TQB2AA0421-1 PRINTED IN USA 20502 Téléprojecter hate définition Manel d tilisation PT-47WX52C PT-47WX42C PT-53WX52C PT-56WX52C PT-47WX52C PT-47WX42C PT-53WX52C PT-56WX52C HDTV Projection Monitor Operating Instrctions TQB2AA0421-1 20502 IMPRIMÉ AUX ÉTATS-UNIS
WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To redce the risk of electric shock do not remove cover or back. No ser-serviceable parts inside. Refer servicing to qalified service personnel. The lightning flash with arrow head within a triangle is intended to tell the ser that parts inside the prodct are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the ser that important operating and servicing instrctions are in the papers with the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. FCC CAUTION: ANY CHANGES OR MODIFICATIONS TO THIS PTV RECEIVER NOT EXPRESSLY APPROVED BY MATSUSHITA ELECTRIC CORPORATION OF AMERICA COULD CAUSE HARMFUL INTERFERENCE, WHICH WOULD VOID THE USER S AUTHORITY TO OPERATE THIS EQUIPMENT. ENVIRONMENTAL NOTICE: THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS INDUSTRIES ALLIANCE: <HTTP://WWW.EIAE.ORG.> This prodct incorporates U.S. Patent 6,266,098 B1; Isse date: Jly 24, 2001; assigned to Matsshita Electric Corporation of America; other U.S. and foreign patents pending. High Definition Sond Manfactred nder license from BBE Sond, Inc. Licensed by BBE Sond, Inc. nder USP4638258 and 4482866. BBE and BBE symbol are registered trademarks of BBE Sond, Inc. Read these instrctions completely before operating television. Contents are sbject to change withot notice or obligation. Copyright 2002 by Matsshita Electric Corporation of America. All rights reserved. Unathorized copying and distribtion is a violation of law.
INFORMATION REGARDING CONVERGENCE In the projection television, the image is formed by projecting 3 different color images (red, green and ble) onto the projection screen. Convergence refers to the alignment of red, green and ble images on the projection screen. When these images are properly aligned (converged), yo see a sharp and vibrant color image. Sometimes, the three images may reqire alignment. This is de to the effect of earth s magnetic field on the projection tbes. Normally, adjstment is not necessary after the initial alignment at the center of the screen. It is possible to correct the color fringing on other areas of the screen by sing the bttons on the remote control and by following the on-screen instrctions in the set-p men. Please converge the images before sing the television for the first time. The following diagram shows examples of a misaligned image and a properly aligned image. Please refer to pages 35-36 for detailed procedre on how to adjst convergence. Misconverged image Properly aligned image 1
TABLE OF CONTENTS Table of Contents Congratlations... 3 Cstomer Record... 3 Specifications... 3 Installation... 4 Television Location... 4 Optional Cable Connections... 4 AC Power Spply Cord... 4 Cable / Antenna Connection... 4 Care and Cleaning... 5 Featre Chart... 6 Ato Set Up Men... 7 Optional Eqipment Connections... 8 VCR... 8 Cable Box... 9 VCR and Cable Box... 9 Amplifier (TO AUDIO AMP)... 10 Front Control Panel... 10 Program Ot (PROG OUT)... 11 Digital TV - Set-Top Box (DTV-STB) or DVD Players... 11 Special Remote Bttons... 12 PIP and Split Operations... 13 Remote Control Operation (model PT-47WX42C)... 16 Mode Operational Key Chart...17 Programming the Remote... 19 Component Codes... 20 Remote Control Operation (models PT-47WX52C, PT-53WX52C and PT-56WX52C... 22 Mode Operational Key Chart...23 Programming the Remote... 25 Component Codes... 26 Roller Gide Men Navigation... 30 Roller Gide Icons... 32 Roller Gide Icon Mens... 32 Roller Gide Icon Men Operation... 33 Set Up... 33 Timer... 37 Pictre... 38 Channels... 39 Adio... 41 Lock... 42 V-Chip Men Operation... 43 Trobleshooting Chart... 49 Limited Warranty... 50 Index... 51 2
