MINISTERE DES TRANSPORTS

GRAND-DUCHE DE LUXEMBOURG MINISTERE DES TRANSPORTS REFERENCE: E13*03R00*03R02*1555*00 Luxembourg, le 23 mai 2005 19-21, Boulevard Royal L-2910 Luxembourg Tél 478-1 Télécopieur 241817 Télex 1465 CIVAIR LU ANNEXES: Documentation technique Communication concernant: Communication concerning: - DELIVRANCE D'UNE HOMOLOGATION APPROVAL GRANTED - EXTENSION D'HOMOLOGATION APPROVAL EXTENDED - REFUS D'HOMOLOGATION APPROVAL REFUSED - RETRAIT D'HOMOLOGATION APPROVAL WITHDRAWN - ARRET DEFINITIF DE LA PRODUCTION PRODUCTION DEFINITELY DISCONTINUED d'un type de dispositif catadioptrique en application du Règlement N 3 of a type of retro reflecting device pursuant to Regulation N 3 Numéro d'homologation: Approval number: E13*03R00*03R02*1555*00 Marque d'homologation: Approval number: 2a R-S1 01 02 IA 02 1555 sample of marking for the right-hand device 1. Marque de fabrique ou de commerce du dispositif: Trade name or mark of the device: TYC 2. Désignation du type de dispositif par le fabricant: Manufacturer's name for the type of device: 3. Nom et adresse du fabricant: Manufacturer's name and address: N 72-2, Shin-Leh Rd., An-Ping Industrial District, Tainan, Taiwan, R.O.C. 4. Nom et adresse du mandataire du fabricant (le cas échéant): If applicable, name and address of the manufacturer's representative: not applicable Page 1 of 4

E13*03R00*03R02*1555*00 5. Dispositif soumis à l'homologation le: Submitted for approval on: 28.10.2004 to 21.04.2005 6. Autorité déléguée: Assigned authority: Service technique chargé des essais: Technical service responsible for conducting approval tests: Société Nationale de Certification et d Homologation L-5201 Sandweiler TÜV Rheinland GmbH Centre Commercial "Le 2000" Z.I. route de Bettembourg 7. Date du procès-verbal d'essai: Date of test report: 09.05.2005 8. Numéro du procès-verbal d'essai: Number of test report: 84-R3-01224/04 9. Description sommaire: Concise description: - Isolé / fait partie d'un ensemble de dispositifs 2/: In isolation / part of an assembly of devices 2/: - Couleur de la lumière émise 2/: Colour of light emitted 2/: - Conditions géométriques du montage et variantes éventuelles: Geometrical conditions of installation and relating variations, if any: part of an assembly of devices blanc / rouge / jaune auto white / red / amber see the drawing of the information document 10. Position de la marque d'homologation: Position of the approval mark: on the outer lens 11. Motif(s) de l'extension d homologation (le cas échéant): Reason(s) for extension (if applicable): not applicable 12. Homologation 2/: Approval 2/: accordée / refusée / étendue / retirée granted / refused / extended / withdrawn Page 2 of 4

E13*03R00*03R02*1555*00 13. Lieu: Place: Luxembourg 14. Date: Date: 23 mai 2005 15. Signature: Signature: Pour le Ministre des Transports Paul SCHMIT Commissaire du Gouvernement 16. Les documents ci-après, portant le numéro d homologation indiqué ci-dessus peuvent être obtenus sur demande. The following documents, bearing the approval number shown above, are available on request. voir "INDEX DU DOSSIER D'HOMOLOGATION" ci-joint / see "INDEX TO TYPE-APPROVAL REPORT" -------------------------- 2/ Biffer la mention inutile / Strike out what does not apply. Page 3 of 4

GRAND-DUCHE DE LUXEMBOURG MINISTERE DES TRANSPORTS REFERENCE: E13*03R00*03R02*1555*00 Luxembourg, le 23 mai 205 19-21, Boulevard Royal L-2910 Luxembourg Tél 478-1 Télécopieur 241817 Télex 1465 CIVAIR LU ANNEXES: Documentation technique Index du dossier d'homologation Index to type-approval Numéro d'homologation: Approval number: Révision: Revision: E13*03R00*03R02*1555*00 00 Marque de fabrique ou de commerce: Trade name or mark: Type: Type: TYC 1. Procès-verbal d'essai: Test report: - Technical report: - Technical information: - List of modifications: N 84-R3-01224/04 Pages 1 to 8 Appendix L - Page 9 Appendix 0 - Page 10 2. Dossier du constructeur: Report of the manufacturer: - Information document: - Drawing of the device: N - A1 Pages 1, 2, 3 Page 4 3. Autres documents annexés: Other documents annexed: not applicable 4. Date de délivrance de l'homologation initiale: Date of issue of initial type approval: 23.05.2005 5. Date de la dernière délivrance de pages révisées: Date of last issue of revised pages: not applicable 6. Date de la dernière délivrance d'une homologation révisée: Date of last extension: not applicable Page 4 of 4

Test Report No.: 84-R3-01224/04 TEST REPORT according to ECE-Regulation Uniform provisions concerning the approval of retro reflecting devices for power-driven vehicles and their trailers No.: ECE-R3 including all amendments until No.: 02 series of amendments, suppl. 6, corr. 1 Previously granted ECE - approval : -- Structure of report : 1. Test object(s) and general test information 2. Test minutes 3. Remark concerning tested object(s) 4. Appendices 5. Statement of conformity TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 23-1224e4.doc Page 1

