DEH-P480MP. Operation Manual Mode demploi

Transcription

1 Operation Manual Mode demploi Multi-CD control High power CD/MP3/WMA player with FM/AM tuner Syntoniseur FM/AM et lecteur de CD/MP3/WMA, Puissance élevée, avec contrôleur pour lecteur de CD à chargeur DEH-P480MP English Français Español

2 Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference. Before You Start Information to User 4 For Canadian model 4 About this unit 4 About this manual 4 After-sales service for Pioneer products 5 Product registration 5 Features 5 About WMA 6 Use and care of the remote control 6 Installing the battery 6 Using the remote control 6 About the SAT RADIO READY mark 7 Protecting your unit from theft 7 Removing the front panel 7 Attaching the front panel 8 Whats What Head unit 9 Remote control 9 Power ON/OFF Turning the unit on 11 Selecting a source 11 Turning the unit off 11 Tuner Listening to the radio 12 Introduction of advanced tuner operation 13 Storing and recalling broadcast frequencies 13 Tuning in strong signals 13 Storing the strongest broadcast frequencies 14 Built-in CD Player Playing a CD 15 Introduction of advanced built-in CD player operation 16 Repeating play 16 Playing tracks in random order 16 Scanning tracks of a CD 16 Pausing CD playback 17 Using compression and BMX 17 Selecting the search method 17 Searching every 10 tracks in the current disc 18 Using disc title functions 18 Entering disc titles 18 Displaying disc titles 19 Using CD TEXT functions 19 Displaying text information on CD TEXT discs 19 Scrolling text information in the display 19 MP3/WMA/WAV Player Playing MP3/WMA/WAV 20 Introduction of advanced built-in CD player (MP3/WMA/WAV) operation 22 Repeating play 22 Playing tracks in random order 22 Scanning folders and tracks 23 Pausing MP3/WMA/WAV playback 23 Using compression and BMX 23 Selecting the search method 24 Searching every 10 tracks in the current folder 24 Displaying text information on MP3/WMA/ WAV disc 24 When playing back an MP3/WMA disc 24 When playing back a WAV disc 25 Scrolling text information in the display 25 2 En

3 Contents English Multi-CD Player Playing a CD disc multi-cd player 26 Introduction of advanced multi-cd player operation 27 Repeating play 27 Playing tracks in random order 27 Scanning CDs and tracks 28 Pausing CD playback 28 Using ITS playlists 28 Creating a playlist with ITS programming 28 Playback from your ITS playlist 29 Erasing a track from your ITS playlist 29 Erasing a CD from your ITS playlist 29 Using disc title functions 30 Entering disc titles 30 Displaying disc titles 30 Using CD TEXT functions 31 Displaying text information on CD TEXT discs 31 Scrolling text information in the display 31 Using compression and bass emphasis 31 Audio Adjustments Introduction of audio adjustments 32 Using balance adjustment 32 Using the equalizer 33 Recalling equalizer curves 33 Adjusting equalizer curves 33 Fine-adjusting equalizer curve 33 Adjusting loudness 34 Using subwoofer output 34 Adjusting subwoofer settings 34 Using the high pass filter 35 Boosting the bass 35 Front image enhancer (F.I.E.) 35 Adjusting source levels 36 InitialSettings Adjusting initial settings 37 Setting the clock 37 Switching the warning tone 37 Switching the auxiliary setting 37 Setting the rear output and subwoofer output 38 Other Functions Turning the clock display on or off 39 Using the AUX source 39 About AUX1 and AUX2 39 Selecting AUX as the source 39 Setting the AUX title 39 Introduction of XMoperation 40 XMoperation 40 Switching the XMdisplay 40 Swiching the XMchannel select setting 41 Introduction of SIRIUS operation 41 SIRIUS operation 41 Swiching the SIRIUS channel select setting 41 AdditionalInformation Understanding built-in CD player error messages 43 CD player and care 43 CD-R/CD-RW discs 44 MP3, WMA and WAV files 44 MP3 additional information 45 WMA additional information 45 WAV additional information 45 About folders and MP3/WMA/WAV files 46 Terms 47 Specifications 49 En 3

4 Section 01 Before You Start Information to User Alteration or modifications carried out without appropriate authorization may invalidate the users right to operate the equipment. For Canadian model This Class B digital apparatus complies with Canadian ICES-003. CAUTION! Do not allow this unit to come into contact with liquids. Electrical shock could result. Also, this unit damage, smoke, and overheat could result from contact with liquids.! Keep this manual handy as a reference for operating procedures and precautions.! Always keep the volume low enough so that you can hear sounds from outside the vehicle.! Protect this unit from moisture.! If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. Important (Serialnumber) About this unit The tuner frequencies on this unit are allocated for use in North America. Use in other areas may result in poor reception. The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. WARNING: Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling. CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULTIN HAZARDOUS RADIATION EXPOSURE. CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. About this manual This unit features a number of sophisticated functions ensuring superior reception and operation. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This operation manual will help you benefit fully from this units potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this unit. It is especially important that you read and observe WARNINGs and CAU- TIONs in this manual. 4 En

