Ecole Centrale Paris Laboratoire Génie Industriel Séminaire des doctorants de 1 ère année de l équipe 2 Année universitaire 2012-2013 28 Novembre 2012
Mini CV Yuanyuan CHEN est née le 23/04/1987 à Weifang en Chine. 2005-2009, Bachelor of Science, Industrial Engineering, Northwestern Polytechnical University (China) 2009-2010, Master of Management, Management Science and Engineering, Northwestern Polytechnical University (China) 2010-2011, Master recherche, Optimisation des Systèmes Industriels et Logistiques, ECP (France) 2011-now, PhD candidate, Supply Chain Management, ECP (France) Résumé (Abstract) Scheduling is an important tool for manufacturing and engineering, where it can have a major impact on the productivity of a process. As a part of scheduling problem, resource-constrained project scheduling problem (RCPSP) is to study the reasonable utilization of resource and scheduling of project activities to optimize certain objectives, which is of strong engineering background, and has gained wide research in both academic and industrial fields. Literature works on RCPSP have been summarized, and existent algorithms have been surveyed. The paper will develop a more efficient method to get the optimum solution of given problem based on some general approaches and a comparison between algorithms will be done. Mots-clés Project scheduling, Resource constrained, Branch and cut Yuanyuan CHEN Cadre : Doctorante CSC Laboratoire Génie Industriel, Ecole Centrale Paris Grande Voie des Vignes, 92295 Châtenay-Malabry, France. Téléphone : 01 41 13 11 66 E-mail :yuanyuan.chen@ecp.fr Directeur de thèse Chengbin CHU Début de thèse 10/2011
Contexte et Problématique Scheduling is concerned with the allocation of scarce resources to activities with the objective of optimizing one or more performance measures(joseph, 2004). In this situation, resources and activities can take on many different forms. Scheduling is an important tool for manufacturing and engineering, where it can have a major impact on the productivity of a process. If we assume that resources are machines in a manufacturing workshop, and activities are various operations in the manufacturing process, then it is the production scheduling which plays a principle role in the competition between manufacturing enterprises. The studies dealing with this sort of problems are abundant and the values of these researches are significant. Or it can also be project scheduling which is an important task in project management. The presence of scarce resources as well as precedence relations between activities makes project scheduling a difficult task (Hartmann and Briskorn, 2010). And project scheduling has attracted an ever growing attention in recent years both from science and practice. The models in this area are rich in the sense that many well-known optimization problems are special cases of the more general project scheduling models (Brucker et al., 1999). For instance, job shop scheduling problem, a typical production scheduling problem, is a special case of the resource-constrained project scheduling problem. The RCPSP has been proved belongs to the class of the strongly NP-hard problems (Blazewicz et al., 1983). The problem we get can be summarized as follows: there are N jobs which are labeled i = 1, 2, and the job needs processes; we have M renewable resources labeled m= and the quantity of the resource is labeled ; Each process needs certain amounts of resources to be performed, we use as the kinds of resources used by process of job i, signed as precess(i,j) for short; represents the resource of process(i,j); in addition, the sequence of processes is given when they use the same resource synchronously and the quantity is insufficient. According to the description, our problem has similarities with the classic resourceconstrained project scheduling problem (RCPSP) which has became a standard problem for project scheduling in the literature. Objectif de la recherche This work aims to summarize the literature works on resource constraints project scheduling problems and develop a more efficient method to get the optimum solution of given problem based on some general approaches such as branch and bound, cutting plane, etc. Méthodologie de recherche Optimization theory; Mathematical programming; Branch and cut algorithm; Branch and bound algorithm; Cutting plane algorithm; Heuristic algorithm;
Avancées & perspectives In the previous works, I have analyze the given problem and match it to the well known resource-constraints project scheduling problem in order to solve this problem more efficiently based on the existent algorithms and develop a new method for solving this kind of problem. Several different algorithms have been surveyed. In the future research, a heuristic approach will be used first to solve the given problem, and base on this solution, an exact algorithm will be found to get the optimum result. And then, a comparison will be done between the new exact algorithm and the existent algorithm by using the data of Project Scheduling Problem (PSPLIB). And those steps will repeat until a more efficient approach is found. Bibliographie BLAZEWICZ, J., LENSTRA, J. K. & KAN, A. H. G. R. (1983) Scheduling subject to resource constraints: classification and complexity. Discrete Applied Mathematics, 5, 11-24. BRUCKER, P., DREXL, A., MOHRING, R., NEUMANN, K. & PESCH, E. (1999) Resource-constrained project scheduling: Notation, classification, models, and methods. European Journal of Operational Research, 112, 3-41. DEMEULEMEESTER, E. L. & HERROELEN, W. S. (1996) An efficient optimal solution procedure for the preemptive resource-constrained project scheduling problem. European Journal of Operational Research, 90, 334-348. HARTMANN, S. N. & BRISKORN, D. (2010) A survey of variants and extensions of the resourceconstrained project scheduling problem. European Journal of Operational Research, 207, 1-14. JOSEPH, L. (2004) Introduction and Notation. Handbook of Scheduling. Chapman and Hall/CRC.
