Sparq Powerbank 6000 Instructions Warranty Registration Your Sparq Powerbank comes with a one-year manufacturer s warranty. In order to activate the warranty, you must register your Powerbank as well as keep your purchase receipt. If you purchased your Powerbank from ZAGG.com, ZAGG has already registered it and has a copy of your proof of purchase. NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.zagg.com/faq
USB Out USB Out Micro USB LED LED Button
Introduction Your new Sparq Powerbank 6000 carries a ton of power and delivers a super fast charge to your favorite devices. With two USB outlets, each capable of delivering 2.1A power, you ll always get the fastest charge available, even when charging two devices at once. Charging Your Powerbank Your Powerbank comes fully charged and ready to go. When you have used it to charge your devices, here s how to recharge it: 1.Connect a micro USB cable to the matching port on the top of the Powerbank. 2.Connect the USB end of your cable to an outlet adapter and plug the adapter into an outlet. 3.LEDs on the top of the Powerbank will light, indicating how much of a charge the Powerbank has. Let the Powerbank charge until the LEDs turn off, indicating a full charge.
4.Disconnect the micro USB cable and place your Powerbank in a convenient spot where you can easily access it as soon as you need quick portable power. Charging Your Devices Your Powerbank features two USB charging ports that each deliver 2.1A power. This allows you to charge one or two devices at the same time, making it faster and easier than ever to power your mobile life. And with 6000mAh of power, there s enough to recharge your smartphone up to three times, or your tablet once. To charge your devices: 1.Connect a USB charging cable to the outlet of your choice on the Powerbank. 2.Connect the other end of the cable to the device you d like to charge. 3.Keep adventuring while your device, or devices, charge up.
Checking the Battery Level The Sparq Powerbank features five LEDs that clearly indicate its remaining power. To check how much power your Sparq Powerbank has: 1.Press the button located on the top left of your Powerbank. 2.The five LEDs will indicate remaining power. Five LEDs indicate you have between 80-100% power remaining. Four LEDs indicate you have between 60-79% power remaining. Three LEDs indicate you have between 40-59% power remaining. Two LEDs indicate you have between 20-39% power remaining. One LED indicates you have less than 19% power remaining. Note: Your Sparq Powerbank 6000 includes an overload protection circuit to protect it and your devices. If your Sparq Powerbank 6000 isn t charging and seems unresponsive, press and hold the battery indicator button for three seconds (the LEDs will turn on then off). If your Powerbank is still unresponsive, contact ZAGG Customer Service.
Care and Maintenance Your Sparq Powerbank is a durable backup battery. But since it is meant to keep you powered on all your adventures, chances are it will be exposed to a little dirt and grime. Here s how you can best take care of it. If your Sparq Powerbank is exposed to dirt and grime, wipe it clean with a damp cloth. Avoid getting water in the micro USB port and the USB outlet ports. When charging your device/s, make sure the Powerbank is on a flat surface away from edges where it could fall. If your Powerbank does fall, check it thoroughly for damage before charging it or your device/s.
Questions? To reach a trained customer service representative, please use one of the following: ZAGG.com/support questions@zagg.com 1-800-700-ZAGG [9244] 00-1-801-839-3906 for international customers For unparalleled scratch protection for your devices, we recommend ZAGG s InvisibleShield. 2005-2014 ZAGG Inc All Rights Reserved. PATENT PENDING NASDAQ: ZAGG MADE IN CHINA ZAGG and InvisibleShield are trademarks owned by ZAGG Intellectual Property Holding Co., Inc. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help.
Instructions pour Sparq Powerbank 6000 Enregistrement de la garantie Votre Sparq Powerbank est livré avec une garantie du fabricant d un an. Pour activer la garantie, vous devez enregistrer votre Powerbank et garder votre reçu d achat. Si vous avez acheté votre Powerbank de ZAGG. com, ZAGG l a déjà enregistré et a une copie de votre preuve d achat. BESOIN D AIDE? VEUILLEZ CONSULTER NOTRE SECTION FAQ À: www.zagg.com/faq
USB Out USB Out Micro USB LED LED Button
Introduction Votre nouveau Sparq Powerbank 6000 apporte une tonne d énergie et offre une charge ultra-rapide pour vos appareils préférés. Avec deux prises USB, chacune capable de délivrer une énergie de 2.1A, vous aurez toujours la charge la plus rapide disponible, même lorsque vous chargez deux appareils à la fois. Charger votre Powerbank Votre Powerbank est entièrement chargé et prêt à être utilisé. Lorsque vous l avez utilisé pour recharger vos appareils, voici comment le recharger: 1.Connectez un câble micro USB au port correspondant sur le sommet du Powerbank. 2.Branchez l extrémité USB du câble à un adaptateur de prise et branchez l adaptateur dans une prise. 3.Les voyants LED sur le dessus du Powerbank s allument, indiquant la charge restante dans le Powerbank. Laissez le Powerbank se charger jusqu à ce que les voyants LED s éteignent, indiquant une charge complète.
