ToxiPro ToxiPro with its real-time reading, two-colour visual alarm, and two-tone audible alarm is the single gas detector for demanding users
ToxiPro Tough durable housing Small, lightweight design Robust, shock-resistant housing Ultra clear backlit display Fully illuminated backlit LCD Easy to read with clear data display Continuous, real-time gas readings Peak, STEL and TWA readings Effective gas alarm indication Highly visible bright LED visual alarms (red and yellow) Distinctive loud two-tone audible alarm Vibration alarm that demands attention in high noise environments Designed for tough environments IP66/67 rating Alarms that demand attention in all hazard locations Automatic black box datalogger Cost-effective ongoing use Field serviceable When used with optional IQ Express docking station, the ongoing cost of bump testing and calibration is reduced by up to 60% Integral datalogging Includes a black box datalogger that automatically logs up to 100 sessions Can be upgraded to a full datalogger if required ToxiPro is a durable, high performance portable unit designed to offer single gas detection in tough environments. Optimised to deliver enhanced safety to workers and a cost-effective ongoing use over product life, ToxiPro provides clear alarm status prompts that demand attention. Highly visible bright red and yellow LEDs effectively warn users of dangerous conditions, whilst the device s optional vibration alarm ensures workers are alerted to dangers even in high noise environments. Providing real-time Peak, STEL and TWA readings on a clear backlit LCD display, ToxiPro includes a black box recorder feature that allows the device to automatically datalog up to 100 sessions, including measurements and time history data. When used with the ToxiPro IQ Express docking station, the ongoing calibration and bump testing of ToxiPro can be reduced by up to 60%. The IQ Express docking station is able to deliver fully automated bump test, calibration, meter diagnostics and data download, providing considerable savings over product life and reducing the time spent carrying out ongoing maintenance activities. Visible alarm lights 1. Normal 3. Danger condition Optional Accessories Replacement sensor filter Lanyard Replacement belt clip Replacement clothes clip Replacement mobile phone-style swivel clip Manual sample draw kit (includes an adapter, probe and 25 cm (10 in.) tubing (please note: not for use with Cl 2 and ClO 2 ) Calibration/sample draw adapter Calibration adapter including FEP lined tube for reactive gases (NH 3, CL 2, CLO 2, HCN and NO 2 ) IQ Express Bump Test and Calibration Station: Includes IQ Express, 110V power supply, USB cable, software manual, 60 cms (2 ft) tubing with fitting and demand flow Four unit mounting bracket for IQ Express including tubing and magnetic hardware. (Please note: USB hub, power supply, demand flow regulator and calibration gas not included) Four unit mounting bracket for IQ Express including tubing, magnetic hardware, and 110V 4X power supply ToxiPro datalogger upgrade (please note: the device must be returned to Biosystems for upgrade) ToxiPro BioTrak software kit including BioTrak software and manual (please note: computer must support IrDA to download) 2. Warning condition
General Specification Housing Weight Size Case material Dust and water resistance rating Environmental ratings 99 g (3.5oz) 8.44 cm x 5.56 cm x 2.95 cm (3.325 in. x 2.19 in. x 1.16 in.) Clear polycarbonate with TPE overmold IP66/IP67 RF immunity Conforms to EN 50270 RF emissions Conforms to IEC 61000-6-4 ESD immunity Conforms to IEC 61000-4-2 Approvals Backlight Type Gas types UL Class I, Div 1, Group A,B,C,D T4 UL Class II, Div 1, Group E,F,G CSA Class I, Div 1, Group A,B,C,D T4 CSA Class II, Div 1, Group E,F,G ATEX (DEMKO) II 1 G Ex ia IIC T4 IECEx Ex ia IIC T4 Ga CE Mark CQST (China) Ex ia IIC T4 Multi-colour LED backlight Available sensors CO, CO-H, H 2 S, O 2, SO 2, PH 3, NH 3, CL 2, HCN, NO 2 Alarm levels (default) CO, CO-H H 2 S O 2 % SO 2 CL 2 NH 3 NO 2 PH 3 HCN Warning