5 Before You Start Section 01 After-sales service for Pioneer products Please contact the dealer or distributor from where you purchased this unit for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below: Please do not ship your unit to the companies at the addresses listed below for repair without advance contact. U.S.A. Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA CANADA Pioneer Electronics of Canada, Inc. CUSTOMER SATISFACTION DEPARTMENT 300 Allstate Parkway Markham, Ontario L3R OP For warranty information please see the Limited Warranty sheet included with this unit. Product registration Visit us at the following site: 1 Register your product. We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft. 2 Receive updates on the latest products and technologies. 3 Download owners manuals, order product catalogues, research new products, and much more. Features CD playback Music CD/CD-R/CD-RW playback is possible. MP3 file playback You can play back MP3 files recorded on CD- ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2 standard recordings).! Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue-generating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit WMA file playback You can play back WMA files recorded on CD- ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2 standard recordings). WAV file playback You can play back WAV files recorded on CD- ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2 standard recordings). English En 5

6 Section 01 Before You Start About WMA The Windows Media" logo printed on the box indicates that this unit can play back WMA data. WMA is short for Windows Media" Audio and refers to an audio compression technology that is developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 7 or later. Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Notes! This unit may not operate correctly depending on the application used to encode WMA files.! Depending on the version of Windows Media Player used to encode WMA files, album names and other text information may not be correctly displayed.! There may be a slight delay when starting playback of WMA files encoded with image data. Use and care of the remote control Installing the battery Slide the tray out on the back of the remote control and insert the battery with the plus (+) and minus () poles pointing in the proper direction. WARNING Keep the battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. CAUTION! Use only one CR2025 (3 V) lithium battery.! Remove the battery if the remote control is not used for a month or longer.! Do not recharge, disassemble, heat or dispose of the battery in fire.! Do not handle the battery with metallic tools.! Do not store the battery with metallic materials.! In the event of battery leakage, wipe the remote control completely clean and install a new battery.! When disposing of used batteries, please comply with governmental regulations or environmental public institutions rules that apply in your country/area. Using the remote control Point the remote control in the direction of the front panel to operate. 6 En

7 Before You Start Section 01 Important! Do not store the remote control in high temperatures or direct sunlight.! The remote control may not function properly in direct sunlight.! Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal. Protecting your unit from theft The front panel can be detached from the head unit to discourage theft.! If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound.! You can turn off the warning tone. See Switching the warning tone on page 37. English About the SAT RADIO READY mark The SAT RADIO READY mark printed on the front panel indicates that the Satellite Radio Tuner for Pioneer (i.e., XMtuner and Sirius satellite tuner which are sold separately) can be controlled by this unit. Please inquire to your dealer or nearest authorized Pioneer service station regarding the satellite radio tuner that can be connected to this unit. For satellite radio tuner operation, please refer to the satellite radio tuner owners manual. Notes! The system will use direct satellite-to-receiver broadcasting technology to provide listeners in their cars and at home with crystal-clear sound seamlessly from coast to coast. Satellite radio will create and package over 100 channels of digital-quality music, news, sports, talk and childrens programming.! SAT Radio, the SAT Radio logo and all related marks are trademarks of Sirius Satellite Radio inc., and XMSatellite Radio Inc. Important! Never use force or grip the display and the buttons too tightly when removing or attaching.! Avoid subjecting the front panel to excessive shocks.! Keep the front panel out of direct sunlight and high temperatures. Removing the front panel 1 Press OPEN to open the front panel. 2 Grip the left side of the front panel and pull it gently outward. Take care not to grip it too tightly or to drop the front panel and protect it from contact with water or other fluids to prevent permanent damage. En 7

8 Section 01 Before You Start Attaching the front panel % Replace the front panel by holding it upright to the unit and clipping it securely into the mounting hooks. 8 En

9 Whats What Section 02 English Head unit 1 AUDIO button Press to select various sound quality controls. 2 FUNCTION button Press to select functions. 3 SW button Press to select the subwoofer setting menu. Press and hold to select the bass boost setting menu. 4 SOURCE button, VOLUME This unit is turned on by selecting a source. Press to cycle through all the available sources. Rotate it to increase or decrease the volume. 5 EQ button Press to select various equalizer curves. 6 OPEN button Press to open the front panel buttons Press for preset tuning and disc number search when using a multi-cd player. 8 BAND button Press to select among three FMbands and one AMband and to cancel the control mode of functions. 9 DISPLAY button Press to select different displays. a CLOCK button Press to change to the clock display. Press and hold to change the channel select mode when XMtuner or SIRIUS tuner is selected as the source. b a/b/c/d buttons Press to perform manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. Remote control Operation is the same as when using the buttons on the head unit. See the explanation of the head unit about the operation of each button with the exception of ATT and PAUSE, which is explained below. c VOLUME button Press to increase or decrease the volume. En 9

