ACTION ERASMUS MUNDUS

Transcription

1 EC LILLE (Anciennement IDN) Ministère de l'éducation nationale Cité scientifique (face métro 4 cantons) B.P Villeneuve d Ascq Cedex Tél. : (33) Fax : (33) ACTION ERASMUS MUNDUS PhD topic MICRO AND NANOMETRIC CONTRAST AGENTS FOR MULTIMODAL MEDICAL IMAGING AND THERAPY The proposed PhD study deals with contrast agents (CA), which consist in small particles used to enhance contrast of medical images in ultrasonic (UI) and magnetic resonance imaging (MRI). Recently, therapeutic applications of CAs, such as localized drug delivery, gene therapy and sonoporation - have been investigated. The objective of this PhD is to allow for an improved control of their therapeutic effects through a better understanding of their physics. The research work includes 3 steps: 1. Fabrication of multimodal (UI/MRI) contrast agents made of magnetic nanoparticles attached to micro-bubbles. 2. Magnetic and ultrasonic characterization of these contrast agents. 3. Modeling of their interaction with ultrasonic and magnetic fields. Supervisors Main advisor : Pr. Philippe PERNOD, Full Professor of Electrical Engineering at Ecole Centrale Lille Joint advisor : Dr. Marc GOUEYGOU, Associate Professor of Electrical Engineering at Ecole Centrale Lille Location Institut d Electronique, de Microélectronique et de Nanotechnologie IEMN UMR CNRS 8520 Avenue Poincaré - CS Villeneuve d Ascq Cedex FRANCE Research group and laboratory LIA LEMAC/LICS - Laboratoire International associé sur les phénomènes Critiques et Supercritiques en électronique fonctionnelle, acoustique et fluidique Industrial or academic partner This PhD study is part of a joint collaboration between LIA LEMACS/LICS, EC Lille and the Bioacoustics Research Laboratory (BRL) of the University of Illinois at Urbana-Champaign (UIUC) in the USA.

2 Scientific context Our laboratory LIA LEMAC/LICS is specialized in the study of coupled, multiphysical systems, with applications to functional electronics, ultrasonics and microfluidics. The multimodal contrast agents, which are at the core of this PhD, are complex objects with a strong coupling between the elastic and magnetic behavior. It is expected that this coupling can be used to develop new therapeutic applications of contrast agents. This research topic is currently supported by the French Agency for Research (ANR) through the SMART-US project. One PhD student, a postdoctoral researcher and four faculty members are involved full or part-time in this project. Profile of candidate We are looking for a PhD candidate with a background in Physics and/or Electrical Engineering and a strong interest in wave propagation problems. This candidate should be motivated to engage in experimental work and modeling. Lab contacts Pr. Philippe PERNOD philippe.pernod@iemn.univ-lille1.fr Dr. Marc GOUEYGOU marc.goueygou@ec-lille.fr Contact Erasmus Mundus à Centrale Lille Pr. Zoubeir LAFHAJ, Directeur des Relations Internationales : zoubeir.lafhaj@ec-lille.fr Mme Monique BUKOWSKI, Responsable de la Mobilité Entrante. Monique.bukowski@ec-lille.fr

3 EC LILLE (Anciennement IDN) Ministère de l'éducation nationale Cité scientifique (face métro 4 cantons) B.P Villeneuve d Ascq Cedex Tél. : (33) Fax : (33) ACTION ERASMUS MUNDUS Sujet de thèse : Study and development of the nanopowders for sustainable energy and environment. Application: Optimization of the catalytic materials for the conversion of syngas to ultraclean hydrocarbon fuels. Nanoparticles have very interesting properties like lower size, high surface area, fast dissolution, exceptional covering capacity and high activity. Because of this potential, the nanoparticles find use in variety of different areas such as electronic, magnetic, pharmaceutical, painting, cosmetic, catalytic and energy applications. This encourage increase in the production on nanopowders by 100% these last years and one speaks about a phenomenal development, passing to a market of several billion dollars by The nanoparticles mainly utilized in the sectors of catalytic chemistry and nanomaterials. These two sectors together cover almost 44% of the current market. This huge increase in manufacture and use of nanoparticles makes it likely increasing human and environment exposure to nanoparticles. However, the system of the nanopowders is complex, distinctly different from its bulk counterpart and needs most powerful analytical techniques to study its properties. Despite of this nanoparticles recently form the basis for any catalysts and electrocatalysts of great importance to future energy and fuel technologies. This thesis is related to the study of nanomaterials intended for the heterogeneous catalysis for the production of the ultraclean hydrocarbon fuels. In this work the nanometric powders will be developed for the use of the industrial products and insisting on the approach of safety and environment (toxicology and epidemiology). The program of this thesis is structured around the following objectives: Improvement of the level of knowledge of the nanoparticules /contaminations Influence of the factors: hydrodynamics,temperature,pressure on the structure of powders Study of nanometric powder behaviour : flowability, physical, structral and textural properties, Description and calculatation of interparticle forces Numerical Modeling of the nanopowder behavior Application: testing the nanopowder catalysts for its performance in conversion of syngas to ultraclean hydrocarbon fuels Encadrements : Professeur Nouria Fatah Lieu de la Thèse :Ecole Centrale de Lille