Mini CV Zhaofu HONG was born in 1984 in China. He received his B.S. degree in Mechanical Engineering from Lanzhou University of Technology, Lanzhou P.R.China in 2006. Then in 2009 he obtained the M.S. degree in Enterprise Management from Lanzhou University, P.R.China. He is at present working towards the Ph.D. degree Industrial Engineering at Lanzhou University. He is taking his joint PhD program in Industrial Engineering at Ecole Centrale Paris, France since 10 October 2012. His current research interests include production optimization and supply chain configuration considering environmental issues. Résumé (Abstract) We consider the carbon emission and focus on the optimization of production planning and regulation policy for the manufacturer and government. The manufacturer provides an emission-dependent product to satisfy a customer demand with green preference. The government makes an emission regulation policy with an objective of maximizing the society utility including both the environment and economy. He not only assigns the emission allowance for the manufacturer in a production planning horizon, but also limits the production with an emission cap for each production period. There is a Stackelberg game between the decisions of the government and manufacturer, and the equilibrium solution exists when they pursuit their optimal decisions. Mots-clés Carbon Emission, Production Planning, Regulation policy, Optimization Zhaofu HONG Cadre : Contrat (Cotutelle) Laboratoire Génie Industriel, Ecole Centrale Paris Grande Voie des Vignes, 92295 Châtenay-Malabry, France. Téléphone : 01 41 13 18 15 E-mail : zhaofu.hong@ecp.fr Directeur de thèse Chengbing CHU Co-encadrant de thèse Yugang YU Début de thèse Mois/Année 10/2011
Contexte et Problématique Carbon emission issues have received worldwide attention in recent years, but research in operations management (OM) and operations research (OR) has been almost absent from the efforts optimizing operational decisions. We consider the carbon emission and focus on the optimization of production planning and regulation policy for the manufacturer and government with some operation research approaches. Objectif de la recherche In this research, we try to help the manufacturers to make their optimal decisions on production planning, technology selection and product pricing under the emission constraints; and the government to make emission regulation policy to protect the environment as well as promote the economy. Méthodologie de recherche Linear programming formulation Mixed integer linear programming formulation Dynamic programming Game theory Avancées & perspectives The most important and difficult of this work is the part of optimal production planning of the manufacturer since we have to formulate some MILP model and try to solve them in polynomial time. We have finished some work for the first part. The coming work is the research for the decisions between the government and manufacturer.
