GUIDE 115 IEC GUIDE 115 Edition 1.0 2007-09 GUIDE 115 Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector Application de l incertitude de mesure aux activités d évaluation de la conformité dans le secteur électrotechnique INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE PRICE CODE CODE PRIX T ICS 17.020; 19.080 ISBN 2-8318-9307-0
2 Guide 115 IEC:2007 CONTENTS FOREWORD... 03 INTRODUCTION... 5H1H4 1 Scope... 6H2H5 2 Reference documents... 7H3H5 3 Terms and definitions... 8H4H5 4 Application of uncertainty of measurement principles... 9H5H6 4.1 General... 10H6H6 4.2 Uncertainty of measurement principles... 11H7H7 4.3 Background... 12H8H7 4.4 Uncertainty of measurement principles Application of procedures... 13H9H8 4.5 Conclusion... 14H10H10 5 Guidance on making uncertainty of measurement calculations including examples of how to perform the calculations... 15H11H10 5.1 General principles... 16H12H10 5.2 Summary of steps when estimating uncertainty... 17H13H11 5.3 Simple example Estimation of measurement uncertainty for a temperaturerise test with thermocouples... 18H14H14 Annex A (informative) Uncertainty of measurement calculations for product conformity assessment testing Examples 1 to 6... 19H15H16
Guide 115 IEC:2007 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION APPLICATION OF UNCERTAINTY OF MEASUREMENT TO CONFORMITY ASSESSMENT ACTIVITIES IN THE ELECTROTECHNICAL SECTOR FOREWORD This first edition of IEC Guide 115 has been prepared in accordance with Annex A of Part 1 of the ISO/IEC Directives by the IECEE/CTL. The text of this guide is based on the following documents: Approval document C/1446/DV Report on voting C/1457/RV Full information on the voting for the approval of this Guide can be found in the report on voting indicated in the above table.
4 Guide 115 IEC:2007 INTRODUCTION This Guide has been prepared by the IECEE Committee of Testing Laboratories (CTL) to provide guidance on the practical application of the measurement uncertainty requirements of ISO/IEC 17025 to the electrical safety testing conducted within the IECEE CB Scheme. The IECEE CB Scheme is a multilateral, international agreement, among over 40 countries and some 60 national certification bodies, for the acceptance of test reports on electrical products tested to IEC standards. The aim of the CTL is, among other tasks, to define a common understanding of the test methodology with regard to the IEC standards as well as to ensure and continually improve the repeatability and reproducibility of test results among the member laboratories. The practical approach to measurement uncertainty outlined in this Guide has been adopted for use in the IECEE Schemes, and is also extensively used around the world by testing laboratories engaged in testing electrical products to national safety standards. This guide is of particular interest to the following IEC Technical Committees which may decide to make use of it if necessary: TECHNICAL COMMITTEE 13: EQUIPMENT FOR ELECTRICAL ENERGY MEASUREMENT, TARIFF AND LOAD CONTROL TECHNICAL COMMITTEE 17: SWITCHGEAR AND CONTROLGEAR TECHNICAL COMMITTEE 18: ELECTRICAL INSTALLATIONS OF SHIPS AND OF MOBILE AND FIXED OFFSHORE UNITS TECHNICAL COMMITTEE 20: ELECTRIC CABLES TECHNICAL COMMITTEE 21: SECONDARY CELLS AND BATTERIES TECHNICAL COMMITTEE 22: POWER ELECTRONIC SYSTEMS AND EQUIPMENT TECHNICAL COMMITTEE 23: ELECTRICAL ACCESSORIES TECHNICAL COMMITTEE 32: FUSES TECHNICAL COMMITTEE 33: POWER CAPACITORS TECHNICAL COMMITTEE 34: LAMPS AND RELATED EQUIPMENT TECHNICAL