Sélectionnez Boot Arch Linux et appuyez sur la touche Entrée ou patientez 300 secondes... Tapez loqdkeys fr et appuyez sur la touche Entrée
Tapez /arch/setup et appuyez sur la touche Entrée Appuyez sur la touche Entrée
Appuyez sur la touche 1 puis sur la touche Entrée Sélectionnez core-remote, extra-remote, community-remote, multilib-remote à l aide de la touche Espace (utilisez les flèches directionnelles pour vous déplacer) et appuyez sur la touche Entrée
Appuyez sur la touche Entrée Sélectionnez http://mir.archlinux.fr et appuyez sur la touche Entrée
Sélectionnez Yes et appuyez sur la touche Entrée Appuyez sur la touche Entrée
Sélectionnez l interface réseau eth0 (assurez-vous que la câble réseau soit connecté) et appuyez sur la touche Entrée Sélectionnez Yes et appuyez sur la touche Entrée
Appuyez sur la touche Entrée Appuyez sur la touche 2 puis sur la touche Entrée
Sélectionnez nano et appuyez sur la touche Entrée Appuyez sur la touche 3 puis sur la touche Entrée
Appuyez sur la touche 1 puis sur la touche Entrée Tapez e et appuyez sur la touche Entrée
Tapez p et appuyez sur la touche Entrée Appuyez sur la touche 2 puis sur la touche Entrée
Sélectionnez localtime et appuyez sur la touche Entrée Sélectionnez manual et appuyez sur la touche Entrée
Configurez le mois, l année, la date et appuyez sur la touche Entrée Configurez l heure et appuyez sur la touche Entrée
Sélectionnez return et appuyez sur la touche Entrée Sélectionnez Return to Main Menu et appuyez sur la touche Entrée
Appuyez sur la touche 4 puis sur la touche Entrée Appuyez sur la touche 2 puis sur la touche Entrée
Sélectionnez le disque dur (/dev/sda ici en l occurence) sur lequel ArchLinux sera installé et appuyez sur la touche Entrée Appuyez sur la touché Entrée
Sélectionner Free Space puis New pour créer une nouvelle partition et appuyez sur la touche Entrée Sélectionnez Primary et appuyez sur la touche Entrée
Pour avoir ArchLinux dans une seule partition laissez la taille affichée (Size in MB : 32212.25) et appuyez sur la touche Entrée Sélectionnez Write et appuyez sur la touche Entrée
Tapez yes et appuyez sur la touche Entrée Sélectionnez Quit et appuyez sur la touche Entrée
Sélectionnez DONE et appuyez sur la touche Entrée Appuyez sur la touche 3 puis sur la touche Entrée
Sélectionnez uuid et appuyez sur la touche Entrée Sélectionnez /dev/sda1 et appuyez sur la touche Entrée
Sélectionnez Yes et appuyez sur la touche Entrée Sélectionnez ext4 et appuyez sur la touche Entrée
Sélectionnez / et appuyez sur la touche Entrée Sélectionnez Ok et appuyez sur la touche Entrée
Sélectionnez Ok et appuyez sur la touche Entrée Sélectionnez DONE et appuyez sur la touche Entrée
Sélectionnez ignore et appuyez sur la touche Entrée Appuyez sur la touche Entrée
Appuyez sur la touche 5 puis sur la touche Entrée Appuyez sur la touche 5 puis sur la touche Entrée
Appuyez sur la touche Entrée Sélectionnez syslinux et appuyez sur la touche Entrée
Sélectionnez base, base-devel et appuyez sur la touche Entrée Sélectionnez Ok et appuyez sur la touche Entrée
Appuyez sur la touche 6 puis sur la touche Entrée Appuyez sur la touche Entrée
Sélectionnez Continue et appuyez sur la touche Entrée Appuyez sur la touche 7 puis sur la touche Entrée
Sélectionnez /etc/rc.conf et appuyez sur la touche Entrée