4 Equipe de Recherche du laboratoire de recherche : UCCS (Unité de Catalyse et de Chimie de solide) Equipe ENERGIE, Contexte Scientifique : study of nanomaterials intended for the heterogeneous catalysis for the production of the ultraclean hydrocarbon fuels. Profil du candidat : Chemical engineering Science Contacts recherche Nouria Fatah : Nouria.fatah@ec-lille.fr Tel Contact Erasmus Mundus à Centrale Lille Pr. Zoubeir LAFHAJ, Directeur des Relations Internationales : zoubeir.lafhaj@ec-lille.fr Mme Monique BUKOWSKI, Responsable de la Mobilité Entrante. Monique.bukowski@ec-lille.fr

5 EC LILLE (Anciennement IDN) Ministère de l'éducation nationale Cité scientifique (face métro 4 cantons) B.P Villeneuve d Ascq Cedex Tél. : (33) Fax : (33) ACTION ERASMUS MUNDUS Sujet de thèse : Hydrogen production from biomass Encadrements : Pr. Sébastien Paul (sebastien.paul@ec-lille.fr) Dr. Louise Duhamel (louise.duhamel@univ-lille1.fr) Lieu de la Thèse : UCCS Unité de Catalyse et de Chimie du Solide UMR CNRS 8181, Ecole Centrale de Lille et Université de Lille 1, Villeneuve d Ascq, France Equipe de Recherche du laboratoire de recherche Equipe Valbio de l UCCS Partenaire industriel ou institutionnel : aucun Contexte Scientifique Hydrogen is widely regarded as a promising future energy source to address a series of crisis of the oil shortage, climate change and environmental pollution, which derive from the exploitation and utilization of fossil fuels. 1, 2 Hydrogen energy is crucial to any clean energy policy based on its high-energy capacity and environmentally friendliness. Moreover, the widespread application of fuel cells becomes closer to reality so increased attention is focused on hydrogen production technologies. As a matter of fact, there has arisen a strong interest in using H 2 -based fuel cells as future source of energy due to the high conversion efficiency of hydrogen energy to electricity as well as the absence of pollutant gases emission. Globally, the Steam Reforming (SR) of natural gas, especially methane, is still the most commonly used and the most economically competitive method for H 2 production. In order to support clean and sustainable hydrogen economy, it is urgently desirable to produce hydrogen from renewable energy sources, such as biomass or biomass-derived materials. 3 The current mature biomass-fermentation technology makes bio-ethanol a highly available and low-cost feedstock for H 2 production. 4 Ethanol is easily transportable, safe to handle and store, nontoxic liquid fuel that can be used everywhere since mishaps do not lead to significant [ 1 ] G. A. Deluga, J. R. Salge, L. D. Schmidt, X. E. Verykios, Science 2004, 303, 993. [ 2 ] A. Midilli, M. Ay, I. Dincer, M. A. Rosen, Renewable and Sustainable Energy Rev. 2005, 9, 273. [ 3 ] M. Ni, D. Y. C. Leung, M. K. H. Leung, Int. J. Hydrogen Energy 2007, 32, [ 4 ] L. V. Mattos, G. Jacobs, B. H. Davis, F. B. Noronha, Chem. Rev. 2012, 112, 4094.