10 Section 02 Whats What c d 8 2 f 1 9 b e d SOURCE button This unit is turned on by selecting a source. Press to cycle through all the available sources. e PAUSE button Press to turn pause on or off. f ATT button Press to quickly lower the volume level, by about 90%. Press once more to return to the original volume level. 10 En

11 Power ON/OFF Section 03 Turning the unit on % Press SOURCE to turn the unit on. When you select a source, the unit is turned on. Turning the unit off % Press SOURCE and hold until the unit turns off. English Selecting a source You can select a source you want to listen to. To switch to the built-in CD player, load a disc in the unit (refer to page 15). % Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources: XM tunersirius tunertunertelevisionbuilt-in CD playermulti-cd player Externalunit 1Externalunit 2AUX1 AUX2 Notes! In the following cases, the sound source will not change: When there is no unit corresponding to the selected source connected to this unit. When there is no disc in the unit. When there is no magazine in the multi- CD player. When the AUX (auxiliary input) is set to off (refer to page 37).! External unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two external units are connected, the allocation of them to external unit 1 or external unit 2 is automatically set by this unit.! When this units blue/white lead is connected to the vehicles auto-antenna relay control terminal, the vehicles antenna extends when this units source is turned on. To retract the antenna, turn the source off. En 11

12 Section 04 Tuner Listening to the radio These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page. 1 Band indicator Shows which band the radio is tuned to, AM or FM. 2 Frequency indicator Shows the frequency to which the tuner is tuned. 4 To perform manual tuning, briefly press c or d. The frequencies move up or down step by step. 5 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. # You can cancel seek tuning by briefly pressing c or d. # If you press and hold c or d you can skip stations. Seek tuning starts as soon as you release the button. Note When the frequency selected is being broadcast in stereo the stereo (5) indicator will light. 3 Preset number indicator Shows which preset has been selected. 4 Stereo (5) indicator Shows when the selected frequency is being broadcast in stereo. 1 Press SOURCE to select the tuner. Press SOURCE until you see TUNER displayed. 2 Use VOLUME to adjust the sound level. Rotate it to increase or decrease the volume. 3 Press BAND to select a band. Press BAND until the desired band (F1, F2, F3 for FMor AM) is displayed. 12 En

13 Tuner Section 04 Introduction of advanced tuner operation Function display Shows the function status. 2 2 Preset number indicator Shows which preset has been selected. 3 LOC indicator Shows when local seek tuning is on. % Press FUNCTION to display the function names. Press FUNCTION repeatedly to switch between the following functions: BSM (best stations memory)local (local seek tuning) # To return to the frequency display, press BAND. Note If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display. Storing and recalling broadcast frequencies If you press any of the preset tuning buttons 16 you can easily store up to six broadcast frequencies for later recall with the touch of a button. % When you find a frequency that you want to store in memory, press one of preset tuning buttons 16 and hold until the preset number stops flashing. The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same preset tuning button the radio station frequency is recalled from memory. Notes! Up to 18 FMstations, six for each of the three FMbands, and six AMstations can be stored in memory.! You can also use a and b to recall radio station frequencies assigned to preset tuning buttons 16. Tuning in strong signals Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press FUNCTION to select LOCAL. Press FUNCTION until LOCAL appears in the display. 2 Press a to turn local seek tuning on. Local seek sensitivity (e.g., LOCAL 2) appears in the display. 3 Press c or d to set the sensitivity. There are four levels of sensitivity for FMand two levels for AM: FM: LOCAL 1LOCAL 2LOCAL 3 LOCAL 4 AM: LOCAL 1LOCAL 2 English En 13

14 Section 04 Tuner The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. 4 When you want to return to normal seek tuning, press b to turn local seek tuning off. LOCAL:OFF appears in the display. Storing the strongest broadcast frequencies BSM(best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 16. Once stored you can tune in to those frequencies with the touch of button. 1 Press FUNCTION to select BSM. Press FUNCTION until BSM appears in the display. 2 Press a to turn BSM on. BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies will be stored under preset tuning buttons 16 in the order of their signal strength. When finished, BSM stops flashing. # To cancel the storage process, press b. Note Storing broadcast frequencies with BSMmay replace broadcast frequencies you have saved using buttons En