Congratlations CONGRATULATIONS Yor new Projection Television (PTV) featres state-of-the-art technology for high qality pictre and sond with complete adio/video connections for yor home theater system. Yor PTV is designed to give yo many years of enjoyment. It was thoroghly tested and tned at the factory for best performance. Cstomer Record The model and serial nmber of this prodct are located on the back of the PTV. Yo shold note the model and serial nmber in the space provided and retain as a permanent record of yor prchase. This will aid in identification in the event of theft or loss. Model Nmber Serial Nmber Specifications Power Sorce PT-47WX42C (4.2A) PT-47WX52C (4.2A) PT-53WX52C (4.2A) PT-56WX52C (4.2A) Channel Capability - 181 Video Inpt Jacks Adio Inpt Jacks Video Otpt Jack Adio Otpt Jacks Component Inpt (Y / P B / P R ) S-Video Inpt Jacks 120V AC, 60Hz VHF-12; UHF-56; Cable-113 1Vp-p, 75 Ohm, Phono Jack Type 500mV RMS 47K Ohm 1Vp-p, 75 Ohm, Phono Jack Type 0-2.0V RMS 4.7K Ohm 75 Ohm, Phono Jack Type S-Video (Y-C) Connector Specifications are sbject to change withot notice or obligation 3
INSTALLATION Installation Television Location This nit can be sed as an entertainment center. Conslt yor dealer for available options. Avoid excessive snlight or bright lights, inclding reflections. Keep away from excessive heat or moistre. Inadeqate ventilation may case internal component failre. Florescent lighting may redce remote control transmitting range. Keep away from magnetic eqipment, inclding motors, fans and external speakers. Optional Cable Connections Shielded adio and video cables shold be sed between components. For best reslts: Use 75-ohm coaxial shielded cables. Use appropriate inpt and otpt connectors, that match yor component connectors. Avoid long cables to minimize interference. AC Power Spply Cord CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS. Cable / Antenna Connection For proper reception, either a cable or antenna connection is reqired. Cable Connection Connect the cable spplied by yor local cable company to ANT1 connection on back of television. Select cable mode and ANT1 in SET UP men nder Prog Chan (Program Channels). Note: A cable converter box may be reqired for proper reception. Check with yor local cable company for compatibility reqirements. Polarized plg Incoming Cable from Cable Company 75 Ohm VHF/UHF on back of PTV Antenna Connections For proper reception of VHF/UHF channels, an external antenna is reqired. For best reception an otdoor antenna is recommended. Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the Incoming Cable from Home Antenna SET UP men nder Prog Chan. Cable Preset Cable Mode is preset at the factory. Antenna sers mst change to TV Mode and ANT 1 in the Set Up men. 4
Care and Cleaning CARE AND CLEANING Projection Screen (For Models PT-47WX52C, PT-53WX52C and PT-56WX52C) Trn TV Off The projection screen is a high precision lens system which has a protective screen. The protective screen is flly washable with the following precations: Use a mild soap soltion or window cleaner and a clean cloth. DO NOT USE ABRASIVE CLEANERS. Do not se landry detergent or atomatic dishwasher soap. Do not se alcohol, ammonia, or petrolem based prodcts. Avoid excessive moistre and wipe dry. Prevent soltion from rnning into the receiver below. Avoid bmping or scraping the screen. Note: Do not spray any type of cleaning flid directly on the screen. Projection Screen (For