Test Report No.: 84-R3-01224/04 1. Test object(s) and general test information 1.1. Test object(s) - Identification no. : Not applicable - Model : - Remark : Rear and side retro reflector integrated into rear combination lamp, class IA. 1.2. General test information 1.2.1 Order issued by : -- (if different from manufacturer) 1.2.2 Test object received on : -- 1.2.3 Test date : See Appendix L 1.2.4 Test site : TYC Brother Industrial Co., Ltd., Tainan, Taiwan 1.2.5 Remark : The results of the test refer exclusively to the objects mentioned under point 1.1. of this report. TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 23-1224e4.doc Page 2

Test Report No.: 84-R3-01224/04 2. Test minutes 2.1. Test facilities : The measurement equipment used was in compliance with the test requirements. 2.2. Test results : The retro reflector has been tested according the amendments mentioned in Appendix 0. The photometric values were carried over from the basic report. Markings : The trade mark is marked clearly legible and indelible on the outer lens. Space for the approval mark and for the additional symbols is provided on the outer lens. 2.3. General specifications : The retro reflector is designed and made that under normal use their satisfactory operation is ensured and they retain the required characteristics. The components are not capable of being easily dismantled and the optical unit is not replaceable. The test samples have been tested in the chronological order indicated in Annex 12 of the Regulation, and in accordance with the test procedure stated in Annex 4 of the Regulation. In case of differences in the test procedure or requirements stated in the Regulation, the evaluations are based on the most unfavourable conditions specified by either the regulations. TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 23-1224e4.doc Page 3

Test Report No.: 84-R3-01224/04 2.4. Special tests Rear retro reflector number of Annex test test samples result of examination remark 5 shape and all complying dimensions 6 colorimetry all complying 10 heat All complying 7 photometry All complying 20', V=H=0 7 photometry C and D see 2.5 complete 8 water penetr. motor fuels oils A and B A and B A and B complying complying complying 4 colormetry A and B complying 20', V=H=0 photometry 8 corrosion abrasive - strength 9 stability of optical properties with ageing A and B -- -- complying -- -- not applicable *) -- -- not examined 11 colour- fastness -- -- not examined *) Remark : The device does not incorporate any metal component, the rear face of the device is not accessible. TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 23-1224e4.doc Page 4

Test Report No.: 84-R3-01224/04 Side retro reflector number of Annex test test samples result of examination remark 5 shape and all complying dimensions 6 colorimetry all complying 10 heat All complying 7 photometry All complying 20', V=H=0 7 photometry B and J see 2.5 complete 8 water penetr. motor fuels oils D and E D and E D and E complying complying complying 4 colormetry D and E complying 20', V=H=0 photometry 8 corrosion abrasive - strength 9 stability of optical properties with ageing D and E -- -- complying -- -- not applicable *) -- -- not examined 11 colour- fastness -- -- not examined *) Remark : The device does not incorporate any metal component, the rear face of the device is not accessible. TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 23-1224e4.doc Page 5

Test Report No.: 84-R3-01224/04 2.5. Photometric tests coefficients of luminous intensity (CIL) in accordance with Annex 7 of the Regulation Rear retro reflector distribution of the intensity of the retro reflector in [mcd/lux] sample 1 sample 2 min. *) horizontal angle L20º Vº R20º L20º Vº R20º vertical angle U10º 521.1 490.0 200 U5º 405.0 353.9 399.4 340.9 100 α=20' H 580.6 562.9 300 D5º 392.0 395.7 388.3 370.6 100 D10º 522.1 499.8 200 vertical angle U10º 17.7 17.7 2.8 U5º 19.5 10.2 18.6 10.2 2.5 α=1 30' H 33.5 30.7 5.0 D5º 10.2 18.6 18.6 10.2 2.5 D10º 17.7 17.7 2.8 *) Remark : Minimum requirements for red / white / amber retro reflector of class IA / IIIA / IVA / IB TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 23-1224e4.doc Page 6

Test Report No.: 84-R3-01224/04 Side retro reflector distribution of the intensity of the retro reflector in [mcd/lux] sample 1 sample 2 min. *) horizontal angle L20º Vº R20º L20º Vº R20º vertical angle U10º 408.7 427.3 200 U5º 260.1 353.0 399.4 325.1 100 α=20' H 520.2 557.4 300 D5º 278.7 380.8 436.6 334.4 100 D10º 473.7 492.3 200 vertical angle U10º 23.2 20.4 2.8 U5º 14.8 17.6 15.7 13.9 2.5 α=1 30' H 33.4 26.9 5.0 D5º 13.9 17.6 16.7 14.8 2.5 D10º 20.4 26.0 2.8 *) Remark : Minimum requirements for red / white / amber retro reflector of class IA / IIIA / IVA / IB 2.6. Illuminating surface : Not applicable 2.7. Explanatory note : This report describes the examination of the retro reflector as a part of a lamp device. For the examination of the other lamp of the device, refer to the following report: Type of lamp Test Report No. Rear direction indicator 84-R6-01222/04 Rear position lamp and stop lamp 84-R7-01223/04 2.8. Variants and components : Not applicable TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 23-1224e4.doc Page 7