15 Built-in CD Player Section 05 Playing a CD 1 2 # To avoid a malfunction, make sure that no metal object comes into contact with the terminals when the front panel is open. 3 Close the front panel. English 4 Use VOLUME to adjust the sound level. Rotate it to increase or decrease the volume. 3 These are the basic steps necessary to play a CD with your built-in CD player. More advanced CD operation is explained starting on the next page. 1 EQ indicator Shows which equalizer curve is selected. 2 Play time indicator Shows the elapsed playing time of the current track. 3 Track number indicator Shows the track currently playing. 1 Press OPEN to open the front panel. CD loading slot appears. # After a CD has been inserted, press SOURCE to select the built-in CD player. 2 Insert a CD into the CD loading slot. Playback will automatically start. CD loading slot 5 To perform fast forward or reverse, press and hold c or d. # If you select ROUGH, pressing and holding c or d enables you to search every 10 tracks in the current disc. (Refer to Selecting the search method on page 17.) 6 To skip back or forward to another track, press c or d. Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track. Notes! The built-in CD player plays one standard, 12- cm or 8-cm CD at a time. Do not use an adapter when playing 8-cm CDs.! Do not insert anything other than a CD into the CD loading slot.! If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting it again.! If an error message such as ERROR-11 is displayed, refer to Understanding built-in CD player error messages on page 43.! When a CD TEXT disc is inserted, the disc and track titles begin to scroll to the left automatically. EJECT button # You can eject a CD by pressing EJECT. En 15

16 Section 05 Built-in CD Player Introduction of advanced built-in CD player operation Function display Shows the function status. 2 RPT indicator Shows when repeat range is selected to current track. % Press FUNCTION to display the function names. Press FUNCTION repeatedly to switch between the following functions: RPT (repeat play)rdm (random play) SCAN (scan play)pause (pause)comp (compression and BMX)FF/REV (search method) # To return to the playback display, press BAND. 2 Press c or d to select the repeat range. This switches you to the selected setting.! DSC Repeat the current disc! TRK Repeat just the current track Note If you perform track search or fast forward/reverse during TRK, the repeat play range changes to DSC. Playing tracks in random order Random play lets you play back tracks on the CD in a random order. 1 Press FUNCTION to select RDM. Press FUNCTION until RDM appears in the display. 2 Press a to turn random play on. RDM :ON appears in the display. Tracks will play in a random order. 3 Press b to turn random play off. RDM :OFF appears in the display. Tracks will continue to play in order. Note If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. Repeating play Repeat play lets you hear the same track or disc over again. 1 Press FUNCTION to select RPT. Press FUNCTION until RPT appears in the display. Scanning tracks of a CD Scan play lets you hear the first 10 seconds of each track on the CD. 1 Press FUNCTION to select SCAN. Press FUNCTION until SCAN appears in the display. 2 Press a to turn scan play on. SCAN :ON appears in the display. The first 10 seconds of each track is played. 16 En

17 Built-in CD Player Section 05 3 When you find the desired track press b to turn scan play off. SCAN :OFF appears in the display. The track will continue to play. # If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION. Note After scanning of a CD is finished, normal playback of the tracks will begin again. enhances the playback of the track or CD that you are listening to. 1 Press FUNCTION to select COMP. Press FUNCTION until COMP appears in the display. 2 Press a or b to select your favorite setting. Press a or b repeatedly to switch between the following settings: COMP OFFCOMP 1COMP 2 COMP OFFBMX 1BMX 2 English Pausing CD playback Pause lets you temporarily stop playback of the CD. 1 Press FUNCTION to select PAUSE. Press FUNCTION until PAUSE appears in the display. 2 Press a to turn pause on. PAUSE:ON appears in the display. Play of the current track pauses. 3 Press b to turn pause off. PAUSE:OFF appears in the display. Play will resume at the same point that you turned pause on. Using compression and BMX Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this player. Each of the functions has a two-step adjustment. The COMP function balances the output of louder and softer sounds at higher volumes. BMX controls sound reverberations to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best Selecting the search method You can switch the search method between fast forward/reverse and searching every 10 tracks. 1 Press FUNCTION to select FF/REV. Press FUNCTION until FF/REV appears in the display. # If the search method ROUGH has been previously selected, ROUGH will be displayed. 2 Press c or d to select the search method. Press c or d until the desired search method appears in the display.! FF/REV Fast forward and reverse! ROUGH Searching every 10 tracks En 17

18 Section 05 Built-in CD Player Searching every 10 tracks in the current disc If a disc contains over 10 tracks, you can search every 10 tracks. When a disc contains many tracks, you can roughly search for the track you want to play. 1 Select the search method ROUGH. Refer to Selecting the search method on the previous page. 2 Press and hold c or d to search every 10 tracks on a disc. # If a disc contains less than 10 tracks, pressing and holding d recalls the last track of the disc. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pressing and holding d recalls the last track of the disc. # If a disc contains less than 10 tracks, pressing and holding c recalls the first track of the disc. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pressing and holding c recalls the first track of the disc. Using disc title functions You can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD will be displayed. Entering disc titles Use the disc title input feature to store up to 48 CD titles in the unit. Each title can be up to 8 characters long. 1 Play the CD that you want to enter a title for. 2 Press FUNCTION and hold until TITLE IN appears in the display. # When playing a CD TEXT disc, you cannot switch to TITLE IN. The disc title will have already been recorded on a CD TEXT disc. 3 Press a or b to select a letter of the alphabet. Each press of a will display a letter of the alphabet in A B C... X Y Z, numbers and symbols in > [ ] order. Each press of b will display a letter in the reverse order, such as Z Y X... C B A order. 4 Press d to move the cursor to the next character position. When the letter you want is displayed, press d to move the cursor to the next position and then select the next letter. Press c to move backwards in the display. 5 Move the cursor to the last position by pressing d after entering the title. When you press d one more time, the entered title is stored in memory. 6 Press BAND to return to the playback display. Notes! Titles remain in memory, even after the disc has been removed from the unit, and are recalled when the disc is reinserted.! After data for 48 discs has been stored in memory, data for a new disc will overwrite the oldest one.! If you connect a multi-cd player, you can input disc titles for up to 100 discs. 18 En