Model PT-47WX42C) Trn TV Off The projection screen is a high precision lens system which does not attract dst. Occasionally dst with a feather dster or very soft brsh sing only p and down motions. Never rb across the screen sing a side to side motion. Clean infreqently with a very weak soltion of dishwashing soap sing a soft, lint-free clean cloth. DO NOT USE ABRASIVE CLEANERS. Do not se window or glass cleaner, landry detergent, atomatic dishwasher soap, or abrasive cleaners. Do not se alcohol, ammonia, or petrolem based prodcts. Avoid excessive moistre and wipe dry. Prevent soltion from rnning into the receiver below. Avoid bmping or scraping the screen. Protect the very fine grooves on the screen which transport the pictre. Note: Do not spray any type of cleaning flid directly on the screen. Cabinet and Remote Control For cabinets and remote control, se a soft cloth dampened with water or a mild detergent soltion. Avoid excessive moistre and wipe dry. Do not se benzene, thinner or other petrolem based prodcts. 5
FEATURE CHART Featre Chart MODELS PT-47WX42C PT-47WX52C PT-53WX52C PT-56WX52C AUDIO SPECIAL FEATURES A/V JACKS FEATURES MENU LANGUAGE ENG/SPAN/FR PROTECTIVE SCREEN 2 TUNER SPLIT 2 TUNER PIP VIDEO INPUT SKIP CLOSED CAPTIONING V-CHIP CAPABILITY DIGITAL SCAN RATE 1080i, 480p 1080i, 480p 1080i, 480p 1080i, 480p NTSC LINE - DOUBLER 480p 480p 480p 480p VIDEO NORM AUDIO NORM STEREO AI SOUND BASS/BALANCE/TREBLE SURROUND BBE A/V PROGRAM OUT A/V IN (REAR/FRONT) (3/1) (3/1) (3/1) (3/1) AUDIO OUT S-VHS INPUT (REAR/FRONT) 2/1 2/1 2/1 2/1 COMPONENT INPUT 2 2 2 2 IMPORTANT INFORMATION REGARDING THE USE OF VIDEO GAMES, COMPUTERS, OR OTHER FIXED IMAGE DISPLAYS. WARNING: The marking or retained image on the pictre tbe reslting from viewing fixed image is not an operating defect and as sch is not covered by Warranty. The projection television is designed to display constantly moving images on the screen. Continos viewing of stationary images sch as letterbox pictres on standard screen TVs (with top/bottom bars), non-expanded standard (4:3) pictres on wide screen TVs (with side bars shown on each side of an image), stock market report bars (ticker rnning at the bottom of the screen), video game patterns, fixed scoreboards, bright station logos, on-line (Internet) or repetitive compter style patterns shold be limited. The extended se of fixed image program material can case permanent pictre tbe damage, shown as a shadow image viewable on normal programs. This type of irreversible pictre tbe deterioration can be limited by performing the following steps: Limit the display of fixed image program material to no more than 15% of total viewing time per week. Trn the power off when not in se. 6
Ato Set Up Men AUTO SET UP MENU For yor convenience, Ato Set p men will be displayed on screen when the set is trned on for the first time. If needed, follow the mens and procedres for setting p the featres. IDIOMA/LANGUE - To change men langage to ENGLISH, SPANISH or FRENCH. AUTO SET UP IDIOMA/LANGUE MODE AUTO PROGRAM CONVERGENCE ENGLISH CABLE Press VOL to select English, Spanish or French. PRESS ACTION TO EXIT MODE - To select TV (antenna) or CABLE mode depending on the signal sorce. AUTO SET UP IDIOMA/LANGUE MODE AUTO PROGRAM CONVERGENCE ENGLISH CABLE Press VOL to select TV or CABLE. PRESS ACTION TO EXIT AUTO PROGRAM - To atomatically program all channels with a signal. AUTO SET UP IDIOMA/LANGUE MODE AUTO PROGRAM CONVERGENCE ENGLISH CABLE Press VOL to start Ato Programming. PRESS ACTION TO EXIT CONVERGENCE -To adjst the center convergence if needed. AUTO SET UP IDIOMA/LANGUE MODE AUTO PROGRAM CONVERGENCE ENGLISH CABLE Press VOL to display Convergence adjstment men. Note: Refer to page 35 for setting Convergence if needed. PRESS ACTION TO EXIT 7