Test Report No.: 84-R3-01224/04 3. Remark concerning tested object(s) All versions of the retro reflector(s) as stated in the information document are covered with the tested version(s) and test object(s) respectively. 4. Appendices L Technical information about the retro reflector type according to Annex 2 for the communication of the ECE-certificate 0 List of modifications 1 Information document No. : -A1 (4 pages) (incl. app.) 5. Statement of conformity The information folder and the type described there comply with the requirements in the above mentioned directive/regulation. The test report comprises - including app. L to 0 - the pages 1 to 10 and shall not be reproduced except in full without the written approval of the testing laboratory., date see Appendix L KFO/JYW B.S.M.E. J. Wu TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 23-1224e4.doc Page 8

Test Report No.: 84-R3-01224/04 Technical information about the retro reflector type according to Annex 2 for the communication of the ECE-certificate Appendix L 1 Trademark or trade name of : TYC the device 2 Manufacturers name for the : type of device 3 Name and address of the manufacturer 4 Name and address of manufacturer's authorised representative : No. 72-2, Shin-Leh Rd., An-Ping Industrial District, Tainan, Taiwan, R.O.C. : Not applicable 5 Submitted for approval on : October 28, 2004 to April 21, 2005 7 Date of the test report issued : May 9, 2005 by that service 9 Concise description in isolation : No part of an assembly of devices : Yes class colour of light emitted geometric conditions of installation and relating variations, if any : IA / IIIA / IVA / IB : Red / white / amber : See the drawing of the information document 10 Location of approval mark : On the outer lens 11 Reason(s) for extension : Not applicable TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 23-1224e4.doc Page 9

Test Report No.: 84-R3-01224/04 List of modifications Appendix 0 Correction of : -- Modification of : -- Addition of : -- Deletion of : -- TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 23-1224e4.doc Page 10

MODEL INFORMATION DOCUMENT NO. A1 P 1 / 4 ECE APPLICATION DOCUMENT TYPE : FUNCTION : REAR RETRO REFLECTOR SIDE RETRO REFLECTOR REAR DIRECTION INDICATOR REAR POSITION AND STOP LAMP APPLICABLE REGULATION : ECE REGULATION NO. 3-02 (Class IA) NO. 3-02 (Class IA) NO. 6-01 (Category 2a) NO. 7-02 FIRST APPLICATION ******************* DATE: October 28, 2004 T.Y.C. BROTHER INDUSTRIAL CO., LTD. No. 72-2, SHIN-LEH RD., AN-PING INDUSTRIAL DISTRICT, TAINAN, TAIWAN, R.O.C.

MODEL INFORMATION DOCUMENT NO. A1 P 2 / 4 I. SPECIFICATION DATA 1. MANUFACTURER S MARK, TRADE MARK AND APPLICABLE REGULATION: TYPE FUNCTION MANUFACTURER S MARK TRADE MARK APPLICABLE REGULATION REAR RETRO REFLECTOR SIDE RETRO REFLECTOR REAR DIRECTION INDICATOR REAR POSITION AND STOP LAMP N/A TYC ECE NO. 3-02 (Class IA) NO. 3-02 (Class IA) NO. 6-01 (Category 2a) NO. 7-02 2. DRAWING NO.: 11A399-1002-0000-01 3. NAME AND ADDRESS OF MANUFACTURER: T.Y.C. BROTHER INDUSTRIAL CO., LTD. No. 72-2, SHIN-LEH RD., AN-PING INDUSTRIAL DISTRICT, TAINAN, TAIWAN, R.O.C. 4. NAME AND ADDRESS OF REPRESENTATIVE OF MANUFACTURER: NOT APPLICABLE

MODEL INFORMATION DOCUMENT NO. A1 P 3 / 4 II. TECHNICAL DATA 1. LIGHT SOURCES: FUNCTION LIGHT RATED CATEGORY COLOR VOLTAGE WATTAGE (ECE REG NO.37) REAR RETRO REFLECTOR RED N/A N/A N/A SIDE RETRO REFLECTOR RED N/A N/A N/A REAR DIRECTION INDICATOR AMBER 12V 6W H6W REAR POSITION LAMP RED 12V 4.86W P21Wx 2 STOP LAMP RED 12V 21W P21W 2. CONSTRUCTION AND MATERIAL: CONSTRUCTION MATERIAL REMARKS OUTER LENS PMMA Red (for rear and side retro reflectors) Clear (colourless, for rear direction indicator, rear position and stop lamp) INNER LENS (A) PC Red (for rear position and stop lamp) INNER LENS (B) PC Amber (for rear direction indicator) INNER LENS (C) PC Clear (colourless, for rear direction indicator) HOUSING ABS REFLECTOR ABS+PC Aluminum vacuum coating on the inner side 3. LOCATION OF MARKING: MARKING LOCATION TRADE MARK TYC On the outer lens MANUFACTURER S MARK N/A N/A LAMP DESIGNATION MARK H6W, P21Wx 2 On the wire plate APPROVAL MARK E13 On the outer lens DATE: October 28, 2004 PERSON IN CHARGE: Ms. Jane Tsai PLACE: T.Y.C. BROTHER INDUSTRIAL CO., LTD. No. 72-2, SHIN-LEH RD., AN-PING INDUSTRIAL DISTRICT, TAINAN, TAIWAN, R.O.C.