19 Built-in CD Player Section 05! When a multi-cd player that does not support disc title functions is connected, you cannot enter disc titles in this unit. Displaying disc titles You can display the text information of any disc that has had a disc title entered. % Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings: Play timedisc TITLE (disc title) When you select DISC TITLE, the title of the currently playing disc is shown in the display. # If no title has been entered for the currently playing disc, NO DISC TITLE is displayed. Scrolling text information in the display This unit can display the first 16 letters only of DISC TITLE, DISC ARTIST, TRACK TITLE and TRACK ARTIST. When the recorded information is longer than 16 letters, you can scroll the text to the left so that the rest of the title can be seen. % Press DISPLAY and hold until the title begins to scroll to the left. The rest of the title will appear in the display. English Using CD TEXT functions Some discs have certain information encoded on the disc during manufacture. These discs may contain such information as the CD title, track title, artists name and playback time and are called CD TEXT discs. Only these specially encoded CD TEXT discs support the functions listed below. Displaying text information on CD TEXT discs % Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings: Play timedisc TITLE (disc title) DISC ARTIST (disc artist name) TRACK TITLE (track title)track ARTIST (track artist name) # If specific information has not been recorded on a CD TEXT disc, NO XXXX will be displayed (e.g., NO TRACK TITLE). En 19

20 Section 06 MP3/WMA/WAV Player Playing MP3/WMA/WAV CD loading slot These are the basic steps necessary to play an MP3/WMA/WAV with your built-in CD player. More advanced MP3/WMA/WAV operation is explained starting on page EQ indicator Shows which equalizer curve is selected. 2 Folder number indicator Shows the number of folder currently playing. 3 Play time indicator Shows the elapsed playing time of the current track (file). 4 Track number indicator Shows the track (file) currently playing. 5 WMA indicator Shows when a WMA file is playing. 6 MP3 indicator Shows when an MP3 file is playing. 1 Press OPEN to open the front panel. CD loading slot appears. # After a CD-ROMhas been inserted, press SOURCE to select the built-in CD player. 2 Insert a CD-ROM into the CD loading slot. Playback will automatically start. EJECT button # You can eject a CD-ROMby pressing EJECT. # To avoid a malfunction, make sure that no metal object comes into contact with the terminals when the front panel is open. 3 Close the front panel. 4 Use VOLUME to adjust the sound level. Rotate it to increase or decrease the volume. 5 Press a or b to select a folder. # You cannot select a folder that does not have an MP3/WMA/WAV file recorded in it. # To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder To perform fast forward or reverse, press and hold c or d. # This is fast forward and reverse operation only for the file being played. # If you select ROUGH, pressing and holding c or d enables you to search every 10 tracks in the current folder. (Refer to Selecting the search method on page 24.) 7 To skip back or forward to another track, press c or d. Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track. 20 En

21 MP3/WMA/WAV Player Section 06 Notes! When playing discs with MP3/WMA/WAV files and audio data (CD-DA) such as CD-EXTRA and MIXED-MODE CDs, both types can be played only by switching mode between MP3/ WMA/WAV and CD-DA with BAND.! If you have switched between playback of MP3/WMA/WAV files and audio data (CD-DA), playback starts at the first track on the disc.! The built-in CD player can play back an MP3/ WMA/WAV file recorded on CD-ROM. (Refer to page 44 for files that can be played back.)! Do not insert anything other than a CD into the CD loading slot.! There is sometimes a delay between starting up CD playback and the sound being issued. When being read, FORMAT READ is displayed.! If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting it again.! Playback is carried out in order of file number. Folders are skipped if they contain no files. (If folder 01 (ROOT) contains no files, playback commences with folder 02.)! When playing back files recorded as VBR (variable bit rate) files, the play time will not be correctly displayed if fast forward or reverse operations are used.! If the inserted disc contains no files that can be played back, NO AUDIO is displayed.! If the inserted disc contains WMA files that are protected by digital rights management (DRM), SKIPPED is displayed while the protected file is skipped.! If all the files on the inserted disc are secured by DRM, PROTECT is displayed.! There is no sound on fast forward or reverse.! If an error message such as ERROR-11 is displayed, refer to Understanding built-in CD player error messages on page 43.! When an MP3/WMA/WAV disc is inserted, folder name and file name begin to scroll to the left automatically. English En 21