OPTIONAL EQUIPMENT CONNECTIONS Optional Eqipment Connections VCR Connection Follow this diagram when connecting yor television to a VCR only.. VCR CONNECTIONS ON BACK OF THE PTV ANT OUT VIDEO OUT L AUDIO OUT R ANT IN Incoming Cable ANT 1 SPLIT OUT ANT 2 VIDEO Y P B P R L AUDIO R 1 2 COMPONENT VIDEO INPUTS INPUT 1 S- VIDEO INPUT INPUT 2 3 PROG OUT VIDEO L R Use either the S-Video or Video connection. TO AUDIO AMP CABLES NOT SUPPLIED Note: The remote control mst be programmed with spplied codes to operate the VCR. Viewing a television program Procedre 1. Select ANT1 in the SET UP men nder Prog Chan (Program Channels). 2. Tne the television to the channel yo want to view. Viewing a video Procedre Option A 1. Select ANT1 in the SET UP men nder Prog Chan. 2. Press the TV/VIDEO btton on the remote control to select the video inpt (VIDEO 1, VIDEO 2, etc.) connected to yor VCR. 3. Begin the video. Option B 1. Select ANT2 in the SET UP men nder Prog Chan. 2. Tne the television to Channel 3 or 4, depending on yor VCR. 3. Begin the video. Recording a television program Procedre Option A (Recording and viewing the same program) 1. Select ANT2 in the SET UP men nder Prog Chan. 2. Tne the television to Channel 3 or 4, depending on yor VCR. 3. Using the VCR, tne to the television program yo want to record. 4. Begin recording. Option B (Recording one program while viewing another program) 1. Select ANT1 in the SET UP men nder Prog Chan. 2. Press the TV/VIDEO btton on the remote control to select the video inpt (VIDEO 1, VIDEO 2, etc.) connected to yor VCR. 3. Using the VCR, tne to the television program yo want to record. 4. Begin recording. 5. Press the TV/VIDEO btton on the remote control to switch back to TV mode. 6. Tne the television to the program yo want to view. 8
Cable Box Connection Follow this diagram when connecting yor television to a cable box only. CONNECTIONS ON BACK OF THE PTV OPTIONAL EQUIPMENT CONNECTIONS CABLE BOX ANT IN INCOMING CABLE ANT 1 VIDEO Y P B P R S- VIDEO VIDEO ANT OUT CABLES NOT SUPPLIED SPLIT OUT ANT 2 L AUDIO R 1 2 COMPONENT VIDEO INPUTS INPUT 1 INPUT INPUT 2 3 PROG OUT L R TO AUDIO AMP Note: The remote control mst be programmed with spplied codes to operate the cable box. Viewing a premim (scrambled) cable channel Procedre 1. Select ANT2 in the SET UP men nder Prog Chan (Program Channels). 2. Tne the television to Channel 3. 3. Using the cable box, tne to the premim cable channel yo want to view. Note: To se special featres sch as Favorite Channels and Channel Captions, ANT1 mst be selected in the SET UP men nder Prog Chan. VCR and Cable Box Connection Follow this diagram when connecting yor television to both a VCR and a cable box. VCR VIDEO OUT L CONNECTIONS ON BACK OF THE PTV ANT IN AUDIO OUT R ANT OUT Incoming Cable ANT 1 VIDEO Y P B S- VIDEO P R VIDEO CABLE BOX ANT OUT SPLIT OUT ANT 2 L AUDIO R 1 2 COMPONENT VIDEO INPUTS INPUT 1 INPUT INPUT 2 3 PROG OUT L R TO AUDIO AMP ANT IN CABLES NOT SUPPLIED Note: The remote control mst be programmed with spplied codes to operate the VCR and cable box. Viewing a premim (scrambled) cable channel Procedre 1. Select ANT2 in the SET UP men nder Prog Chan (Program Channels). 2. Tne the television to Channel 3. 3. Using the cable box, tne to the premim cable channel yo want to view. Note: To se special featres sch as Favorite Channels and Channel Captions, ANT1 mst be selected in the SET UP men nder Prog Chan. 9