alarm (ppm) 35 10 23.5 2 0.5 25 1 0.3 4.7 Danger alarm (ppm) 100 20 19.5 5 1 35 5 1 4.7 TWA alarm (ppm) 35 10 na 2 1 35 1 1 4.7 STEL alarm (ppm) 35 15 na 5 0.5 25 1 0.3 4.7 Ranges CO CO-H H 2 S SO 2 O 2 CL 2 NH 3 NO 2 HCN PH 3 Resolution 0-999 0-999 0-200 0-100 0-30 0-20 0-100 0-20 0-100 0-20 CO CO-H H 2 S SO 2 O 2 CL 2 NH 3 NO 2 HCN PH 3 1 ppm 1 ppm 1 ppm 0.1 ppm 0.1%/Vol 0.1 ppm 1 ppm 0.1 ppm 0.1 ppm 0.01 ppm Battery Battery life 9000 hours Shelf life 4000 hours Type Lithium Manganese Dioxide Battery replaceable Yes Reverse battery protection Yes Datalogging Number of sessions up to 100 Number of intervals up to 8100 Number of events 100 Black box datalogger up to 8100 intervals at one minute Can be upgraded to a full datalogger at any time. Activation code and BioTrak PC software required Instrument (Continuous storage) 0 to 110ºF (-18 to 43ºC) (Intermittent <30 minutes; H 2 S) -40 to 140ºF (-40 to 60ºC) (Intermittent <30 minutes; Others) -20 to 120ºF (-29 to 49ºC) Humidity range 15-95% RH, non-condensing (0-95% RH <= 4 hours) Alarm sound levels (two-tone) 102 db @ 10 cm
Our Product Range Fixed Gas Monitoring Honeywell Analytics offers a wide range of fixed gas detection solutions for a diverse array of industries and applications including: Commercial properties, industrial applications, semiconductor manufacturers, energy plants and petrochemical sites.» Detection of flammable, Oxygen and toxic gases (including exotics)» Innovative use of four core sensing technologies paper tape, electrochemical cell, catalytic bead and infrared» Capability to detect down to Parts Per Billion (ppb) or Percent by Volume (%v/v)» Cost effective regulatory compliance solutions Portable Gas Monitoring When it comes to personal protection from gas hazards, Honeywell Analytics has a wide range of reliable solutions ideally suited for use in confined or enclosed spaces. These include:» Detection of flammable, Oxygen and toxic gases» Single gas personal monitors worn by the individual» Multi-gas portable gas monitors used for confined space entry and regulatory compliance» Multi-gas transportable monitors used for temporary protection of area during site construction and maintenance activities Technical Services At Honeywell Analytics, we believe in the value of great service and customer care. Our key commitment is providing complete and total customer satisfaction. Here are just a few of the services we can offer:» Full technical support» Expert team on hand to answer questions and queries» Fully equipped workshops to ensure quick turnaround on repairs» Comprehensive service engineer network» Training on product use and maintenance» Mobile calibration service» Customised programmes of preventative/corrective maintenance» Extended warranties on products France Nordic Spain and Portugal Isabelle Thoris Customer Service Tel: +33 678 03 34 76 Email: isabelle.thoris@honeywell.com Carolina Backlund Market Support - Nordic Customer Service: +46 42 88 200 Direct Tel: +46 42 88 121 Fax: +46 42 73 968 Email: carolina.backlund@honeywell.com Antonio Calle Customer Care Manager Tel: +34 91 676 45 21 Fax: +34 91 677 08 98 Mobile: +34 696 42 06 26 Email: antonio.calle@honeywell.com Germany and Central Europe Ulf Sievers Tel: +49 451 70 274 13 Customer Service Leader Fax: +49 451 70 274 51 Email: ulf.sievers@honeywell.com Veronica Nilsson Market Support - Nordic Poland and Slovakia Customer Service: +46 42 88 200 Direct Tel: +46 42 88 170 Fax: +46 42 73 968 Email: veronica.nilsson@honeywell.com United Kingdom Chris Miller Customer Services Supervisor Tel: +44 1256 693200 Fax: +44 1256 693300 Mobile: +44 7500 445435 Email: chris.miller2@honeywell.com Jocelyne Gobert Customer Service Benelux Italy Tiziana Pasolini Customer Care Tel: +32 2 7282116 Fax: +32 2 7282396 Email: jgobert@sperian.com Tel: +39 0382 812111 Fax: +39 0382 84113 Email: tiziana.pasolini@honeywell.com Joanna Sosin Customer Service Assistant Karolina Jóźwiak Customer Service Assistant Tel: +48 12 656 57 31 Email: jsosin@sperian.com Tel: +48 42 649 12 67 Email: kjozwiak@sperian.com After Sales Service ZAC Athélia 4 375 Avenue du Mistral Bât B, Espace Mistral 13600 La Ciotat, France Tel: +33 4 42 98 17 70 Fax: +33 4 42 71 97 05 Email: PortablesFR@honeywell.com Please Note: While every effort has been made to ensure accuracy in this publication, no responsibility can be accepted for errors or omissions. Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently issued regulations, standards, and guidelines. This publication is not intended to form the basis of a contract. H_Biosystems_ToxiPro_DS01117_V1_EMEAI 03/12 2012 Honeywell Analytics 12949