E13*03R00*03R02*1555*00 Société Nationale de Certification et d'homologation L-5201 SANDWEILER (Luxembourg) Organisme accrédité OLAS EN 45011 Accréditation N 5/001 (Portée communiquée sur demande)

GRAND-DUCHE DE LUXEMBOURG MINISTERE DES TRANSPORTS REFERENCE: E13*06R00*06R01*1555*00 Luxembourg, le 23 mai 2005 19-21, Boulevard Royal L-2910 Luxembourg Tél 478-1 Télécopieur 241817 Télex 1465 CIVAIR LU ANNEXES: Documentation technique Communication concernant: Communication concerning: - HOMOLOGATION ACCORDEE APPROVAL GRANTED - HOMOLOGATION ETENDUE APPROVAL EXTENDED - HOMOLOGATION REFUSEE APPROVAL REFUSED - HOMOLOGATION RETIREE APPROVAL WITHDRAWN - ARRET DEFINITIF DE LA PRODUCTION PRODUCTION DEFINITELY DISCONTINUED d'un type d indicateur de direction en application du Règlement N 6 of a type of direction indicator pursuant to Regulation N 6 Numéro d'homologation: Approval number: E13*06R00*06R01*1555*00 Marque d'homologation: Approval mark: 2a R-S1 01 02 IA 02 1555 sample of marking for the right-hand device 1. Marque de fabrique ou de commerce du dispositif: Trade name or mark of the device: TYC 2. Désignation du type de dispositif par le fabricant: Manufacturer's name for the type of device: 3. Nom et adresse du fabricant: Manufacturer's name and address: 72-2 Shin-Leh Rd., An-Ping Industrial District Tainan, Taiwan, R.O.C. 4. Nom et adresse du mandataire du fabricant (le cas échéant): If applicable, name and address of the manufacturer's representative: not applicable Page 1 of 4

E13*06R00*06R01*1555*00 5. Dispositif soumis à l'homologation le: Submitted for approval on: 28.10.2004 to 21.04.2005 6. Autorité déléguée: Assigned authority: Service technique chargé des essais: Technical service responsible for conducting approval tests: Société Nationale de Certification et d Homologation L-5201 Sandweiler TÜV Rheinland GmbH Centre Commercial "Le 2000" Z.I. route de Bettembourg 7. Date du procès-verbal d'essai: Date of test report issued by that service: 09.05.2005 8. Numéro du procès-verbal d'essai: Number of test report issued by that service: 84-R6-01222/04 9. Description sommaire 3/: Concise description 3/: - Catégorie/category 2/: 1, 1a, 1b, 2a, 2b, 3, 4, 5, 6 - Nombre et catégorie de lampe(s) à incandescence: Number and category of filament lamp(s): - Module d éclairage 2/: Light source module 2/: - Code d identification propre au module d éclairage: Light source module specific identification code - Seulement pour une hauteur de montage limitée égale ou inférieure à 750 mm au-dessus du sol oui / non 2/: Only for limited mounting height of equal to or less than 750 mm above the ground yes / no 2/: - Conditions géométriques du montage et variantes éventuelles: Geometrical conditions of installation and relating variations, if any: one lamp H6W oui / non yes / no not applicable no see the drawing of the information document 10. Position de la marque d'homologation: Position of the approval mark: on the outer lens 11. Motif(s) de l'extension d homologation (le cas échéant): Reason(s) for extension (if applicable): not applicable 12. Homologation 2/: Approval 2/: accordée / étendue / refusée / retirée granted / extended / refused / withdrawn Page 2 of 4

E13*06R00*06R01*1555*00 13. Lieu: Place: Luxembourg 14. Date: Date: 23 mai 2005 15. Signature: Signature: Pour le Ministre des Transports Paul SCHMIT Commissaire du Gouvernement 16. La liste des pièces déposées au Service administratif ayant délivré l'homologation et pouvant être obtenu sur demande est annexée à la présente communication: The list of documents deposited with the Administrative Service which has granted approval is annexed to this communication and may be obtained on request: voir "INDEX DU DOSSIER D'HOMOLOGATION" ci-joint / see "INDEX TO TYPE-APPROVAL REPORT" 2/ Biffer les mentions qui ne conviennent pas / Strike out what does not apply 3/ Pour les feux équipés de sources lumineuses non remplaçables, indiquer le nombre et la consommation totale en watt des sources lumineuses / For lamps with non-replaceable light sources indicate the number and the total wattage of the light sources Page 3 of 4

GRAND-DUCHE DE LUXEMBOURG MINISTERE DES TRANSPORTS REFERENCE: E13*06R00*06R01*1555*00 Luxembourg, le 23 mai 2005 19-21, Boulevard Royal L-2910 Luxembourg Tél 478-1 Télécopieur 241817 Télex 1465 CIVAIR LU ANNEXES: Documentation technique Index du dossier d'homologation Index to type-approval Numéro d'homologation: Approval number: Révision: Revision: E13*06R00*06R01*1555*00 00 Marque de fabrique ou de commerce: Trade name or mark: Type: Type: TYC 1. Procès-verbal d'essai: Test report: - Technical report: - Technical information: - List of modifications: N 84-R6-01222/04 Pages 1 to 6 Appendix L - Page 7 Appendix 0 - Page 8 2. Dossier du constructeur: Report of the manufacturer: - Information document: - Drawing of the device: N - A1 Pages 1, 2, 3 Page 4 3. Autres documents annexés: Other documents annexed: not applicable 4. Date de délivrance de l'homologation initiale: Date of issue of initial type approval: 23.05.2005 5. Date de la dernière délivrance de pages révisées: Date of last issue of revised pages: not applicable 6. Date de la dernière délivrance d'une homologation révisée: Date of last extension: not applicable Page 4 of 4