OPTIONAL EQUIPMENT CONNECTIONS VCR and Cable Box Connection (contd.) Recording a premim (scrambled) cable channel Procedre 1. Select ANT2 in the SET UP men nder Prog Chan. 2. Press the TV/VIDEO btton on the remote control to select the video inpt (VIDEO 1, VIDEO 2, etc.) connected to yor VCR. 3. Trn the VCR ON. 4. Tne the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR. 5. Using yor cable box, tne to the premim cable channel yo want to record. 6. Begin recording. Note: To view a different channel while recording: Select ANT1 in the SET UP men nder Prog Chan. Press the TV/VIDEO btton on the remote control to TV mode. Tne the television to a channel (except another premim cable channel). Amplifier Connection (TO AUDIO AMP) To listen throgh a separate stereo system, connect an external adio amplifier TO AUDIO AMP otpts on back of television. Note: TO AUDIO AMP terminals cannot be connected directly to external speakers. Adio Adjstments 1. Select SPEAKERS ON located in the onscreen AUDIO men. 2. Set amplifier volme to minimm. 3. Adjst television volme to desired level. 4. Adjst amplifier volme to match the television. 5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO men. 6. Volme, mte, bass, treble and balance are now controlled throgh the television. Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control adio fnctions throgh the external amplifier. CONNECTIONS ON BACK OF TV VIDEO Y CABLES NOT SUPPLIED ANT 1 P B S- VIDEO External Amplifier P R VIDEO L L SPLIT OUT ANT 2 AUDIO R 1 2 COMPONENT VIDEO INPUTS INPUT 1 INPUT INPUT 2 3 PROG OUT R TO AUDIO AMP Front Control Panel The front control panel can be sed to access mens and switch video mode when the remote control is not available. ON/OFF INDICATOR Note: The ON/OFF indicator LED (red) will be lit when set is on. POWER t VOLUME q CHANNEL p ACTION TV/VIDEO S-VIDEO VIDEO4 L-AUDIO-R CAMCORDER POWER ON/OFF Note: The S-VIDEO connection provides higher qality pictre. It overrides VIDEO 4 connections. Use INPUT 4, AUDIO L and R with S-VIDEO connection. A second VCR, Camcorder, a video disc player, video game eqipment or DSS eqipment can also be connected to the video inpts. See the optional eqipment manal for details. Procedre 1. Connect eqipment to front Adio/Video inpt jacks. 2. Press TV/VIDEO btton to select VIDEO 4 inpt mode. 3. Operate optional eqipment as instrcted in eqipment manal. 10
Program Ot Connection (PROG OUT) OPTIONAL EQUIPMENT CONNECTIONS To se the television adio and video with optional eqipment, connect the PROG OUT and TO AUDIO AMP connections on the back of the television. CONNECTIONS ON BACK OF TV VIDEO ANT 1 Y P B P R S- VIDEO VIDEO CABLES NOT SUPPLIED MONITOR VCR SPLIT OUT ANT 2 L AUDIO R 1 2 COMPONENT VIDEO INPUTS INPUT 1 INPUT INPUT 2 3 PROG OUT L R TO AUDIO AMP OR Procedre 1. Connect optional eqipment to PROG OUT and TO AUDIO AMP terminals. 2. PROG OUT terminal display is the same as onscreen display. 3. See optional eqipment manal for frther instrctions for recording and monitoring. Digital TV - Set-Top Box (DTV-STB) or DVD Connection This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tner set-top-box (STB). In order to view DTV programming, the STB mst be connected to the component video inpts (Y, P B, P R ) of the television. A DTV signal mst be available in yor area. Select the otpt of the STB to either 1080i or 480p. This television also tilizes a progressive scan dobler, which de-interlaces the NTSC signal and progressively scans the image. This allows yo to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated with interlaced TV pictres. Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of yor TV. TERMINALS ON BACK OF DTV-STB OR DVD PLAYER DTV INPUT TERMINALS ON BACK OF TV CABLES NOT SUPPLIED L-AUDIO-R DIGITAL TV OUTPUT MAIN VIDEO Y P B P R ANT 1 VIDEO Y P B S- VIDEO R-AUDIO-L -VIDEO S-VIDEO NTSC OUTPUT P R L VIDEO L SPLIT OUT ANT 2 AUDIO R 1 2 COMPONENT VIDEO INPUTS INPUT 1 INPUT INPUT 2 3 PROG OUT R TO AUDIO AMP Note: There are 2 sets of three video inpts, Y, P B, and P R. Separate component color inpts provide lminance and color separation. Use the L (left) and R (right) adio inpts. 11