Mini CV Siham Lakri est née le 31 mars 1986 à Paris. de 2 ème st suite à son stage année effectué au Japon chez Valeo, Recherche Modélisation et Management de la - diplômée en 2011, elle entreprend en janvier 2012 une thèse intitulée Mesure et Animation de la Performance de la Supply chain, au sein de la Chaire Supply chain du Laboratoire Génie Industriel de Centrale Paris. Cette thèse est en collaboration avec cinq grands groupes français, partenaires de la Chaire: Carrefour, Danone, PSA, Louis Vuitton et Vallourec. Résumé (Abstract) imprévisible dans lequel baigne la supply chain (SC), pousse ses acteurs à se demander comment en améliorer la performance globale Siham Lakri Cadre : Chaire Supply chain Laboratoire Génie Industriel, Ecole Centrale Paris Grande Voie des Vignes, 92295 Châtenay- Malabry, France. Téléphone : 01 41 13 18 08 E-mail : siham.lakri@ecp.fr Directeur de thèse Jean-Claude Bocquet Co-encadrants de thèse Yves Dallery Zied Jemai Début de thèse Janvier 2012 considérée comme un système complexe (réf). experts est celle de Performance de la SC». Elle constituera le point de départ de cette thèse. Dans un sur les notions de performance, d,. Ensuite, une étude benchmark sur le sujet a Actuellement, les travaux de recherche se concentrent sur une modélisation systémique qui devrait permettre de positionner plus précisément la suite de cette recherche. Mots-clés SC, performance, kpi, pilotage, approche systémique, création de valeurs
Contexte et Problématique Contexte «poussé- à un mode «tiré-piloté par le client», une SC bien piloté devient la seule (Krebs, 2010) 1. La mutation de la logistique vers la supply chain (SC) e mode, ou du moins pas uniquement, mais bie SC globale, plus réactive et plus flexible aux incontournables aléas de la demande et du marché, les entreprises réussissent à tenir «debout». La SC se situe au de l'activité des organisations, elle interagit avec de des fournisseurs, le marketing, l'administration des ventes, la pr (Baglin et al., 2005) 2 s clients, de La SC à la capacité soient leurs marchés, un enjeu crucial pour les entreprises industrielles et commerciales. SC conditionne». Problématique Comme nous avons pu le constater précédemment, la SC pourquoi les compagnies se concentrent sur la performance de leur SC. Pour améliorer il faut agir, prendre des décisions. Mais à quels niveaux de la chaîne? Sur quels composants (les organisations, les processus )? Et à quel moment opportun, face On conçoit assez aisément que l mesure de la performance de la SC. La mesure permet possible et de suivre des perpétuel mouvance et ce en tout état de cause. La problématique de ce travail de recherche repose donc sur le système de erformance de la SC», sa Il est bon de préciser que le travail de recherche entrepris ne vise en aucun cas à répertorier les bonnes pratiques à mettre en place pour rendre une SC plus performante (exemple : expliquer en quoi des plateformes «Crossdocking» seraient un mode d'organisation des flux logistiques à privilégier, permettant d'articuler et de croiser les flux en un endroit pour améliorer la distribution). En effet, le système à considérer est pas celui de la SC elle-même, mais bien celui de la mation de la performance de la SC. Cependant, de même que la SC est un système dynamique, le système de la mesure et éployé (KPIs entre autres) doit nécessairement évoluer pour rester pertinent et continuer de r de la SC la plus proche possible de la réalité. Il en va de même pour et qui est provoqué par SC. 1 «Le livre blanc de la supply chain», Axsolu Boot Camp, Bénédicte Krebs (septembre 2010) - http://www.axsolu.fr 2 Baglin, G., Bruel, O., Garreau, A., Greif de la Supply Chain, 4e édition. ed. Economica.
Objectif de la recherche Choix du terrain de recherche mation de la performance de la SC temps en tout cas, de ne pas restreindre cette recherche à une structure de SC donnée ou à un environnem de la performance de la SC de toutes les entreprises peu importe leur domaine et leur organisation a priori. Ceci dit, sur les référentiels des entreprises partenaires externes afin Finalité de la recherche Ce travail de recherche vise à éclaircir les besoins auxquels le système de la mesure et de SC point de vue systémique, on assure une démarche holistique. Car en effet, le challenge des SC repose en grande partie sur la capacité à tenir com réussissent, on pense favoriser la connaissance et la compréhension des enjeux auxquels il doit f imation