22 Section 06 MP3/WMA/WAV Player Introduction of advanced built-in CD player (MP3/ WMA/WAV) operation Function display Shows the function status. 2 RPT indicator Shows when repeat range is selected to current track (file). % Press FUNCTION to display the function names. Press FUNCTION repeatedly to switch between the following functions: RPT (repeat play)rdm (random play) SCAN (scan play)pause (pause)comp (compression and BMX)FF/REV (search method) # To return to the playback display, press BAND. Note If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. Repeating play For MP3/WMA/WAV playback, there are three repeat play ranges: FLD (folder repeat), TRK (one-track repeat) and DSC (repeat all tracks). 1 Press FUNCTION to select RPT. Press FUNCTION until RPT appears in the display. 2 Press c or d to select the repeat range. Press c or d until the desired repeat range appears in the display.! FLD Repeat the current folder! TRK Repeat just the current track! DSC Repeat all tracks Notes! If you select another folder during repeat play, the repeat play range changes to DSC.! If you perform track search or fast forward/reverse during TRK, the repeat play range changes to FLD.! When FLD is selected, it is not possible to play back a subfolder of that folder.! When you select FLD for the repeating range and return to the playback display, FRPT is displayed. Playing tracks in random order Random play lets you play back tracks in a random order within the repeat range, FLD and DSC. 1 Select the repeat range. Refer to Repeating play on this page. 2 Press FUNCTION to select RDM. Press FUNCTION until RDM appears in the display. 3 Press a to turn random play on. RDM :ON appears in the display. Tracks will play in a random order within the previously selected FLD or DSC ranges. 22 En

23 MP3/WMA/WAV Player Section 06 4 Press b to turn random play off. RDM :OFF appears in the display. Tracks will continue to play in order.! If you turn scan play on during FLD and then return to the playback display, FSCN appears in the display. English Note If you turn random play on during FLD and then return to the playback display, FRDM appears in the display. Pausing MP3/WMA/WAV playback Pause lets you temporarily stop playback of the MP3/WMA/WAV. Scanning folders and tracks While you are using FLD, the beginning of each track in the selected folder plays for about 10 seconds. When you are using DSC, the beginning of the first track of each folder is played for about 10 seconds. 1 Select the repeat range. Refer to Repeating play on page Press FUNCTION to select SCAN. Press FUNCTION until SCAN appears in the display. 3 Press a to turn scan play on. SCAN :ON appears in the display. The first 10 seconds of each track of the current folder (or the first track of each folder) is played. 4 When you find the desired track (or folder) press b to turn scan play off. SCAN :OFF appears in the display. The track (or disc) will continue to play. # If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION. Notes! After track or folder scanning is finished, normal playback of the tracks will begin again. 1 Press FUNCTION to select PAUSE. Press FUNCTION until PAUSE appears in the display. 2 Press a to turn pause on. PAUSE:ON appears in the display. Play of the current track pauses. 3 Press b to turn pause off. PAUSE:OFF appears in the display. Play will resume at the same point that you turned pause on. Using compression and BMX Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this player. Each of the functions has a two-step adjustment. The COMP function balances the output of louder and softer sounds at higher volumes. BMX controls sound reverberations to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best enhances the playback of the track or CD that you are listening to. 1 Press FUNCTION to select COMP. Press FUNCTION until COMP appears in the display. En 23

24 Section 06 MP3/WMA/WAV Player 2 Press a or b to select your favorite setting. Press a or b repeatedly to switch between the following settings: COMP OFFCOMP 1COMP 2 COMP OFFBMX 1BMX 2 Selecting the search method You can switch the search method between fast forward/reverse and searching every 10 tracks. 1 Press FUNCTION to select FF/REV. Press FUNCTION until FF/REV appears in the display. # If the search method ROUGH has been previously selected, ROUGH will be displayed. 2 Press c or d to select the search method. Press c or d until the desired search method appears in the display.! FF/REV Fast forward and reverse! ROUGH Searching every 10 tracks Searching every 10 tracks in the current folder If the current folder contains over 10 tracks, you can search every 10 tracks. When one folder contains a lot of tracks, you can roughly search for the track you want to play. 1 Select the search method ROUGH. Refer to Selecting the search method on this page. 2 Press and hold c or d to search every 10 tracks in the current folder. # If the current folder contains less than 10 tracks, pressing and holding d recalls the last track of the folder. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pressing and holding d recalls the last track of the folder. # If the current folder contains less than 10 tracks, pressing and holding c recalls the first track of the folder. Also, if the remaining number of tracks after searching every 10 tracks is less than 10, pressing and holding c recalls the first track of the folder. Displaying text information on MP3/WMA/WAV disc Text information recorded on an MP3/WMA/ WAV disc can be displayed. When playing backan MP3/ WMA disc % Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings: Play timefolder (folder name)file (file name)track TITLE (track title)artist (artist name)album (album title) COMMENT (comment)bit rate # When playing back MP3 files recorded as VBR (variable bit rate) files, the bit rate value is not displayed even after switching to bit rate. # When playing back WMA files recorded as VBR (variable bit rate) files, the average bit rate value is displayed. # If specific information has not been recorded on an MP3/WMA disc, NO XXXX will be displayed (e.g., NO NAME). 24 En