SPECIAL REMOTE BUTTONS Special Remote Bttons ASPECT Btton Cstomer Options depending on Component Inpt Signal INPUT SIGNAL DISPLAY ON SCREEN ASPECT BUTTON OPTIONS 1080i 16:9 only no options 480p (16:9) Defalt to 16:9 4:3, Fll or Zoom (see below) 480p (4:3) Defalt to FULL mode Note: Will stretch pictre horizontally 4:3, Fll or Zoom (see below) 480i Defalt to JUST mode 4:3, Fll, Jst or Zoom (see below) The ASPECT btton on the remote control lets yo choose one of for display modes, depending on the format of the received signal and yor preferences. Inpt Signal ASPECT Image on 16:9 Screen Size Explanation 480i or 480p 4:3 4 3 This will display a 4:3 pictre at its standard 4:3 size with gray side bars. (Not recommended for viewing 4:3 pictres, may case a permanent image on screen if displayed for a prolonged period of time.) 480i or 480p ZOOM 16 9 This will expand the 4:3 pictre niformly (width and height) to fll screen width and then reposition the pictre vertically. (Recommended for letterbox pictres.) 480i or 480p FULL 16 9 This will show pictre at fll screen size. (Recommended for anamorphic pictres.) 480i JUST 16 9 This will stretch the right and left edges of a 4:3 pictre to fill the screen. The center of the screen will have aspect correction applied. The size of the pictre will depend on the original signal. (Recommended for reglar TV viewing.) BBE Btton Press this btton to trn the BBE sond featre On or Off. BBE Sond technology enhances speech intelligibility and restores the dynamic range of msical passages to provide otstanding natral sond. SAP Btton Press this btton to let yo cycle throgh different adio modes. If yo are receiving a stereo program and yo press the SAP btton, yo can cycle between STEREO and MONO. 12
PIP and Split Operation Note: The shapes of PIP and SPLIT fnction bttons may vary depending on the remote control. PIP Operation Split Operation PIP Frame This featre lets yo watch two different channels side by side with or withot an external video sorce. PIP AND SPLIT OPERATION This television incldes a two-tner Pictre In Pictre (PIP) featre. This allows yo to watch two (2) live broadcasts at the same time with or withot an external video sorce sch as a VCR, cable box, etc. Connect incoming cable to ANT 1 inpt on back of TV PIP Press to display PIP frame. Main Pictre PIP CH Note: Adio is from Main Pictre only. Split Pictre no Adio Select channels for the PIP frame by pressing. Select channels for the Main pictre by pressing or CH or se the remote control nmeric keypad. SWAP Press to switch the PIP and MAIN PICTURE sorce. RECALL Press to view pictre sorce stats. PIP Press to cancel PIP frame. SPLIT Press to display Split screen. Select channels for the Split screen by pressing. PIP CH CH Main Pictre with Adio Note: Adio is from Main Pictre only. Select channels for the Main pictre by pressing or or se the remote control nmeric keypad. CH SWAP Press to switch the SPLIT SCREEN and MAIN PICTURE sorce. RECALL Press to view pictre sorce stats. SPLIT Press to cancel Split screen. CH PIP and Split Operation With a Cable Box To view premim (scrambled) cable channels throgh yor cable box in the Main Pictre: Note: Use this procedre if yo want to watch premim cable channels in the Main Pictre while viewing a television program or video in the PIP or Split frame. Procedre Select ANT 2 in the SET UP men nder Prog Chan (Program Channels). Tne PTV to Channel 3. PIP SPLIT Press or on the remote control to display the PIP or Split frame. Note: Adio is from the Main Pictre only. Verify the Cable box is ON. Choose channels for the Main Pictre by tning the cable box. PIP Choose channels for the PIP or Split frame by pressing. Note: CH Swap is not available when sing the cable box to tne channels. If yor cable box has video otpt, it can be connected to the PTV to allow yo to se all PIP or Split fnctions. See the eqipment manal for more information. 13