4.Débranchez le câble micro-usb et placez votre Powerbank dans un endroit pratique où vous pouvez facilement y accéder dès que vous avez besoin, d une source d énergie portative rapide. Recharger vos appareils Votre Powerbank dispose de deux ports de charge USB qui fournissent chacun une puissance de 2.1A. Cela vous permet de charger un ou deux appareils en même temps, rendant plus rapide et plus facile que jamais de garder votre vie mobile pleine d énergie. Et avec 6 000mAh d énergie, il y en a assez pour recharger votre téléphone intelligent jusqu à trois fois ou votre tablette une fois. Pour recharger vos appareils: 1.Connectez un câble de recharge USB à la prise de votre choix sur le Powerbank. 2.Branchez l autre extrémité du câble à l appareil que vous souhaitez charger. 3.Continuez votre aventure pendant que vos appareils se chargent.
Vérifier le niveau de la pile Le Sparq Powerbank dispose de cinq voyants qui indiquent clairement l énergie restante. Pour vérifier combien d énergie reste dans votre Sparq Powerbank: 1.Appuyez sur le bouton situé sur le sommet, à gauche de votre Powerbank. 2.Les cinq voyants LED indiquent la charge restante. Cinq voyants LED indiquent que vous avez entre 80-100% de charge restante. Quatre voyants LED indiquent que vous avez entre 60-79% de charge restante. Trois voyants LED indiquent que vous avez entre 40-59% de charge restante. Deux voyants LED indiquent que vous avez entre 20-39% de charge restante. Une voyant LED indique que vous avez moins de 19% de charge restante. Note : Votre Sparq Powerbank 6000 inclut un circuit de protection contre les surcharges afin de le protéger et de protéger vos dispositifs. Si votre Sparq Powerbank 6000 n est pas en chargement et qu il semble ne pas répondre, presser et tenir le bouton d indicateur de batterie pour trois secondes (les LED s allumeront et s éteindront ensuite). Si votre Powerbank ne répond toujours pas, contacter le service la clientèle de ZAGG.
Entretien et maintenance Votre Sparq Powerbank est une pile de secours durable. Cependant, comme il est destiné à vous fournir de l énergie pendant toutes vos aventures, il est probable qu il sera exposé à un peu de saleté et de crasse. Voilà comment vous pouvez en prendre soin. Si votre Golite 2.0 est sale, essuyez-le avec un chiffon humide. Évitez tout contact avec l eau pour votre Golite 2.0. Lorsque vous chargez votre appareil, assurez-vous que le Golite est sur une surface plane loin des bords d où il pourrait tomber. Ne déposez pas votre Golite à la verticale pour le recharger ou pour recharger vos appareils. Posez-le sur une surface plane et stable pour qu il ne tombe pas et ne soit pas égratigné ou endommagé. Si votre Golite tombe, vérifiez-le soigneusement pour identifier les dommages possibles avant de le charger ou de charger votre appareil et avant d allumer la lampe de poche.
Questions? Pour obtenir plus d aide, visitez notre FAQ à : www.zagg.com/faq Pour joindre un représentant au service à la clientèle qualifié, veuillez utiliser l une des options suivantes : ZAGG.com/support/contact.php questions@zagg.com 1-800-700-ZAGG [9244] 00-1-801-839-3906 pour les clients internationaux Pour une protection inégalée de vos appareils contre les éraflures, nous recommandons l InvisibleShield de ZAGG. 2005-2014 ZAGG Inc. Tous droits réservés. BREVET EN ATTENTE NASDAQ: ZAGG FABRIQUÉ EN CHINE ZAGG et InvisibleShield sont des marques déposées par ZAGG Intellectual Property Holding Co., Inc. Les changements ou modifications non expressément approuvés par la partie responsable de la conformité pourraient annuler l autorité de l utilisateur à utiliser l équipement. Cet équipement a été testé et trouvé conforme aux limites pour un appareil numérique de classe B, conformément à la partie 15 des règles de la FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une
installation résidentielle. Cet équipement génère, utilise et peut émettre une énergie de radiofréquence et, s il n est pas installé et utilisé conformément aux instructions, peut causer des interférences nuisibles aux communications radio. Cependant, il n existe aucune garantie que des interférences ne se produiront pas dans une installation particulière. Si cet équipement provoque des interférences nuisibles à la réception radio ou télévision, ce qui peut être déterminé en mettant l équipement sous tension et hors tension, l utilisateur est encouragé à essayer de corriger l interférence par une ou plusieurs des mesures suivantes: Reorient or relocate the receiving antenna. Réorienter ou déplacer l antenne de réception. Augmenter la distance entre l équipement et le récepteur. Connecter l équipement à une sortie sur un circuit différent de celui sur lequel le récepteur est branché. Consulter le revendeur ou un technicien radio/tv expérimenté pour de l aide supplémentaire.