[CONTENU DU FICHIER /etc/rc.conf] HARDWARECLOCK="localtime" TIMEZONE="Europe/Paris" KEYMAP="fr-pc" CONSOLEFONT="lat9w-16" CONSOLEMAP="" LOCALE="fr_FR.UTF-8" DAEMON_LOCALE="yes" USECOLOR="yes" MODULES=() USEDMRAID="no" USEBTRFS="no" USELVM="no" HOSTNAME="ArchLinux" interface=eth0 address= netmask= broadcast= gateway= NETWORK_PERSIST="no" DAEMONS=(syslog-ng network crond) Modifiez votre fichier /etc/rc.conf afin d obtenir un contenu identique à cet exemple
Appuyez sur les touches Ctrl+x puis sur la touche y Appuyez sur la touche Entrée
Sélectionnez /etc/fstab et appuyez sur la touche Entrée [CONTENU DU FICHIER /etc/fstab] tmpfs /tmp tmpfs nodev,nosuid 0 0 UUID=9296d720-3f51-4353-b47e-3c79a5df38b0 / ext4 defaults 0 1 Modifiez votre fichier /etc/fstab afin d obtenir un contenu similaire à cet exemple, (votre ligne UUID=9296d720-3f51-4353-b47e-3c79a5df38b0 ne possède pas la même valeur, surtout ne la changez pas)
Appuyez sur les touches Ctrl+x puis sur la touche y Appuyez sur la touche Entrée
Sélectionnez /etc/mkinitcpio.conf et appuyez sur la touche Entrée
MODULES="" BINARIES="" FILES="" [CONTENU DU FICHIER /etc/mkinitcpio.conf] HOOKS="base udev autodetect pata scsi sata filesystems usbinput" #COMPRESSION="gzip" #COMPRESSION="bzip2" #COMPRESSION="lzma" #COMPRESSION="xz" #COMPRESSION="lzop" #COMPRESSION_OPTIONS="" Modifiez votre fichier /etc/mkinitcpio.conf afin d obtenir un contenu identique à cet exemple Appuyez sur les touches Ctrl+x puis sur la touche y
Appuyez sur la touche Entrée Sélectionnez /etc/modprobe.d/modprobe.conf et appuyez sur la touche Entrée
[CONTENU DU FICHIER /etc/mkinitcpio.conf] Supprimez le contenu de ce fichier Appuyez sur les touches Ctrl+x puis sur la touche y
Appuyez sur la touche Entrée Sélectionnez /etc/resolv.conf et appuyez sur la touche Entrée
[CONTENU DU FICHIER /etc/resolv.conf] #nameserver Modifiez votre fichier /etc/mkinitcpio.conf afin d obtenir un contenu identique à cet exemple
Appuyez sur les touches Ctrl+x puis sur la touche y Appuyez sur la touche Entrée
Sélectionnez /etc/hosts et appuyez sur la touche Entrée
[CONTENU DU FICHIER /etc/hosts] 127.0.0.1 localhost.localdomain localhost ArchLinux ::1 localhost.localdomain localhost Modifiez votre fichier /etc/hosts afin d obtenir un contenu identique à cet exemple Appuyez sur les touches Ctrl+x puis sur la touche y
Appuyez sur la touche Entrée Sélectionnez /etc/locale.gen et appuyez sur la touche Entrée
[CONTENU DU FICHIER /etc/locale.gen] fr_fr.utf-8 UTF-8 fr_fr ISO-8859-1 fr_fr@euro ISO-8859-15 Modifiez votre fichier /etc/locale.gen afin d obtenir un contenu identique à cet exemple
Appuyez sur les touches Ctrl+x puis sur la touche y Appuyez sur la touche Entrée
Sélectionnez /etc/pacman.conf et appuyez sur la touche Entrée
[CONTENU DU FICHIER /etc/pacman.conf] [options] #RootDir = / #DBPath = /var/lib/pacman/ #CacheDir = /var/cache/pacman/pkg/ #LogFile = /var/log/pacman.log #GPGDir = /etc/pacman.d/gnupg HoldPkg = pacman glibc SyncFirst = pacman linux-headers #XferCommand = /usr/bin/curl -C - -f %u > %o #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u #CleanMethod = KeepInstalled Architecture = auto #IgnorePkg = #IgnoreGroup = #NoUpgrade = #NoExtract = UseSyslog UseDelta TotalDownload CheckSpace VerbosePkgLists #SigLevel = Optional TrustedOnly #SigLevel = Optional TrustAll SigLevel = Never #[testing] #Include = /etc/pacman.d/mirrorlist [core] Include = /etc/pacman.d/mirrorlist [extra] Include = /etc/pacman.d/mirrorlist #[community-testing] #Include = /etc/pacman.d/mirrorlist [community] Include = /etc/pacman.d/mirrorlist #[multilib-testing] #Include = /etc/pacman.d/mirrorlist [multilib] Include = /etc/pacman.d/mirrorlist [archlinuxfr] Server = http://repo.archlinux.fr/$arch Modifiez votre fichier /etc/pacman.conf afin d obtenir un contenu identique à cet exemple