COMMITTEE 35: PRIMARY CELLS AND BATTERIES TECHNICAL COMMITTEE 38: INSTRUMENT TRANSFORMERS TECHNICAL COMMITTEE 39: ELECTRONIC TUBES TECHNICAL COMMITTEE 40: CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT TECHNICAL COMMITTEE 47: SEMICONDUCTOR DEVICES TECHNICAL COMMITTEE 59: PERFORMANCE OF HOUSEHOLD ELECTRICAL APPLIANCES TECHNICAL COMMITTEE 61: SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES TECHNICAL COMMITTEE 62: ELECTRICAL EQUIPMENT IN MEDICAL PRACTICE TECHNICAL COMMITTEE 64: ELECTRICAL INSTALLATIONS AND PROTECTION AGAINST ELECTRIC SHOCK TECHNICAL COMMITTEE 65: INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL TECHNICAL COMMITTEE 66: SAFETY OF MEASURING, CONTROL AND LABORATORY EQUIPMENT TECHNICAL COMMITTEE 76: OPTICAL RADIATION SAFETY AND LASER EQUIPMENT TECHNICAL COMMITTEE 77: ELECTROMAGNETIC COMPATIBILITY TECHNICAL COMMITTEE 78: LIVE WORKING TECHNICAL COMMITTEE 80: MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS TECHNICAL COMMITTEE 82: SOLAR PHOTOVOLTAIC ENERGY SYSTEMS
Guide 115 IEC:2007 5 APPLICATION OF UNCERTAINTY OF MEASUREMENT TO CONFORMITY ASSESSMENT ACTIVITIES IN THE ELECTROTECHNICAL SECTOR 1 Scope This Guide presents a practical approach to the application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector. It is specifically conceived for use in IECEE Schemes as well as by testing laboratories engaged in testing electrical products to national safety standards. Clause 4 describes the application of uncertainty of measurements principles. Clause 5 provides guidance on making uncertainty of measurement calculations. Annex A gives some examples relating to uncertainty of measurement calculations for product conformity assessment testing. 2 Reference documents ISO/IEC 17025: General requirements for the competence of testing and calibration laboratories Guide to the expression of uncertainty in measurement (GUM) (1995) [BIPM, IEC, IFCC, ISO, IUPAC, IUPAP, OIML] International vocabulary of basic and general terms in metrology (VIM) (1996) [BIPM, IEC, IFCC, ISO, IUPAC, IUPAP, OIML]
26 Guide 115 CEI:2007 SOMMAIRE AVANT-PROPOS... 0H27 INTRODUCTION... 1H28 1 Domaine d application... 2H29 2 Documents de référence... 3H29 3 Termes et définitions... 4H29 4 Application des principes de l incertitude de mesure... 5H30 4.1 Généralités... 6H30 4.2 Principes de l incertitude de mesure... 7H31 4.3 Contexte... 8H31 4.4 Principes de l incertitude de mesure Application des procédures... 9H32 4.5 Conclusion... 10H34 5 Lignes directrices pour la réalisation des calculs de l incertitude de mesure avec des exemples de calculs... 11H34 5.1 Principes généraux... 12H34 5.2 Résumé des étapes pour l estimation d une incertitude... 13H35 5.3 Exemple simple Estimation de l incertitude de mesure pour un essai d échauffement avec des thermocouples... 14H38 Annexe A (informative) Calculs de l incertitude de mesure pour les essais d évaluation de la conformité des produits Exemples 1 à 6... 15H40
Guide 115 CEI:2007 27 COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE APPLICATION DE L INCERTITUDE DE MESURE AUX ACTIVITÉS D ÉVALUATION DE LA CONFORMITÉ DANS LE SECTEUR ÉLECTROTECHNIQUE AVANT-PROPOS Cette première édition du Guide 115 de la CEI a été établie par le CTL de l IECEE conformément à la procédure donnée à l Annexe A de la Partie 1 des Directives ISO/CEI. Le texte de ce Guide est issu des documents suivants: Document d approbation C/1446/DV Rapport de vote C/1457/RV Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant abouti à l approbation de ce Guide.