pertinent pour améliorer les SC avec une image de la réalité (ou du moins très proche) entre les mains des acteurs de la SC, il y a lieu de penser que les actions Méthodologie de recherche érale. Bien entendu cette veille continue en parallèle sur deux voies : - une démarche systémique centrée performance de la SC. Cette approche holistique devrait offrir une vue composants, des interactions et des flux du système considéré, et ainsi aider à orienter plus précisément la suite des travaux - des demientreprises et autres experts en terrain». Avancées & perspectives Travaux effectués Travaux en cours Travaux en perspectives - Notions : performance, indicateur, méthode systémique, création de valeur /Partenaire - Taux de service livraison Etude benchmark - Mesure et Animation Modélisation systémique - Système considéré : Mesure et animation de la performance SC - Phases/partie prenantes/ attentes/livrables Analyse de la modélisation systémique obtenue Etude du processus S&OP
Incorporating Fairness concern into supply chain Mini CV Tengfei NIE est né(e) le 24/03/1986 à Anhui en Chine. Education : 2004,09-2008,07 :Anhui Polytechnic University, Management School ; 2008,09-2011,10 : Univesity of Science and Technology of China, Management School ; 2011,11- present : Ecole Central Paris, LGI Research interests : Behavioral Operations Management(mainly about fairness concern in supply chain), Game Theory and Optimization Problem Résumé (Abstract) The social preferences, such as fairness concern, reciprocity, are ignored by traditional economic theory for a long time. However, more and more behavioral and psychological experiments show that the existence of these preferences will lead to decision-makers deviating the traditinal opitmal decision. Therefore, it is necessary to incorporate these preferences into supply chain to figure out its influence and then design more practicable contracts to coordinate the supply chain and increase its efficiency. My thesis involves and attempt to answer the following three important questions : (1) Will the solutions of Nash bargaining game be th members fairness benchmarks in the supply chain and if it is true, how do they affect the decisions of the supplier and the retailer? (2) will the people s intention affect the members decisions and channel s coordination? (3) how does the fairness affect the decision when one supplier deals with two or more retailers? Mots-clés : Supply Chain, Fairness Concern, Stackelberg Game, Psychological Nash Equilibrium Tengfei NIE Cadre : Contrat (Co-tutelle) Laboratoire Génie Industriel, Ecole Centrale Paris Grande Voie des Vignes, 92295 Châtenay-Malabry, France. Téléphone : 01 41 13 18 10 E-mail : tengfei.nie@ecp.fr Directeur de thèse Chengbin CHU Co-encadrant de thèse Liang Liang(Professor of Management School, University of Science and Technology of China) Début de thèse 09/2010
Contexte et Problématique Traditional econocomics theory assume that people are rational and their only goal is to maximize their own profits. However, numerous behavioral experiments and empirical studies lately confirm the existence of these behavioral preferences, one of the most important findings is that the real decision always deviates from the conclusions that derived from traditional normative theories. It has been widely accepted that the root of this systematic bias is that the traditional normative research neglects the influence of people's behavior. Thus, it is very necessary to consider behavioral preferences in order to explain the real process of economic decisions. My PhD thesis will focous on peopl s social preprefences and their influece on the decision under the background of supply chain. Objectif de la recherche The main goal is to figure out how do the social preferences affect the players decisions after incorporating peopl s social preprefences(such as fairness concern, reciprocity) into the supply chain. Méthodologie de recherche Game Theory Operations Research Optimality Theory8 Bayesian Decision Theory Avancées & perspectives My PhD thesis will include the following three topics : (1) Research on Wholesale Price Contract Regarding Nash Bargaining Solutions as Fairness Benchmark ; (2) Reciprocal supply chain considering intention impact ; (3) Incorporating peer-induced fairness into the supply chain. Until now, I have finished the first topic and the second one is what I am studying, the last one is my possible future topic.