Test Report No.: 84-R6-01222/04 TEST REPORT according to ECE-Regulation Uniform provisions concerning the approval of direction indicators for motor vehicles (except motor cycles) and their trailers No.: ECE-R6 including all amendments until No.: 01 series of amendments, suppl. 11, corr. 1 Previously granted ECE - approval : -- Structure of report : 1. Test object(s) and general test information 2. Test minutes 3. Remark concerning tested object(s) 4. Appendices 5. Statement of conformity TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 25-1222e4.doc Page 1

Test Report No.: 84-R6-01222/04 1. Test object(s) and general test information 1.1. Test object(s) - Identification no. : Not applicable - Model : - Remark : Rear direction indicator, category 2a 1.2. General test information 1.2.1 Order issued by : -- (if different from manufacturer) 1.2.2 Test object received on : -- 1.2.3 Test date : See Appendix L 1.2.4 Test site : TYC Brother Industrial Co., Ltd., Tainan, Taiwan 1.2.5 Remark : The results of the test refer exclusively to the objects mentioned under point 1.1. of this report. TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 25-1222e4.doc Page 2

Test Report No.: 84-R6-01222/04 2. Test minutes 2.1. Test facilities : The measurement equipment used was in compliance with the test requirements. 2.2. Test results : The lamp has been tested according the amendments mentioned in Appendix 0. The photometric values were carried over from the basic report. Markings : The trade mark is marked clearly legible and indelible on the outer lens of the lamp. The filament lamp type is clearly legible and indelible marked on the wire plate. Space for the approval mark and for the additional symbols is provided on the outer lens. 2.3. General specifications : The lamps are designed and made that under normal use their satisfactory operation is ensured and they retain the required characteristics. The colour of the light emitted inside the field of the light distribution grid defined in paragraph 2 of Annex 4 is within the limits of the coordinates prescribed in Annex 5 of the Regulation. 2.4. Photometric tests : The light emitted was obtained by means of an uncoloured and a coloured andstandard lamps of the categories stated in Appendix L, producing the required luminous flux. The light distribution angles and levels of intensity have been measured in accordance with Annex 4 of the Regulation, based on the manufacturer's indication of the centre of reference and axis of reference. TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 25-1222e4.doc Page 3

Test Report No.: 84-R6-01222/04 Results of photometric tests of the direction indicator, category 2a distribution of the intensity of the lamps in [cd] horizontal angle L20º L10º L5º V R5º R10º R20º vertical angle U10º 10 10 required U5º 5 10 35 10 5 minimum H 17.5 45 50 45 17.5 intensity D5º 5 10 35 10 5 D10º 10 10 vertical angle U10º 24.0 23.3 U5º 14.9 39.7 49.1 31.5 17.1 sample no. 1 H 55.6 66.5 81.2 68.3 53.1 (left side) D5º 20.0 62.3 99.9 69.4 34.3 D10º 72.7 73.2 vertical angle U10º 32.8 35.6 U5º 17.8 44.6 64.0 55.5 22.4 sample no. 2 H 54.3 70.5 83.2 84.9 77.1 (right side) D5º 20.3 50.3 76.6 72.5 31.3 D10º 43.2 54.8 maximum intensity [cd] minimum intensity in the fields defined in Annex 1 of the Regulation [cd] sample no. 1 sample no. 2 allowable maximum required minimum 101.3 88.2 350 -- 0.39 0.32 -- 0.3 The light distribution is substantially uniform. The light intensity is within the limits in the fields described in 6 and Annex 4 of the Regulation. TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 25-1222e4.doc Page 4

Test Report No.: 84-R6-01222/04 2.5. Illuminating surface : Vertical and horizontal outlines of the illuminating surface of the light-signalling device in relation to the centre of reference and in accordance with Annex 3 of Regulation No. 48. U L ----------- ----------- ------------------------ O I function rear direction indicator upper boundary (U) [mm] lower boundary (L) [mm] outer boundary (O) [mm] inner boundary (I) [mm] 22 22 22 22 2.6. Explanatory note : This report describes the examination of the direction indicator as a part of a lamp device. For the examination of the other lamp of the device, refer to the following report: Type of lamp Test Report No. 2.7. Variants and components : Not applicable Rear position lamp and stop lamp 84-R7-01223/04 Rear and side retro reflector 84-R3-01224/04 TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 25-1222e4.doc Page 5

Test Report No.: 84-R6-01222/04 3. Remark concerning tested object(s) All versions of the lamps as stated in the information document are covered with the tested version(s) and test object(s) respectively. 4. Appendices L Technical information about the lamp type according to Annex 2 for the communication of the ECE certificate 0 List of modifications 1 Information document No. : -A1 (4 pages) (incl. apps.) 5. Statement of conformity The information folder and the type described there comply with the requirements in the above mentioned directive/regulation. The test report comprises - including appendices L to 0 - the pages 1 to 8 and shall not be reproduced except in full without the written approval of the testing laboratory., date see Appendix KFO/JYW B.S.M.E. J. Wu TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 25-1222e4.doc Page 6