28 Guide 115 CEI:2007 INTRODUCTION Ce Guide a été établi par le Comité des Laboratoires d Essai (en anglais: Committee of Testing Laboratories [CTL]) du système CEI d Essais de Conformité et de Certification des Equipements Electriques (IECEE) afin de donner des lignes directrices pour l application pratique des exigences concernant l incertitude de mesure de l'iso/cei 17025 aux essais de sécurité électrique réalisés dans le cadre de la méthode OC du système IECEE. La méthode OC du système IECEE est un accord international multilatéral conclu entre plus de 40 pays et quelques 60 organismes nationaux de certification pour l acceptation des rapports d essai sur les produits électriques ayant subi des essais selon les normes CEI. Le but du CTL est, entre autres tâches, de définir une analyse commune de la méthodologie d essai selon les normes CEI ainsi que d assurer et d améliorer de manière continue la répétabilité et la reproductibilité des résultats d essai entre les laboratoires membres. L approche pratique de l incertitude de mesure décrite dans ce Guide a été adoptée pour être utilisée dans les méthodes du système IECEE et elle est également largement utilisée dans le monde par les laboratoires d essai pour les essais des produits électriques selon les normes nationales de sécurité. Ce Guide présente un intérêt particulier pour les Comités d Etudes CEI suivants qui peuvent, si nécessaire, décider de l utiliser. COMITE D ETUDES 13 : MESURE DE L ENERGIE ELECTRIQUE, CONTROLE DES TARIFS ET DE LA CHARGE COMITE D ETUDES 17 : APPAREILLAGE COMITE D ETUDES 18 : INSTALLATIONS ELECTRIQUES DES NAVIRES ET DES UNITES MOBILES ET FIXES EN MER COMITE D ETUDES 20 : CABLES ELECTRIQUES COMITE D ETUDES 21 : ACCUMULATEURS COMITE D ETUDES 22 : SYSTEMES ET EQUIPEMENTS ELECTRONIQUES DE PUISSANCE COMITE D ETUDES 23 : PETIT APPAREILLAGE COMITE D ETUDES 32 : COUPE-CIRCUIT A FUSIBLES COMITE D ETUDES 33 : CONDENSATEURS DE PUISSANCE COMITE D ETUDES 34 : LAMPES ET EQUIPEMENTS ASSOCIES COMITE D ETUDES 35 : PILES COMITE D ETUDES 38 : TRANSFORMATEURS DE MESURE COMITE D ETUDES 39 : TUBES ELECTRONIQUES COMITE D ETUDES 40 : CONDENSATEURS ET RESISTANCES POUR EQUIPEMENTS ELECTRONIQUES COMITE D ETUDES 47 : DISPOSITIFS A SEMICONDUCTEURS COMITE D ETUDES 59 : APTITUDE A LA FONCTION DES APPAREILS ÉLECTRODOMESTIQUES COMITE D ETUDES 61 : SECURITE DES APPAREILS ELECTRODOMESTIQUES ET ANALOGUES COMITE D ETUDES 62 : EQUIPEMENTS ELECTRIQUES DANS LA PRATIQUE MEDICALE COMITE D ETUDES 64 : INSTALLATIONS ELECTRIQUES ET PROTECTION CONTRE LES CHOCS ELECTRIQUES COMITE D ETUDES 65 : MESURE ET COMMANDE DANS LES PROCESSUS INDUSTRIELS COMITE D ETUDES 66 : SECURITE DES APPAREILS DE MESURE, DE COMMANDE ET DE LABORATOIRE COMITE D ETUDES 76 : SECURITE DES RAYONNEMENTS OPTIQUES ET MATERIELS LASER COMITE D ETUDES 77 : COMPATIBILITE ELECTROMAGNETIQUE COMITE D ETUDES 78 : TRAVAUX SOUS TENSION COMITE D ETUDES 80 : MATERIELS ET SYSTEMES DE NAVIGATION ET DE RADIOCOMMUNICATIONS MARITIMES COMITE D ETUDES 82 : SYSTEMES DE CONVERSION PHOTOVOLTAÏQUES DE L ENERGIE SOLAIRE
Guide 115 CEI:2007 29 APPLICATION DE L INCERTITUDE DE MESURE AUX ACTIVITÉS D ÉVALUATION DE LA CONFORMITÉ DANS LE SECTEUR ÉLECTROTECHNIQUE 1 Domaine d application Ce Guide présente une approche pratique de l application de l incertitude de mesure aux activités d évaluation de la conformité dans le secteur électrotechnique. Il est spécifiquement conçu pour être utilisé dans les méthodes du système IECEE ainsi que par les laboratoires qui réalisent les essais des produits électriques selon les normes nationales de sécurité. L Article 4 décrit l application des principes de l incertitude de mesure. L Article 5 donne des lignes directrices pour la réalisation des calculs de l incertitude de mesure. L annexe A donne quelques exemples de calculs de l incertitude de mesure pour des essais d évaluation de la conformité de certains produits. 2 Documents de référence ISO/CEI 17025: Exigences générales concernant la compétence des laboratoires d étalonnage et d essais Guide pour l'expression de l'incertitude de mesure (GUM) (1995) [BIPM, CEI, FICC, ISO, UIPPA, UICPA, OIML] Vocabulaire international des termes fondamentaux et généraux de métrologie (VIM) (1996) [BIPM, CEI, FICC, ISO, UICPA, UIPPA, OIML].