6 environmental damage, as is the case with oil. Ethanol is already a major fuel in Brazil and in USA and is making its way to Europe. The Steam Reforming of Ethanol (SRE) reaction is not thermodynamically favorable at low temperatures, and essentially requires an extra energy input. Such high temperature operations ( 650 C) not only consume plenty of energy, but also bring inconvenience to the application of hydrogen to fuel cells. On the other hand, the energy needed can be supplied by adding some O 2 or air into the feed. This idea enables the exothermic Partial Oxidation of Ethanol (POE) to thermodynamically take place at low temperatures, during which a portion of ethanol is burned to offer the required energy so as to simultaneously achieve the SRE reaction. In such a context, a technology combined with the SRE and POE processes, generally called the Autothermal Reforming of Ethanol (ATRE), would be promising for the on board H 2 production, that is, for the mobile applications that call for high hydrogen selectivity and rapid response. The autothermal reformer must be adiabatic, which is important for the control of energy. The catalytic transformation of different alcohols has already been studied in our laboratory (Unité de Catalyse et de Chimie du Solide UMR CNRS 8181). As hydrogen production from renewable sources such as biomass is gaining attention at the international level, and taking into account the already very good results obtained in the laboratory, 5,6 especially at low temperature, we wish to pursue the studies on hydrogen production by transformation of ethanol. This work requires to prepare catalysts and to analyze their catalytic performance in transformation of ethanol in a fixed-bed reactor. Besides, physico-chemical characterizations will be necessary for understanding the different phenomena involved in order to be able to optimize the catalytic formulation (X-Ray Diffraction, XPS, Raman, IR, UV, TPR, Microscopy ). Moreover, an autothermal reactor will be also developed in order to optimize the management of the energy. Profil du candidat Master in Chemistry or in Chemical Engineering with some knowledge in Heterogeneous Catalysis. Contacts recherche Dr. Louise DUHAMEL, Chercheur CNRS à l UCCS (louise.duhamel@univ-lille1.fr) Pr. Sébastien PAUL, Professeur à l Ecole Centrale de Lille (sebastien.paul@ec-lille.fr) Contact Erasmus Mundus à Centrale Lille Pr. Zoubeir LAFHAJ, Directeur des Relations Internationales : zoubeir.lafhaj@ec-lille.fr Mme Monique BUKOWSKI, Responsable de la Mobilité Entrante. Monique.bukowski@ec-lille.fr [ 5 ] C. Pirez, M. Capron, H. Jobic, F. Dumeignil, L. Jalowiecki-Duhamel, Angew. Chem. Int. Ed 2011, 50, [ 6 ] W. Fang, C. Pirez, S. Paul, M. Capron, H. Jobic, F. Dumeignil, L. Jalowiecki-Duhamel. ChemCatChem. 2013, 3, 2207.

7 EC LILLE (Anciennement IDN) Ministère de l'éducation nationale Cité scientifique (face métro 4 cantons) B.P Villeneuve d Ascq Cedex Tél. : (33) Fax : (33) ACTION ERASMUS MUNDUS 1 Sujet de thèse : Flexible active materials for flexible electonics. Encadrements : Pr. Philippe PERNOD (EC-Lille/IEMN) Dr. Abdelkrim TALBI (EC-Lille/IEMN) Dr. Nicolas TIERCELIN (CNRS CR1 EC-Lille/IEMN) Lieu de la Thèse : Institute of Electronics, Microelectronics and Nanotechnology (IEMN-CNRS UMR 8520) Website : Equipe de Recherche du laboratoire de recherche International Associated Laboratory LICS/LEMAC : International associated Laboratory on the studies of Critical and Supercritical phenomena. Background, Context: Smart materials consisting of elastomer composite are opening up a realm of opportunities for the development of portable and flexible devices, in particular, materials whose mechanical properties are coupled to external stimuli such as temperature (shape memory elastomer or polymer), electric field (piezoelectric materials) and magnetic field (elastomer composite based on nano-particles). These flexible materials have attracted a great deal of interest in various applications ranging from medical (artificial muscles, surgical tools, sensors networks,...), biomimetic robots, autofocus lens positioning, tactile displays and sensors, reconfigurable RF- MEMS, and active fluid pumps. Flexible, high performance at low driving power, easily processed, robustness and lightweight construction are key requirements, for both applications. To meet these needs, various solutions of smart polymeric materials, such as dielectric, ionic, piezoelectric, and magnetic polymers are currently under investigation (1, 2). From a technological point of view, these materials are of interest for many uses, but they suffer from a lack of performances: for example high driving voltage for dielectric polymers, low switching time for ionic polymers, low force for piezoelectric polymers, and hard integration for driving elements in the case of magnetic polymers. Therefore, the development of advanced materials which present an exalted response when they are submitted to external stimuli will be critical to progress in this areas. The recent advances in synthesis and assembling of nano-materials (graphene, carbon nanotubes CNT, carbon nano-fiber CNF, colloidal magnetic nano-particles, piezoelectric nano-crystals...) with exalted mechanical, electro-chemical, piezo-resistive,