Test Report No.: 84-R6-01222/04 Technical information about the lamp type according to Annex 2 for the communication of the ECE certificate Appendix L 1 Trademark or trade name of : TYC the lamp 2 Manufacturers name for the : type of lamp 3 Name and address of the manufacturer 4 Name and address of manufacturer's authorised representative : No. 72-2, Shin-Leh Rd., An-Ping Industrial District, Tainan, Taiwan, R.O.C. : Not applicable 5 Submitted for approval on : October 28, 2004 to April 21, 2005 7 Date of the test report issued : May 9, 2005 by that service 9 Concise description category of device : 1 / 1a / 1b / 2a / 2b / 5 / 6 number and category of filament lamp(s) light source module light source module specific identification code geometrical conditions of installation and relating variations, if any only for limited mounting height of equal to or less than 750mm above the ground : One H6W : Yes / no : Not applicable : See the drawing of the information document : Yes / no 10 Location of approval mark : On the outer lens 11 Reason(s) for extension : Not applicable TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 25-1222e4.doc Page 7

E13*06R00*06R01*1555*00 Société Nationale de Certification et d'homologation L-5201 SANDWEILER (Luxembourg) Organisme accrédité OLAS EN 45011 Accréditation N 5/001 (Portée communiquée sur demande)

GRAND-DUCHE DE LUXEMBOURG MINISTERE DES TRANSPORTS REFERENCE: E13*07R00*07R02*1555*00 Luxembourg, le 23 mai 2005 19-21, Boulevard Royal L-2910 Luxembourg Tél 478-1 Télécopieur 241817 Télex 1465 CIVAIR LU ANNEXES: Documentation technique Communication concernant: Communication concerning: - DELIVRANCE D'UNE HOMOLOGATION APPROVAL GRANTED - EXTENSION D'HOMOLOGATION APPROVAL EXTENDED - REFUS D'HOMOLOGATION APPROVAL REFUSED - RETRAIT D'HOMOLOGATION APPROVAL WITHDRAWN - ARRET DEFINITIF DE LA PRODUCTION PRODUCTION DEFINITELY DISCONTINUED d'un type de dispositif en application du Règlement N 7 of a type of device pursuant to Regulation N 7 Numéro d'homologation: Approval number: E13*07R00*07R02*1555*00 Marque d'homologation: Approval mark: 2a R-S1 01 02 IA 02 1555 sample of marking for the right-hand device 1. Marque de fabrique ou de commerce du dispositif: Trade name or mark of the device: TYC 2. Désignation du type de dispositif par le fabricant: Manufacturer's name for the type of device: 3. Nom et adresse du fabricant: Manufacturer's name and address: 72-2 Shin-Leh Rd., An-Ping Industrial District Tainan, Taiwan, R.O.C. 4. Nom et adresse du mandataire du fabricant (le cas échéant): If applicable, name and address of the manufacturer's representative: not applicable Page 1 of 4

E13*07R00*07R02*1555*00 5. Dispositif soumis à l'homologation le: Submitted for approval on: 28.10.2004 to 21.04.2005 6. Autorité déléguée: Assigned authority: Service technique chargé des essais: Technical service responsible for conducting approval tests: Société Nationale de Certification et d Homologation L-5201 Sandweiler TÜV Rheinland GmbH Centre Commercial "Le 2000" Z.I. route de Bettembourg 7. Date du procès-verbal délivré par ce service: Date of test report issued by that service: 09.05.2005 8. Numéro du procès-verbal délivré par ce service: Number of test report issued by that service: 84-R7-01223/04 9. Description sommaire 3/: Concise description 3/: - Par catégorie de feu: By category of lamp: - Pour montage 2/: For mounting either 2/: - Couleur de la lumière émise 2/: Colour of light emitted 2/: - Nombre et catégorie de lampe(s) à incandescence: Number and category of filament lamp(s): - Tension de la source d alimentation spéciale (Volts): Special supply voltage (Volts): - Utilisation de la source d alimentation auxiliaire 2/: Application of additional supply system 2/: - Caractéristiques de cette source: Specification of this supply system: - Alimentation enclenchée: Cycle de fonctionnement: Tensions de crête à crête: et / ou tension effective (Volts): Switched power supply: Duty cycle: Peak to peak voltage: and / or effective voltage (Volts): - Module d éclairage 2/: Light source module 2/: - Code d identification propre au module d éclairage: Light source module specific identification code: R S1 à l extérieur ou à l intérieur ou les deux outside or inside or both rouge, jaune sélectif, blanc red, selective yellow, white rear position lamp: two P21W stop lamp: one P21W 12.8V (for rear position lamp only) oui / non (for rear position lamp only) yes / no Pulse With Module (PWM) supply system Duty cycle: 0.20 Peak to peak voltage: 12.8V and / or effective voltage: 2.56V oui / non yes / no not applicable Page 2 of 4