Appuyez sur les touches Ctrl+x puis sur la touche y Appuyez sur la touche Entrée
Sélectionnez /etc/pacman.d/mirrorlist et appuyez sur la touche Entrée
[CONTENU DU FICHIER /etc/pacman.d/mirrorlist] Server = http://mir.archlinux.fr/$repo/os/$arch Server = ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/$arch Server = http://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/$arch Server = ftp://mir1.archlinux.fr/archlinux/$repo/os/$arch Server = http://mir1.archlinux.fr/archlinux/$repo/os/$arch Server = http://miroir.ezvan.fr/archlinux/$repo/os/$arch Server = ftp://archlinux.mirrors.ovh.net/archlinux/$repo/os/$arch Server = http://archlinux.mirrors.ovh.net/archlinux/$repo/os/$arch Server = http://archlinux.polymorf.fr/$repo/os/$arch Modifiez votre fichier /etc/pacman.d/mirrorlist afin d obtenir un contenu identique à cet exemple Appuyez sur les touches Ctrl+x puis sur la touche y
Appuyez sur la touche Entrée Sélectionnez /etc/root-password et appuyez sur la touche Entrée
Tapez votre_mot_de_passe_root et appuyez sur la touche Entrée Retapez votre_mot_de_passe_root et appuyez sur la touche Entrée
Sélectionnez Done et appuyez sur la touche Entrée Appuyez sur la touche 8 puis sur la touche Entrée
Appuyez sur la touche Entrée
[CONTENU DU FICHIER /boot/syslinux/syslinux.cfg] DEFAULT arch PROMPT 1 TIMEOUT 300 #KBDMAP de.ktl UI menu.c32 #UI vesamenu.c32 MENU TITLE Arch Linux #MENU BACKGROUND splash.png MENU COLOR border 30;44 #40ffffff #a0000000 std MENU COLOR title 1;36;44 #9033ccff #a0000000 std MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all MENU COLOR unsel 37;44 #50ffffff #a0000000 std MENU COLOR help 37;40 #c0ffffff #a0000000 std MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std MENU COLOR msg07 37;40 #90ffffff #a0000000 std MENU COLOR tabmsg 31;40 #30ffffff #00000000 std # (0) Arch Linux LABEL arch MENU LABEL ArchLinux LINUX../vmlinuz-linux APPEND root=/dev/sda1 ro INITRD../initramfs-linux.img # (1) Arch Linux Fallback LABEL archfallback MENU LABEL ArchLinux Fallback LINUX../vmlinuz-linux APPEND root=/dev/sda1 ro INITRD../initramfs-linux-fallback.img LABEL hdt MENU LABEL HDT (Hardware Detection Tool) COM32 hdt.c32 LABEL reboot MENU LABEL Reboot COM32 reboot.c32 LABEL off MENU LABEL Power Off COMBOOT poweroff.com Modifiez votre fichier /boot/syslinux/syslinux.cfg afin d obtenir un contenu identique à cet exemple
Appuyez sur les touches Ctrl+x puis sur la touche y Appuyez sur la touche Entrée
Sélectionnez Yes et appuyez sur la touche Entrée Appuyez sur la touche Entrée
Appuyez sur la touche 9 puis sur la touche Entrée Appuyez sur la touche Entrée
Tapez reboot et appuyez sur la touche Entrée Appuyez sur la touche Entrée ou patientez 30 secondes
Tapez root et appuyez sur la touche Entrée Tapez votre_mot_de_passe_root que vous avez choisi pendant l installation et appuyez sur la touche Entrée
Vous pouvez dès à présent travailler sur votre nouveau système d exploitation ArchLinux