Mini CV Wim van Ackooij est né le 12 juin 1979 à La Haye au Paysson MsC en «Technische Wiskunde» à installé en France en 2003. Salarié de la il avec des applications en Management XI. Résumé (Abstract) Le travail de thèse porte sur la programmation sous contrainte probabiliste. Sur un plan technique sont considérés la continuité et la différentiabilité de la sous contrainte en probabilité. Wim van Ackooij Cadre : EDF R&D Département OSIRIS 1 Avenue du Général de Gaulle, 92141 Clamart, France Téléphone : 01 47 65 58 31 E-mail : wim.van-ackooij@edf.fr Directeurs de thèse M. Minoux R. Henrion Début de thèse 02/2012 en compte les incertitudes. Mots-clés Robust Optimization, Chance Constrained Programming, Unit-Commitment, Decomposition Methods, Bundle Methods
Contexte et Problématique Le problème dit de «Unit-Commitment» consiste à trouver un planning de production à coût minimal qui satisfasse la demande en énergie des clients et des services systèmes. Sa principale difficulté vient de la modélisation extrêmement détaillée du parc de production contenant les centrales thermiques, nucléaires et hydrauliques. Cette modélisation tente de représenter aussi finement que possible la réalité, afin que le planning «optimal» de et sa non-convexité rendent le problème difficile à résoudre. EDF dispose néanmoins d'un outil industriel de résolution du problème, dont la mise en place progressive a su profiter, au fil du temps, des avancées théoriques dans le domaine de la programmation mathématique. Or, le modèle actuel considère un monde entièrement déterministe. En pratique, afin de faire face aux aléas, un processus opérationnel supplémentaire a été mis en place et consiste en la -journalier. Il convient alors pouvons alors parler de planning «robuste» au sens où il doit permettre de s'adapter plus facilement aux réalisations observées i «robuste». e nombreuses questions sur le plan théorique restent en suspend telles la convexité du domaine admissible, la différentiabilité des contraintes, la stabilité de la solution et la résolution efficace des problèmes robustes. Objectif de la recherche icultés théoriques et pratiques mentionnées cidessus pour certaines classes de problèmes. des approches robustes. Méthodologie de recherche Une formulation réaliste du problème de «Unit-Commitment» (voir [1]) avec contraintes probabilistes (s) jointe(s) en probabilité (ce sont des systèmes linéaires avec incertitudes sur les coefficients). Dans sa plus grande généralité, nous aurons donc des systèmes avec à la fois le membre droit aléatoire mais aussi la matrice aléatoire. Puisque le modèle actuel est déterministe, savoir résoudre le problème avec le membre droit aléatoire seul sera déjà une grande avancée. Pour le problème de «Unit Commitment», il ne s'agit pas d'une restriction abusive, car elle permet de prendre de systèmes de production intermittente (éolien, solaire). La méthodologie consiste donc dans le traitement des difficultés une-à-une. Elles seront investiguées de manière isolée. Une fois sera mise en place pour palier à une difficulté particulière, cette difficulté sera réintég
Avancées & perspectives hydraulique, nous pouvons développer des approches pour le calcul efficace de gradients (voir [2]). Des systèmes hydrauliques plus complets peuvent ensuite être considérés et résolus de façon efficace (voir [3,4]). Même si les questions de convexité restent en suspend pour le cas de systèmes linéaires avec matrice soumis à incertitude, des formules de gradients peuvent être développées [5]. Enfin, le problème de «Robust Unit-Commitment» global peut être Les perspectives sont : Extension des résultats de convexité pour les problèmes probabilité Extension des résultats pour le calcul efficace des gradients de contraintes en probabilité Considération de problèmes de «Robust Unit-Commitment» avec des modèles plus réaliste en ce qui concerne la production thermique (e.g. [10]) recours» sur le problème de Unit-Commitment Robuste. Bibliographie [1] W. van Ackooij, René Henrion, Andris Möller and Riadh Zorgati ; Chance Constrained Programming and Its Applications to Energy Management ; Chapter in Stochastic Optimization - Seeing the Optimal for the Uncertain (Eds. Ioannis Dritsas) ; INTECH open acces published ; pages 291-320 ; ISBN 978-953-307-829-8 [2] W. van Ackooij, R. Henrion, A. Möller and R. Zorgati ; On probabilistic constraints induced by rectangular sets on multivariate normal distributions; Mathematical Methods of Operations Research 71 (3) ; 2010 ; p 535-549 [3] W. van Ackooij, R. Henrion, A. Möller and R. Zorgati ; Joint Chance Constrained Programming for Hydro Reservoir Management; Preprint DFG Matheon \#862; http://opus4.kobv.de/opus4- matheon/frontdoor/index/index/docid/992 [4] W. van Ackooij and R. Zorgati ; Estimating the probabilistic contents of Gaussian rectangles faster in Joint Chance Constrained Programming for Hydro Reservoir management ; EngOpt 2012 3rd International Conference on