E13*07R00*07R02*1555*00 - Conditions géométriques de montage et variantes éventuelles: Geometrical conditions of installation and relating variations: - Seulement pour la hauteur de montage qui est égale ou inférieure à 750 mm par rapport au sol 2/: Only for limited mounting height of equal to or less than 750 mm above the ground 2/: see the drawing of the information document oui / non yes / no 10. Position de la marque d'homologation: Position of the approval mark : on the outer lens 11. Motif(s) de l'extension d homologation (le cas échéant): Reason(s) for extension (if applicable): not applicable 12. Homologation 2/: Approval 2/: accordée / prorogée / refusée / retirée granted / extended / refused / withdrawn 13. Lieu: Place: Luxembourg 14. Date: Date: 23 mai 2005 15. Signature: Signature: Pour le Ministre des Transports Paul SCHMIT Commissaire du Gouvernement 16. Est annexée la liste des pièces constituant le dossier d homologation déposé au Service administratif ayant délivré l'homologation et pouvant être obtenu sur demande. The list of documents deposited with the Administrative Service which has granted approval is annexed to this communication and may be obtained on request. voir "INDEX DU DOSSIER D'HOMOLOGATION" ci-joint / see "INDEX TO TYPE-APPROVAL REPORT" 2/ Biffer les mentions qui ne conviennent pas / Strike out what does not apply 3/ Pour des feux équipés de sources lumineuses non remplaçables indiquer le nombre et la consommation totale en watt des sources lumineuses / For lamps with non-replaceable light sources indicate the number and the total wattage of the light sources Page 3 of 4

GRAND-DUCHE DE LUXEMBOURG MINISTERE DES TRANSPORTS REFERENCE: E13*07R00*07R02*1555*00 Luxembourg, le 23 mai 2005 19-21, Boulevard Royal L-2910 Luxembourg Tél 478-1 Télécopieur 241817 Télex 1465 CIVAIR LU ANNEXES: Documentation technique Index du dossier d'homologation Index to type-approval Numéro d'homologation: Approval number: Révision: Revision: E13*07R00*07R02*1555*00 00 Marque de fabrique ou de commerce: Trade name or mark: Type: Type: TYC 1. Procès-verbal d'essai: Test report: - Technical report: - Technical information: - List of modifications: N 84-R7-01223/04 Pages 1 to 8 Appendix L - Pages 9, 10 Appendix 0 - Page 11 2. Dossier du constructeur: Report of the manufacturer: - Information document: - Drawing of the device: N - A1 Pages 1, 2, 3 Page 4 3. Autres documents annexés: Other documents annexed: not applicable 4. Date de délivrance de l'homologation initiale: Date of issue of initial type approval: 23.05.2005 5. Date de la dernière délivrance de pages révisées: Date of last issue of revised pages: not applicable 6. Date de la dernière délivrance d'une homologation révisée: Date of last extension: not applicable Page 4 of 4

Test Report No.: 84-R7-01223/04 TEST REPORT according to ECE-Regulation Uniform provisions concerning the approval of front and rear position (side) lamps, stop-lamps and end-outline marker lamps for motor vehicles (except motor cycles) and their trailers No.: ECE-R7 including all amendments until No.: 02 series of amendments, suppl. 8, corr. 1 Previously granted ECE - approval : -- Structure of report : 1. Test object(s) and general test information 2. Test minutes 3. Remark concerning tested object(s) 4. Appendices 5. Statement of conformity TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 24-1223e4.doc Page 1

Test Report No.: 84-R7-01223/04 1. Test object(s) and general test information 1.1. Test object(s) - Identification no. : Not applicable - Model : - Remark : - Rear position lamp and stop lamp. - Two light sources (P21Wx2) for rear position lamp, (supplied by a special power supply). 1.2. General test information 1.2.1 Order issued by : -- (if different from manufacturer) 1.2.2 Test object received on : -- 1.2.3 Test date : See Appendix L 1.2.4 Test site : TYC Brother Industrial Co., Ltd., Tainan, Taiwan 1.2.5 Remark : The results of the test refer exclusively to the objects mentioned under point 1.1. of this report. TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 24-1223e4.doc Page 2

Test Report No.: 84-R7-01223/04 2. Test minutes 2.1. Test facilities : The measurement equipment used was in compliance with the test requirements. 2.2. Test results : The lamp has been tested according the amendments mentioned in Appendix 0. The photometric values were carried over from the basic report. Markings : The trade mark is marked clearly legible and indelible on the outer lens of the lamp. The filament lamp type is clearly legible and indelible marked on the wire plate. Space for the approval mark and for the additional symbols is provided on the outer lens. 2.3. General specifications : The lamps are designed and made that under normal use their satisfactory operation is ensured and they retain the required characteristics. The colour of the light emitted inside the field of the light distribution grid defined in paragraph 2 of Annex 4 is within the limits of the coordinates prescribed in Annex 5 of the Regulation. 2.4. Photometric tests : The light emitted was obtained by means of the uncoloured standard lamps of the categories stated in Appendix L, producing the required luminous flux. Test procedure fulfill the requirements prescribed in paragraph 7.1. The light distribution angles and levels of intensity have been measured in accordance with Annex 4 of the Regulation, based on the manufacturer's indication of the centre of reference and axis of reference. In case of different intensities of light emitted required by the Regulation, the evaluations are based on the most unfavourable limits specified. TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 24-1223e4.doc Page 3

Test Report No.: 84-R7-01223/04 The rear position lamp is reciprocally incorporated with the stop lamp. The ratio between the luminous intensities of the two lamps when turned on simultaneously at the intensity of the position lamp when turned on alone is greater than 5:1 in the field required. The rear position lamp complies with the minimum intensity requirements when any one light source has failed. TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 24-1223e4.doc Page 4

