1812 NFClapets coupefeu et Volets de désenfumage D.A.S. NF 264 www.marquenf.com RfTechnologies nv Lange Ambachtstraat 40 9860 Oosterzele Belgium Tel +2 9 62 1 71 Fax +2 9 62 07 www.rft.be info@rft.be
Content Content Product presentation Range...2 Fire resistance Approvals and test reports Options... Storage and handling Dimensions and installation...4 Electrical connections...6 Operating...7 Maintenance Evolution kits...8 Technical data...9 Free air passage...10 Sample order...11 Product presentation smoke evacuation shutters are noted for their superior airtight properties. smoke evacuation shutters offer a fireresistance of 60 to 120 minutes, and ensure minimum pressure loss. They were developed in accordance with the European product standard EN 121018 and tested according to the EN 16610 standard. The shutter 1V is available in motorised model (ME). Smoke evacuation shutters are meant for the evacuation of smoke in a number of buildings, depending on local legislation (apartment buildings, publicaccess buildings (PAB), tall buildings, etc.) Tested according to EN 16610, product conform to norm EN 121018 and NF S 619710 Superior air tightness Minimal pressure drop Suitable for mounting in calciumsilicate duct and staff Easy to install Maintenance free For indoor applications 1 4 7 2 8 1. 1 shutter (1V) / 2 shutters (2V) 2. Aluminium frame. Lock + key 4. Connection compartment. Blocking mechanism 6. Central support 7. Product marking 8.Rearmation motor 6 4 1V 2V 1V ME Range 1V 60 1V 120 2V 60 2V 120 1V 60 ME 2V 120 ME W= Width H= Height Minimal dimensions W x H [mm] 00x8 0x8 0x8 Maximal dimensions W x H [mm] 700x107 1100 x110 700x107 See complete range p. 1011 2
Fire resistance according to en 1014 thickness plates 1V (ME)/2V 60 1V (ME)/2V 120 Mounting in calciumsilicate duct 0 mm 0 mm EI 120 (vedi o) Mounting in staff duct 0 mm 4 mm EI 120 (vedi o) E = integrity 60/120 = fire resistance i o = fire side randomly I = thermal insulation ved = vertical duct AA = automatic activation S = smoke leakage 100 = pression level multi = multiple compartment Approvals and test reports All our shutters are submitted to tests by official test institutes. Reports of these tests form the basis for the approvals of our dampers 1812 Europe : Classification following EN 121018 (Certificat 1812CPD1042) France : NF certificat : 0,2 (1V) and 0,26 (2V) ISO : Certification: ISO 9001 Options 1. Bipolar beginning and end of range switch FDCB 2. Mounting frame KAP. Technical front protection grill GFVPB 2 bipolar beginning and end of range switches (FDCB), FDCU standard included Build in mounting frame for all wall types (delivered separately) Steel frame with grill in perforated steel plate (delivered separately) icaution: Using a mounting frame has an impact on the dimensions of the opening.
Storage and handling As the smoke evacuation shutter is a safety element it needs to be stored and handled with caution. icaution: store in a building away from humidity avoid any kind of damage avoid contact with water It is recommended: to unload in a dry area to avoid shocks not to rotate the smoke shutter while moving it not to use the shutter as a scaffold, working table, etc. not to store smaller shutters inside larger ones Dimensions and installation 2 (1V) Wn + 2 (2V) Wn/2 + 66 1 10 min.10 Wn Wn + 10 Wn + 20 Wn + 4 Legend : 1. Refractory material (ex. calciumsilicate plate) 2. Sealing (ex. plaster) if mounting frame is used. KAP mounting frame (option) icaution : When fitting, the shutter should be protected from any sealing products and handled with care. Before putting the installation into operation, clean off all the dust and dirt. If fitting in a smoke evacuation duct, bear in mind the shutter's clearance. 4
Rf Technologies Lange Ambachtstraat 40 9860 Oosterzele Belgique DÉCLARATION DE CONFORMITÉ 1812CPD Nous, RFTechnologies NV déclarons sous notre seule responsabilité que le produit : Volet de désenfumage auquel se rapporte la présente déclaration, est conforme aux spécifications essentielles conformément à la norme EN 121018:2011 et autres dispositions de la directive du Conseil européen (89/106/CEE). Volet de désenfumage Organes de commande / mécanisme de commande : Commande manuelle par serrure et déclenchement électrique par démagnétisation de ventouse Détection de position par capteurs de position Maintien position ouverte par bras en acier plié Résistance au feu selon EN 16610 et classification selon EN 1014: Gamme Type Paroi Classification 60 Conduit Promatect L00 0 mm EI 60 (v ed i o) S 100 AA multi 1V (1 vantail): Conduit Geoflam 0 mm EI 60 (v ed i o) S 100 AA multi 00x8 mm jusqu à 700x107 mm Conduit Exthamat 4 mm EI 60 (v ed i o) S 100 AA multi 120 2V (2 vantaux): 0x8 mm jusqu à 1100x110 mm Conduit Promatect L00 0 mm EI 120 (v ed i o) S 100 AA multi Conduit Geoflam 4mm EI 120 (v ed i o) S 100 AA multi Conduit Exthamat 4 mm EI 120 (v ed i o) S 100 AA multi Conditions nominales d activation/sensibilité Délai de réponse (temps de réponse) Température de fonctionnement élevée selon EN 121018 4.2.1. Fiabilité de fonctionnement Durabilité du délai de réponse de la fiabilité de fonctionnement Accessoires validés: Précadre de type KAP Ajout de mastic entre le cadre du volet et le conduit Réarmement à l aide d un moteur de type VAME Conforme activation automatique Conforme activation automatique PND 00 cycles sans charge Conforme Déclaration basée sur le certificat de conformité n 1812CPD1042 d Efectis. Date & lieu de délivrance: Oosterzele, décembre 2012 Signature: Tom Van Leuven Directeur Technique CED_V1 _FR_A 01/201 If the product is manipulated in any other way than described in this manual, RfTechnologies will decline any responsibility and the guarantee will immediately expire 1