25 MP3/WMA/WAV Player Section 06 # Depending on the version of itunes used to write MP3 files onto a disc, comment information may not be correctly displayed. # itunes is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. # Depending on the version of Windows Media Player used to encode WMA files, album names and other text information may not be correctly displayed. Note Unlike MP3 and WMA file format, WAV files display only FOLDER and FILE. English When playing backa WAV disc % Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings: Play timefolder (folder name)file (file name)sampling frequency # If specific information has not been recorded on a WAV disc, NO XXXX will be displayed (e.g., NO NAME). # You can only play back WAV files in the frequencies 16, 22.05, 24, 32, 44.1 and 48 khz (LPCM), or and 44.1 khz (MS ADPCM). The sampling frequency shown in the display may be rounded. Scrolling text information in the display This unit can display the first 16 letters only of FOLDER, FILE, TRACK TITLE, ARTIST, ALBUM and COMMENT. When the recorded information is longer than 16 letters, you can scroll the text to the left so that the rest of the text information can be seen. % Press DISPLAY and hold until the text information begins to scroll to the left. The rest of the text information will appear in the display. En 25

26 Section 07 Multi-CD Player Playing a CD For discs 7 to 12, press and hold the corresponding numbers, such as 1 for disc 7, until the disc number appears in the display. # You can also sequentially select a disc by pressing a/b. 4 You can use this unit to control a multi-cd player, which is sold separately. These are the basic steps necessary to play a CD with your multi-cd player. More advanced CD operation is explained starting on the next page. 1 EQ indicator Shows which equalizer curve is selected. 2 Disc number indicator Shows the disc currently playing. 3 Play time indicator Shows the elapsed playing time of the current track. 4 Track number indicator Shows the track currently playing. 1 Press SOURCE to select the multi-cd player. Press SOURCE until you see MULTI CD displayed. 2 Use VOLUME to adjust the sound level. Rotate it to increase or decrease the volume. 4 To perform fast forward or reverse, press and hold c or d. 5 To skip back or forward to another track, press c or d. Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track. Notes! When the multi-cd player performs the preparatory operations, READY is displayed.! If an error message such as ERROR-11 is displayed, refer to the multi-cd player owners manual.! If there are no discs in the multi-cd player magazine, NO DISC is displayed.! When you select a CD TEXT disc on a CD TEXT compatible multi-cd player, the disc and track titles begin to scroll to the left automatically. 50-disc multi-cd player Only those functions described in this manual are supported by 50-disc multi-cd players. 3 Select a disc you want to listen to with the 16 buttons. For discs 1 to 6, press the corresponding button number. 26 En

27 Multi-CD Player Section 07 Introduction of advanced multi-cd player operation 1 2 Press c or d to select the repeat range. Press c or d until the desired repeat range appears in the display.! MCD Repeat all discs in the multi-cd player magazine! TRK Repeat just the current track! DSC Repeat the current disc English 2 1 Function display Shows the function status. 2 RPT indicator Shows when repeat range is selected to current track. % Press FUNCTION to display the function names. Press FUNCTION repeatedly to switch between the following functions: RPT (repeat play)rdm (random play) SCAN (scan play)its-p (ITS play)pause (pause)comp (compression and DBE) # To return to the playback display, press BAND. Note If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. Repeating play There are three repeat play ranges for the multi-cd player: MCD (multi-cd player repeat), TRK (one-track repeat) and DSC (disc repeat). 1 Press FUNCTION to select RPT. Press FUNCTION until RPT appears in the display. Notes! If you select other discs during repeat play, the repeat play range changes to MCD.! If you perform track search or fast forward/reverse during TRK, the repeat play range changes to DSC.! When you select DSC for the repeating range and return to the playback display, DRPT is displayed. Playing tracks in random order Random play lets you play back tracks in random order within the repeat range, MCD and DSC. 1 Select the repeat range. Refer to Repeating play on this page. 2 Press FUNCTION to select RDM. Press FUNCTION until RDM appears in the display. 3 Press a to turn random play on. RDM :ON appears in the display. Tracks will play in a random order within the previously selected MCD or DSC ranges. 4 Press b to turn random play off. RDM :OFF appears in the display. Tracks will continue to play in order. En 27