PIP AND SPLIT OPERATION PIP and Split Operation (contd.) Note: The shapes of PIP and SPLIT fnction bttons may vary depending on the remote control. TV/VIDEO Btton Press when PIP or Split frame is displayed to select desired inpt mode. CH # COMPONENT 1 COMPONENT 2 VIDEO 1 Main Pictre VIDEO 4 VIDEO 3 VIDEO 2 PIP Frame CH # COMPONENT 1 COMPONENT 2 VIDEO 1 Main Pictre VIDEO 4 VIDEO 3 VIDEO 2 Split Frame Search Btton (PIP and Split) This featre lets yo scan throgh all available channels. Main Pictre 2 3 4 Search Frames PIP SPLIT Press or to display PIP or Split frame. SEARCH OPEN/CLOSE p Press to display search frames. SEARCH OPEN/CLOSE p Press again to stop search featre. PIP or Split frame channel will be the last active search frame. PIP SPLIT Press or to cancel PIP or Split frame. Move Btton (PIP only) This featre is sed to move PIP frame to one of for corners. Main Pictre PIP Frame PIP Press to display PIP frame. MOVE Press to position PIP frame to desired corner. PIP Press to cancel PIP frame. PIP MIN and PIP MAX Bttons While PIP frame is displayed, press PIP MIN or PIP MAX btton to vary the size of PIP frame. Main Pictre MIN MAX PIP Press to display PIP frame. PIP MIN PIP MAX Press or to size PIP frame. PIP Press to cancel PIP frame. 14
PIP and Split Operation (contd.) Note: The shapes of PIP and SPLIT fnction bttons may vary depending on the remote control. Freeze Btton (PIP and Split) This featre is sed to stop action in PIP or Split frame. PIP AND SPLIT OPERATION PIP SPLIT Press or to display PIP or Split frame. Main Pictre FREEZE Press TV/VCR to stop PIP or Split frame action. Freeze frame FREEZE TV/VCR Press again to contine action. PIP SPLIT Press or to cancel PIP frame. Main Pictre Freeze Featre This featre is sed to stop action of the Main Pictre and display it on a Split or PIP freeze frame. Main Pictre Main Pictre Freeze frame PIP or Split. To stop action for Main pictre, press while PIP or Split frame is not displayed. Main Pictre freeze will be displayed in a PIP or Split frame, depending on the selection in the Freeze men located in Pictre Other ADJ2 section (refer to page 33). FREEZE TV/VCR FREEZE TV/VCR Press again to cancel Main Pictre freeze frame. Note: While Main Pictre freeze frame is displayed, only move btton is active for PIP, all other PIP and Split bttons has no effect (see chart below). PIP, Split and Freeze Mode Bttons Operational Chart This chart indicates the bttons that are operational with PIP, Split or Main Pictre Freeze mode. REMOTE BUTTONS PIP MODE SPLIT MODE PIP MIN Size Smaller No Effect No Effect PIP MAX Size Larger No Effect No Effect MAIN PICTURE FREEZE MODE FREEZE Freeze PIP Frame Freeze Split Frame Display or Delete PIP CH Change Channel Change Channel No Effect SEARCH Displays Search Frames Displays Search Frames No Effect PIP Displays PIP Frame Displays PIP Frame No Effect SPLIT Displays Split Frame Displays Split Frame No Effect MOVE Move PIP Frame No Effect Move PIP Frame SWAP Swap With Main Pictre Swap With Main Pictre No Effect 15