Engineering optimization. Rio 2012 ; ISBN- 978-8576503439 [5] W. van Ackooij and R. Henrion and A. Möller and R. Zorgati ; On joint probabilistic constraints with Gaussian coefficient matrix ; Operations Research Letters ; Volume 39 ; p 99-102 ; 2011 [6] W. van Ackooij ; Decomposition Approaches for Block-Structured Chance-Constrained Programs with Application to Hydro-Thermal Unit-Commitment ; Submitted ; Preprint LGI Cahier de Recherche 2012-08 [7] R. Zorgati and W. van Ackooij ; Optimizing Financial and Physical Assets With Chance- Chance constrained Programming in the Electrical Industry ; Optimization and Engineering, Volume 12 Issue 1 p 237-255 ; 2011 [8] M. Minoux (2008) "Solving some Multistage Robust Decision Problems with Huge Implicitly defined Scenario Trees". Algorithmic Operations Research, Vol 4, N 1, pp. 1--18. [9] S. Ben- - Thesis [10] N. Langrene, W. van Ackooij and F. Bréant ; Dynamic Constraints for aggregated units : Formulation and Application. ; IEEE Transactions on Power Systems ; Vol 26 (3) ; p 1349-1356 ; August 2011
Mini CV Tairan WANG est né le 4 Avril 1986 à Changchun en Chine. Étudiant doctoral dans la Chair de «Systems Science and the Energetic Challenge, European Foundation for New Energy - Électricité de France, École Centrale Paris and Supélec, France». Centrale Paris. Diplôme Master en Science Diplôme bachelor en Mathématiques et Mathématiques Appliquées. Résumé (Abstract) Embracing an all-hazard view dealing with deteriorations and failures, natural disasters, accidents and malevolent intentional acts, a framework for the vulnerability analysis of safety-critical systems and infrastructures is set up. A hierarchical structure organizes the information on the hazards, which is then manipulated through a decision making process for evaluation. We present the framework and tis hierarchical model, and reform the evaluation focused on assessing the susceptibility of a safety-critical system to intentional hazards, considering criteria of diverse nature, such as: physical characteristics, social criticality characteristics, exposition to cascading failures, resilience. We use a ranking method to compare systems of different characteristics. The systematic process of analysis is presented with reference to nuclear power plants. Mots-clés All-Hazard, Vulnerability Analysis, Susceptibility, Multi-Criteria, Decision Making Tairan WANG Cadre : Laboratoire Génie Industriel, Ecole Centrale Paris Grande Voie des Vignes, 92295 Châtenay-Malabry, France. Téléphone : 06 81 06 42 80 E-mail : tairan.wang@ecp.fr Directeur de thèse Enrico ZIO Co-encadrant de thèse Vincent MOUSSEAU Début de thèse 02/2012
Contexte et Problématique The vulnerability of safety-critical systems and infrastructures is of great concern, given the multiple and diverse hazards that they are exposed to and the potential large-scale consequences. Objectif de la recherche We illustrate a decision-making framework intended to guide analysts, managers and stakeholders in the systematic identification of the sources of vulnerability and their effective management in an all-hazard perspective. Based on enough decisions made by experts, we expect that the method can then replace the experts. Méthodologie de recherche We conceptualize vulnerability as a global system property related to the system susceptibility to all hazards, intentional, random internal and natural, and to resilience. Notably, resilience should not be considered separately but for its effects on the susceptibility to three different kinds of hazards. The evaluation through the framework is shown by way of analyzing the susceptibility to intentional hazards of a safety-critical system, namely a Nuclear Power Plant (NPP), considering the vulnerability sources and the related features, the system technical and physical features, and the dependencies and interdependencies on other systems. Fuzzy TOPSIS method is used to give a primary ranking of performance for part of the NPPs. Then the ranking is integrated into a ACUTA method in using an implementation of the method available in the Open Source software Diviz of the Decision Deck Project to give a whole ranking of the considered NPPs. Avancées & perspectives A representation of the essential terms for the analysis of susceptibility to the intentional hazards for a Nuclear Power Plant (NPP) is established. Furthermore, a case study is introduced and the results simulated under software Diviz are presented. The main contribution is the establishment of a foundation for development of hierarchical NPPs by using the ACUTA method. Further work will continue to be focused on the complete of the framework, on one side to better represent the susceptibility to the intentional hazards and on the other side to merge the susceptibility to random internal failures and susceptibility to natural hazards into the framework for vulnerability management and for complex system planning and operation purposes.