8 piezoelectric, magnetic and other physical properties has opened the possibility for the development of a new class of smart nano-materials. The addition of these nano-materials within flexible elastomers enables new means to elaborate elastomer composites with exalted response to an external stimuli. Additionally, the emerging techniques in nano-fabrication have the potential to optimize these elastomer composites responses, expand the range of device structures that can be considered and simplify processing. The proposed thesis deals with the development of new smart elastomer composites (including magnetic, piezoelectric and ionic elastomers) based on active nano-materials such as magnetic nano-particles (Fe, Fe3O4), piezoelectric nano-crystals (LiNBO3, KNBO3,PVDF), or graphene, CNT, CNF. The related structural, physical properties, and the interfacial interactions of elastomers chains with the surfaces of dispersed nano-materials will be investigated. These are critical for understanding and improving the electro-mechanical coupling of these elastomer nano-composites. The main aim of this thesis is to propose new smart elastomer materials to advance the performance of existing solutions by thoroughly understanding the role of smart nano-materials in the composite. In terms of functional flexible devices, we focus especially on the development of low-power, fast time response, high sensitive transduction mechanism capable of sub/millimeter scale displacement depending on the targeted application. In our case, examples of targeted applications are elaboration of compact and portable flexible tactile display surface for augmented reality (3), or artificial skins that mimic the characteristics of natural dermal tissues for potential use in robotics, or for RF reconfigurable antenna with operation frequency around of 60GHz (4). Laboratory: IEMN (Institut d Electronique, de Microélectronique et de Nanotechnologie) is a research institute created by the National Centre for Scientific Research (CNRS), two universities and an Engineer school of France northern region. IEMN equipment for design, fabrication and characterization of devices are at the best European level. The IEMN scientific activity covers a large domain going from the physics of materials and nanostructures to optoelectronic devices, biosensors, microwaves, telecommunication and acoustics instrumentation. Researchers who are taking part of the PhD supervision are from LICS/LEMAC laboratory in the IEMN institute, and their research works concern principally physical properties (magnetic, piezoelectric,...) of condensed matter and related devices for the applications in flexible electronic devices (active and passive), tactile display, aerodynamic flow control, reconfigurable MEMS. Candidate: The successful candidate will start a PhD on: Elaboration of smart elastomer composites and study of their physicals properties for applications in Micro/Nano- Electro-Mechanical systems (MEMS/NEMS). The work will cover the fabrication, structure and property characterizations of the elastomer nanocomposites, the design and fabrication of a demonstrators, and the characterizations of the final devices. The PhD will last 3 years and will be carried out at the Institut d'electronique de Microélectronique et de Nanotechnologie (IEMN) located on the campus of university of Lille 1 & EC Lille (France). 1) L. Persano et al., High performance piezoelectric devices based on aligned arrays of nanofibers of poly(vinylidenefluoride-co-trifluoroethylene), nature communications 2639, 2013.

9 2) O. Kim et al. Fast low-voltage electroactive actuators using nanostructured polymer electrolytes, nature communications 3208, ) J. Streque, A. Talbi, P. Pernod, V. Preobrazhensky, Pulse-driven magnetostatic micro-actuator array based on ultrasoft elastomeric membranes for active surface applications, J. Micromech.Microeng.,22,9(2012) ) H. Sami Hage-Ali, Nicolas Tiercelin, Philippe Coquet, Ronan Sauleau, Vladimir Preobrazhensky, and Philippe Pernod, A Millimeter-Wave Inflatable Frequency Agile Elastomeric Antenna, Antennas and Wireless Propagation Letters, IEEE, VOL. 9, 2010, pp Contacts : Pr Philippe PERNOD, Ecole Centrale de Lille, Directeur du LICS. Philippe.pernod@iemn.univ-lille1.fr Dr Abdelkrim TALBI, Ecole Centrale de Lille, Maître de conférences Abdelkrim.talbi@ec-lille.fr Dr Nicolas TIERCELIN, Chargé de Recherche CNRS Nicolas.tiercelin@iemn.univ-lille1.fr Contact Erasmus Mundus à Centrale Lille Pr. Zoubeir LAFHAJ, Directeur des Relations Internationales : zoubeir.lafhaj@ec-lille.fr Mme Monique BUKOWSKI, Responsable de la Mobilité Entrante. Monique.bukowski@ec-lille.fr