28 Section 07 Multi-CD Player Note If you turn random play on during DSC and then return to the playback display, DRDM appears in the display. Scanning CDs and tracks While you are using DSC, the beginning of each track on the selected disc plays for about 10 seconds. When you are using MCD, the beginning of the first track of each disc is played for about 10 seconds. 1 Select the repeat range. Refer to Repeating play on the previous page. 2 Press FUNCTION to select SCAN. Press FUNCTION until SCAN appears in the display. 3 Press a to turn scan play on. SCAN :ON appears in the display. The first 10 seconds of each track of the current disc (or the first track of each disc) is played. 4 When you find the desired track (or disc) press b to turn scan play off. SCAN :OFF appears in the display. The track (or disc) will continue to play. # If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION. Notes! After track or disc scanning is finished, normal playback of the tracks will begin again.! If you turn scan play on during DSC and then return to the playback display, DSCN appears in the display. Pausing CD playback Pause lets you temporarily stop playback of the CD. 1 Press FUNCTION to select PAUSE. Press FUNCTION until PAUSE appears in the display. 2 Press a to turn pause on. PAUSE:ON appears in the display. Play of the current track pauses. 3 Press b to turn pause off. PAUSE:OFF appears in the display. Play will resume at the same point that you turned pause on. Using ITS playlists ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-cd player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selections. Creating a playlist with ITS programming You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs (with the disc titles). (With multi-cd players sold before the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.) 1 Play a CD that you want to program. Press a or b to select the CD. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION repeatedly, the following functions appear in the display: 28 En

29 Multi-CD Player Section 07 TITLE IN (disc title input)its (ITS programming) 3 Select the desired track by pressing c or d. 4 Press a to store the currently playing track in the playlist. ITS IN is displayed briefly and the currently playing selection is added to your playlist. The display then shows ITS again. 5 Press BAND to return to the playback display. Note After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one. Playbackfrom your ITS playlist ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play, tracks from your ITS playlist in the multi-cd player will begin to play. 1 Select the repeat range. Refer to Repeating play on page Press FUNCTION to select ITS-P. Press FUNCTION until ITS-P appears in the display. 3 Press a to turn ITS play on. ITS-P:ON appears in the display. Playback begins of those tracks from your playlist within the previously selected MCD or DSC ranges. # If no tracks in the current range are programmed for ITS play, then EMPTY is displayed. 4 Press b to turn ITS play off. ITS-P:OFF appears in the display. Playback will continue in normal order from the currently playing track and CD. Erasing a trackfrom your ITS playlist You can delete a track from your ITS playlist if ITS play is on. If ITS play is already on, skip to step 2. If ITS play is not already on, press FUNCTION. 1 Play the CD with the track you want to delete from your ITS playlist, and turn ITS play on. Refer to Playback from your ITS playlist on this page. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION until ITS appears in the display. 3 Select the desired track by pressing c or d. 4 Press b to erase the track from your ITS playlist. The currently playing selection is erased from your ITS playlist and playback of the next track from your ITS playlist begins. # If there are no tracks from your playlist in the current range, EMPTY is displayed and normal play resumes. 5 Press BAND to return to the playback display. Erasing a CD from your ITS playlist You can delete all tracks of a CD from your ITS playlist if ITS play is off. 1 Play the CD that you want to delete. Press a or b to select the CD. English En 29

30 Section 07 Multi-CD Player 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION until ITS appears in the display. 3 Press b to erase all tracks on the currently playing CD from your ITS playlist. All tracks on the currently playing CD are erased from your playlist and ITS CLR is displayed. 4 Press BAND to return to the playback display. Using disc title functions You can input CD titles and display the titles. Then you can easily search for and play a desired disc. Entering disc titles Use the disc title input feature to store up to 100 CD titles (with ITS playlist) into the multi- CD player. Each title can be up to 8 characters long. 1 Play the CD that you want to enter a title for. Press a or b to select the CD. 2 Press FUNCTION and hold until TITLE IN appears in the display. After TITLE IN is displayed, press FUNCTION repeatedly, the following functions appear in the display: TITLE IN (disc title input)its (ITS programming) # When playing a CD TEXT disc on a CD TEXT compatible multi-cd player, you cannot switch to TITLE IN. The disc title has already been recorded on a CD TEXT disc. 3 Press a or b to select a letter of the alphabet. Each press of a will display a letter of the alphabet in A B C... X Y Z, numbers and symbols in > [ ] order. Each press of b will display a letter in the reverse order, such as Z Y X... C B A order. 4 Press d to move the cursor to the next character position. When the letter you want is displayed, press d to move the cursor to the next position and then select the next letter. Press c to move backwards in the display. 5 Move the cursor to the last position by pressing d after entering the title. When you press d one more time, the entered title is stored in memory. 6 Press BAND to return to the playback display. Notes! Titles remain in memory, even after the disc has been removed from the magazine, and are recalled when the disc is reinserted.! After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one. Displaying disc titles You can display the text information of any disc that has had a disc title entered. % Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings: Play timedisc TITLE (disc title) 30 En