REMOTE CONTROL OPERATION (MODEL PT-47WX42C) Remote Control Operation (model PT-47WX42C) POWER Press to trn ON and OFF. SAP Press to access second adio program. MUTE VOL VOL Press to mte sond. Press to display and cancel CC (Closed Caption). Press to adjst TV sond and navigate in mens. TV VCR DBS/CBL DVD CH CH Press to select remote operation. ACTION Press to access mens. TV/VIDEO Press to select TV or inpt modes. BBE MENU Press to select next or previos channel and navigate in mens. DBS fnctions btton. RECALL Press to display time, channel, sleep timer, and other options. EXIT SEARCH GUIDE BBE - Press to trn on or off. MENU- Press to access DBS or DVD mens. SEARCH - Press for PIP or SPLIT search. GUIDE - DBS fnctions btton. 1 2 4 5 7 8 0 3 6 9 ASPECT PROG ASPECT - Select pictre size (ratio) to match programming format. PROG - Press to enter minor nmber in a compond nmber. Press nmeric keypad to select any channel. *PIP MIN REW *SPLIT PLAY *PIP MAX FF R-TUNE Press to switch to previosly viewed channel or inpt modes. EUR7613Z40 *SWAP PAUSE *FREEZE TV/VCR *MOVE STOP *PIP CH VCR /DBS CH *PIP REC Battery Installation Use two AA batteries: Remove battery cover by pshing in and p near arrow. Install batteries matching (+) and (-) polarity signs. Replace the battery cover. Note: Incorrect installation can case battery leakage and corrosion that will damage the Remote Control *Split and PIP fnction bttons Component fnction bttons Precations Replace batteries in pairs. Do not mix battery types (zinc carbon with alkaline). Do not recharge, heat, short-circit, disassemble, or brn batteries. 16
REMOTE CONTROL OPERATION (MODEL PT-47WX42C) Mode Operational Key Chart This chart defines the keys that are operational in the selected component modes (TV, VCR, DBS, CABLE or DVD) after programming (if needed). KEY NAME TV MODE CABLE MODE DBS MODE POWER POWER POWER POWER SAP SAP ON/OFF - - MUTE MUTE TV MUTE TV MUTE TV/VIDEO INPUT SWITCH TV INPUT SWITCH TV INPUT SWITCH BBE/MENU BBE ON/OFF - DBS MENU CHAN p CHANNEL UP CABLE CHANNEL UP DBS NAVIGATION UP CHAN q CHANNEL DOWN CABLE CHANNEL DOWN DBS NAVIGATION DOWN VOL VOL + TV VOL + DBS NAVIGATION RIGHT t VOL VOL - TV VOL - DBS NAVIGATION LEFT ACTION ACTION - DBS MENU RECALL DISPLAY TV DISPLAY DBS PROG. INFO EXIT - - DBS EXIT SEARCH/GUIDE TV PIP/SPLIT SEARCH - DBS GUIDE 1 DIGIT 1 DIGIT 1 DIGIT 1 2 DIGIT 2 DIGIT 2 DIGIT 2 3 DIGIT 3 DIGIT 3 DIGIT 3 4 DIGIT 4 DIGIT 4 DIGIT 4 5 DIGIT 5 DIGIT 5 DIGIT 5 6 DIGIT 6 DIGIT 6 DIGIT 6 7 DIGIT 7 DIGIT 7 DIGIT 7 8 DIGIT 8 DIGIT 8 DIGIT 8 9 DIGIT 9 DIGIT 9 DIGIT 9 0 DIGIT 0 DIGIT 0 DIGIT 0 R-TUNE ASPECT PROG PIP MIN <<REW SPLIT PLAY PIP MAX FF >> SWAP PAUSE MOVE STOP PIP RECORD FREEZE TV/VCR PIP CH VCR/DBS CH PIP CH VCR/DBS CH PREVIOUS CHAN OR VIDEO MODE CABLE PREVIOUS CHANNEL PREVIOUS DBS CHANNEL TV ASPECT - DBS PROGRAM/DASH PIP MIN - - SPLIT ON / OFF - - PIP MAX - - SWAP PIP OR SPLIT WITH MAIN PICTURE - - MOVE PIP - - PIP ON / OFF - - TV PIP FREEZE - - PIP OR SPLIT CHAN q - DBS CHANNEL DOWN PIP OR SPLIT CHAN p - DBS CHANNEL UP 17
REMOTE CONTROL OPERATION (MODEL PT-47WX42C) Mode Operational Key Chart (contd.) KEY NAME VCR MODE DVD MODE POWER POWER POWER SAP - - MUTE TV MUTE TV MUTE TV/VIDEO TV INPUT SWITCH TV INPUT SWITCH BBE/MENU - - CH p - NEXT CHAPTER CH q - PREVIOUS CHAPTER VOL TV VOLUME + NAVIGATION RIGHT t VOL TV VOLUME - NAVIGATION LEFT ACTION - - RECALL ONSCREEN VCR DISPLAY DVD DISPLAY EXIT - - SEARCH/GUIDE - - 1 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 0 - - R-TUNE - - ASPECT PROG - - PIP MIN <<REW VCR REWIND SKIP SEARCH REW << SPLIT PLAY VCR PLAY DVD PLAY PIP MAX FF>> VCR FF SKIP SEARCH FF>> SWAP PAUSE VCR PAUSE DVD STILL MOVE STOP VCR STOP DVD STOP PIP RECORD VCR RECORD - FREEZE TV/VCR TV/VCR SWITCH OPEN/CLOSE PIP CH VCR/DBS CH PIP CH VCR/DBS CH VCR CHANNEL DOWN SLOW - VCR CHANNEL UP SLOW + 18