FORMAT READ Sometimes there is a delay between the start of playback and when you start to hear any sound. Wait until the message disappears and you hear sound. NO AUDIO There are no songs. Transfer the audio files to the USB device and connect. The connected USB device has security enabled. Follow the USB device instructions to disable the security. SKIPPED The connected USB device contains DRM protected files. The protected files are skipped. PROTECT All the files on the connected USB device are embedded with DRM. Replace the USB device. N/A USB The connected USB device is not supported by this unit. Disconnect your device and replace it with a compatible USB device. CHECK USB The USB connector or USB cable has short-circuited. Check that the USB connector or USB cable is not caught in something or damaged. The connected USB device consumes more than maximum allowable current. Disconnect the USB device and do not use it. Turn the ignition switch OFF and back to ACC or ON. Connect only compliant USB devices. The ipod operates correctly but does not charge. Make sure the connection cable for the ipod has not shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch OFF and back to ON, or disconnect the ipod and reconnect. ERROR-19 Communication failed. Perform one of the following operations, then return to the USB source. Turn the ignition switch OFF and back to ON. Disconnect the USB device. Change to a different source. ipod failure. Disconnect the cable from the ipod. Once the ipod s main menu is displayed, reconnect the ipod and reset it. ERROR-23 USB device was not formatted properly. Format the USB device with FAT12, FAT16 or FAT32. ERROR-16 The ipod firmware version is old. Update the ipod version. ipod failure. Disconnect the cable from the ipod. Once the ipod s main menu is displayed, reconnect the ipod and reset it. STOP There are no songs in the current list. Select a list that contains songs. NOT FOUND No related songs. Transfer songs to the ipod. Bluetooth device ERROR-10 The power failed for the Bluetooth module of the unit. Turn the ignition switch OFF and back to ACC or ON. Pandora ERROR-19 Communication failed. Disconnect the cable from the device. Once the device s main menu is displayed, reconnect the device and reset it. START UP APP The Pandora application has not started running yet. Start up the Pandora application. English En 19

20 INOPERABLE The operation was disabled. Run the same command for another track. TRY LATER Unable to save thumb rating. Unable to save BookMark. Unable to add station. Try again later. MAINTENANCE Pandora system is undergoing maintenance. Try again later. SKIP LIMIT Due to music licensing restrictions, Pandora limits the total number of skips per hour. Wait until Pandora allows you to skip again. CHECK APP This version of the Pandora application is not supported. Connect a device that has a compatible version of the Pandora application installed. CHECK DEVICE Device error message displayed in the Pandora application. Check the connected device. NO STATION No station found. Create a station in the Pandora application on your connected device. SELECT STN No station selected. Select a station. NO BT DEVICE GO TO BT MENU TO REGISTER No Bluetooth device found. Connect the unit and the device via Bluetooth (page 9). CONN. FAILED PRESS BAND KEY TO RETRY Bluetooth connection failed. Press BAND/ to make a connection again. CHECK APP PRESS BAND KEY TO RETRY Connection to the Pandora application failed. Press BAND/ to make a connection again. DISCONNECTED PRESS BAND KEY TO RETRY Bluetooth connection lost. Press BAND/ to make a connection again. STATION FULL A new station cannot be added. Delete an old station to open a spot for a new one. CAN.T DELETE The station could not be deleted. Run the same command for another station. NO NETWORK The connected device is out of area. Connect the device to a network. NO SERVICE The connected device is out of area. Connect the device to a network. CAN.T PLAY The operation was disabled. Run the same command for another station. Apps NO BT DEVICE GO TO BT MENU TO REGISTER No Bluetooth device found. Connect the unit and the device via Bluetooth (page 9). CONN. FAILED PRESS BAND KEY TO RETRY Bluetooth connection failed. Press BAND/ to make a connection again. DISCONNECTED PRESS BAND KEY TO RETRY Bluetooth connection failed. Press BAND/ to make a connection again. CHECK APP Connection to the application failed. Follow the instructions that appear on the screen. START UP APP The application has not started running yet. Operate the mobile device to start up the application. Handling guidelines USB storage device Connections via USB hubs are not supported. Firmly secure the USB storage device before driving. Do not let the USB storage device fall onto the floor, where it may become jammed under the brake or accelerator pedal. Depending on the USB storage device, the following problems may occur. Operations may vary. The storage device may not be recognized. Files may not be played back properly. The device may cause audible interference when you are listening to the radio. ipod Do not leave the ipod in places with high temperatures. Firmly secure the ipod when driving. Do not let the ipod fall onto the floor, where it may become jammed under the brake or accelerator pedal. The settings of the ipod such as the equalizer and repeat play are changed automatically when the ipod is connected to the unit. Once the ipod is disconnected, those settings will return to the original settings. Incompatible text saved on the ipod will not be displayed by the unit. Compressed audio compatibility Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name. The unit may not work properly depending on the application used to encode WMA files. There may be a slight delay at the start of the playback of audio files embedded with image data, or audio files stored on a USB device with numerous folder hierarchies. CAUTION Pioneer cannot guarantee compatibility with all USB mass storage devices, and assumes no responsibility for any loss of data on media players, smartphones, or other devices while using this product. Do not leave discs or a USB storage device in any place that is subject to high temperatures. 20 En