Test Report No.: 84-R7-01223/04 Results of photometric tests of the rear position lamp distribution of the intensity of the lamps in [cd] horizontal angle L20º L10º L5º V R5º R10º R20º vertical angle U10º 0.8 0.8 required U5º 0.4 0.8 2.8 0.8 0.4 minimum H 1.4 3.6 4 3.6 1.4 intensity D5º 0.4 0.8 2.8 0.8 0.4 D10º 0.8 0.8 vertical angle U10º 3.8 3.6 U5º 2.0 5.0 7.2 4.6 3.3 sample no. 1 H 6.6 8.2 8.8 7.1 6.4 (left side) D5º 2.0 5.5 7.7 5.2 3.6 D10º 4.8 4.3 vertical angle U10º 4.9 4.3 U5º 5.5 6.9 8.5 4.0 2.0 sample no. 2 H 9.4 10.7 10.1 8.3 6.3 (right side) D5º 4.0 6.0 8.4 3.4 1.7 D10º 4.2 3.5 allowable maximum Required minimum sample no. 1 sample no. 2 maximum intensity [cd] 9.8 11.8 17 -- minimum intensity in the fields defined in Annex 1 of the Regulation [cd] 0.06 0.06 -- 0.05 TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 24-1223e4.doc Page 5

Test Report No.: 84-R7-01223/04 Results of photometric tests of the stop lamp distribution of the intensity of the lamps in [cd] horizontal angle L20º L10º L5º V R5º R10º R20º vertical angle U10º 12 12 required U5º 6 12 42 12 6 minimum H 21 54 60 54 21 intensity D5º 6 12 42 12 6 D10º 12 12 vertical angle U10º 39.4 43.2 U5º 28.8 48.9 75.0 53.2 37.1 sample no. 1 H 67.8 88.1 102.7 86.7 86.7 (left side) D5º 22.8 56.2 83.4 59.9 35.8 D10º 44.1 44.5 vertical angle U10º 41.2 41.2 U5º 34.3 50.9 73.6 52.8 28.5 sample no. 2 H 67.9 81.7 88.8 81.0 60.1 (right side) D5º 31.9 51.5 74.9 54.5 23.9 D10º 39.3 42.0 allowable maximum required minimum sample no. 1 sample no. 2 maximum intensity [cd] 106.5 92.3 185 -- minimum intensity in the fields defined in Annex 1 of the Regulation [cd] 1.47 1.42 -- 0.3 TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 24-1223e4.doc Page 6

Test Report No.: 84-R7-01223/04 2.5. Illuminating surface : Vertical and horizontal outlines of the illuminating surface of the light-signalling device in relation to the centre of reference and in accordance with Annex 3 of Regulation No. 48: U L ----------- ----------- ------------------------ O I function rear position lamp upper boundary (U) [mm] lower boundary (L) [mm] outer boundary (O) [mm] inner boundary (I) [mm] 55 55 104 18 stop lamp 55 55 15 15 2.6. Explanatory note : This report describes the examination of the rear position lamp and stop lamp as a part of a lamp device. For the examination of the other lamp of the device, refer to the following report: Type of lamp Rear direction indicator Rear and side retro reflector Test Report No. 84-R6-01222/04 84-R3-01224/04 2.7. Variants and components : Not applicable 3. Remark concerning tested object(s) TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 24-1223e4.doc Page 7

Test Report No.: 84-R7-01223/04 All versions of the lamps as stated in the information document are covered with the tested version(s) and test object(s) respectively. 4. Appendices L Technical information about the lamp type according to Annex 2 for the communication of the ECE certificate 0 List of modifications 1 Information document No. : -A1 (4 pages) (incl. apps.) 5. Statement of conformity The information folder and the type described there comply with the requirements in the above mentioned directive/regulation. The test report comprises - including app. L to 0 - the pages 1 to 11 and shall not be reproduced except in full without the written approval of the testing laboratory., date see Appendix L KFO/JYW B.S.M.E. J. Wu TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 24-1223e4.doc Page 8

Test Report No.: 84-R7-01223/04 Technical information about the lamp type according to Annex 2 for the communication of the ECE certificate Appendix L 1 Trademark or trade name of : TYC the lamp 2 Manufacturers name for the : type of lamp 3 Name and address of the manufacturer 4 Name and address of manufacturer's authorised representative : No. 72-2, Shin-Leh Rd., An-Ping Industrial District, Tainan, Taiwan, R.O.C. : Not applicable 5 Submitted for approval on : October 28, 2004 to April 21, 2005 7 Date of the test report issued : May 9, 2005 by that service 9 Concise description by category of lamps for mounting either colour of light emitted number and category of lamp(s) special supply voltage : 1. Rear position lamp: R 2. Stop lamp: S1 : Outside or inside or both : Red / white / selective yellow : 1. Two P21W 2. One P21W : 12.8V (for rear position lamp only) application of additional supply : Yes / no (for rear position lamp only) system specification of this supply system : Pulse Width Module (PWM) supply system switched power supply : Not applicable duty cycle : 0.20 TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 24-1223e4.doc Page 9

Test Report No.: 84-R7-01223/04 peak to peak voltage : 12.8V and/or effective voltage (volts) : 2.56V light source module light source module specific identification code only for limited mounting height of equal to or less than 750 mm above the ground geometrical conditions of installation and relating variations if any : Yes / no : Not applicable : Yes / no : See the drawing of the information document 10 Location of approval mark : On the outer lens 11 Reason(s) for extension : Not applicable TÜV Rheinland GmbH Centre Commercial Le 2000 Z.I. Telefon + 352 / 522 909 24-1223e4.doc Page 10