EURO-INDEX Service Entretien et calibrage d instruments de mesure... La succursale d EURO-INDEX aux Pays-Bas dispose d un laboratoire de service et de calibrage particulièrement moderne. Les instruments de mesure y sont préventivement entretenus, réparés, calibrés et ajustés si nécessaire. Le laboratoire de service et de calibrage d EURO-INDEX est divisé en différentes disciplines, en fonction du type d instrument de mesure et des grandeurs mesurées. Pression Analyse de gaz Température (y compris les mesures de température infrarouge et la thermographie) Grandeurs électriques Détection de gaz Vitesse et débit d air Pourquoi un certificat de calibrage?... Un certificat de calibrage mentionne la déviation d un instrument de mesure par rapport à nos étalons, traçables aux standards (inter)nationaux. Les résultats de mesure sont consignés sur le certificat avec l incertitude par rapport aux spécifications indiquées par le fabricant. En l absence de certificat de calibrage, vous pouvez supposer que l instrument soit conforme aux spécifications d usine, mais vous ne pouvez pas le prouver. Un certificat d essai du fabricant est trop concis pour démontrer la linéarité et n est pas nominatif (ce qui, en fait, est une exigence). SPECIMENEN SPECIMEN MQS... MQS est un système de services exclusif pour l entretien périodique et le calibrage de vos instruments de mesure. De multiples aspects sont réglés pour vous, afin de vous libérer de tout souci lors de l utilisation de vos instruments de mesure. Le prix est fixé pour la durée de vie de l instrument (à condition d effectuer les opérations MQS périodiquement au laboratoire de calibrage d EURO-INDEX suivant les avis de recalibrage) Aucun frais de main-d œuvre n est requis lors d une opération MQS Calibrage avant ajustage (précalibrage) si possible Ajustage et (post)calibrage si nécessaire Réparation et entretien préventif Appel gratuit avec avis de recalibrage Contrôle des fonctionnalités de l instrument Cinq ans d historique pour toutes les données 10 % de remise sur les pièces de rechanges Enregistrement du numéro de série Livraison franco par retour Accréditation RvA... Le laboratoire de calibrage d EURO-INDEX dispose depuis le 21 août 1997 d une accréditation RvA NEN-EN-ISO/ IEC 17025. Cette accréditation est valable pour différentes grandeurs, telles que spécifiées dans le scope du numéro d accréditation K105 sur www.rva.nl. Un certificat de calibrage d instruments de test et de mesure peut être livré pour les grandeurs stipulées dans le scope précité. Les mesures sont effectuées à l aide d étalons dont la traçabilité aux standards (inter)nationaux a été démontrée à l organisme d accréditation RvA («Raad voor Accreditatie» - Pays-Bas). L Accord Multilatéral entre les États membres de la Communauté européenne régit l acceptation mutuelle des organismes d accréditation. Un certificat de calibrage de la RvA est donc internationalement valable. En outre, un certificat de calibrage RvA renseigne l incertitude sur les résultats de mesures effectuées. Location d instruments de mesure... EURO-INDEX propose un assortiment d instruments de mesure en location. Nous déterminons quel instrument vous convient dans le cadre de vos activités spécifi ques, suivant l avis professionnel d un de nos spécialistes produits. Les instruments sont livrés complet avec leurs accessoires, y compris les certifi cats de calibrage traçables. Sous réserve de modifications EURO-INDEX FR 13001