10 EC LILLE (Anciennement IDN) Ministère de l'éducation nationale Cité scientifique (face métro 4 cantons) B.P Villeneuve d Ascq Cedex Tél. : (33) Fax : (33) ACTION ERASMUS MUNDUS 1 Sujet de thèse : Artificial synapses for bio-inspired/neuromorphic architectures. Encadrements : Pr. Philippe PERNOD (EC-Lille/IEMN) Dr. Nicolas TIERCELIN (CNRS CR1 EC-Lille/IEMN) Lieu de la Thèse : Institute of Electronics, Microelectronics and Nanotechnology (IEMN-CNRS UMR 8520) Website : Equipe de Recherche du laboratoire de recherche International Associated Laboratory LICS/LEMAC : International associated Laboratory on the studies of Critical and Supercritical phenomena. Partenaire industriel ou institutionnel Contexte Scientifique The limits of CMOS technologies will soon be reached and the tremendous energy dissipation of the current concepts hinders the continuous performance increase of our information processing systems. In the same time, the energetic footprint on the environment becomes significant. It is thus compulsory to find new paradigms for the processing and storage of information to meet our ever-growing needs and reduce the impact on the environment. Brain inspired neuro-morphic architectures are a promising lead for a large processing capability with a high efficiency. The two laboratories IEMN (hardware side) and LIFL (software side) recently started to collaborate to explore these bio-inspired architectures and develop the required components for their implementation. Current models and simulations involve artificial neuron networks that are interconnected with synapses that exhibit plasticity and thus present learning capabilities. Such a network requires an artificial synapse that is not readily available so far. To implement such a synapse, our proposal is to develop a memristor component based on artificial multiferroic nanostructures, which are a specialty of our International Associated laboratory LIA LICS/LEMAC at IEMN. In order to induce the memory/plasticity, hysteretic phenomena of the magnetic and/or electric systems will be taken advantage of. The devices will first be explored using the available theoretical and numerical means at IEMN. A model that can be integrated in neural networks simulation tools of LIFL will be proposed so as to test

11 the expected performances and perform a feedback on the device conception. The objective of the doctoral work is the realization of a crossbar prototype with 256x256 connections showing effective learning capabilities with a possible applications to image processing or artificial vision. Profil du candidat This doctoral work involves both theoretical and prototype fabrication in the clean room facilities of IEMN. Preferably, the candidate will have a Master s degree with a physics, electronics or micro/nano systems major. Interest for magnetic and ferroelectric thin films is a plus as well as knowledge in clean room environment and spintronics. The candidate will have to be fairly autonomous. The research field being relatively recent and hot, the doctoral candidate will be free to express his (her) creativity. Contacts recherche Dr Nicolas TIERCELIN, Chargé de Recherche CNRS Nicolas.tiercelin@iemn.univ-lille1.fr Pr Philippe PERNOD, Ecole Centrale de Lille, Directeur du LICS. Philippe.pernod@iemn.univ-lille1.fr Contact Erasmus Mundus à Centrale Lille Pr. Zoubeir LAFHAJ, Directeur des Relations Internationales : zoubeir.lafhaj@ec-lille.fr Mme Monique BUKOWSKI, Responsable de la Mobilité Entrante. Monique.bukowski@ec-lille.fr

12 EC LILLE (Anciennement IDN) Ministère de l'éducation nationale Cité scientifique (face métro 4 cantons) B.P Villeneuve d Ascq Cedex Tél. : (33) Fax : (33) ACTION ERASMUS MUNDUS 1 Sujet de thèse : This work is a continuation of the work done by a previous PhD, on offshore wind farms [1-5]. The context is the integration of renewable energy in offshore DC grids. It consists in studying a particular structure [6], where clusters of wind turbines are made by the series of several wind turbines, where the wind farm is achieved by paralleling several clusters, as shown in Figure 1. Throughout the thesis, a comparison with the solution shown in Figure 2 will be systematically performed. Figure 1 Figure 2 Here are some steps of the study: A. Literature review. B. Study of the architecture in Figure 1: a. Choice of different voltage at the various network levels, b. Characterization of required power electronic converters inside the architecture c. Issues of electrical isolation at the various network levels,... C. Control of the wind farm, according to various configurations of wind speed strength (weak to strong). a. Power interaction with the AC grid, b. Steady state and transient studies in case of weak or strong winds. D. Use of storage devices in the architecture of Fig. 1, in order to facilitate various energy management functions (smoothing of the power supplied to the grid, stable DC voltage bus, continued operation in spite of the conditions of wind extreme wind, energy storage, etc....). Study the best location of the storage devices within the architecture, according to the objectives. E. Development of a strategy for managing the power flows within the farm, by using the methodology developed in our research team RESEAUX. F. Validation through simulations in the MATLAB / SIMULINK, and applications on our experimental test bench. G. Writing the PhD thesis, articles for international journals and conferences. Bibliography: [1] "Innovative DC connections for offshore wind and tidal current farms". Third EPE-Wind Energy Chapter, Staffordshire, avril 2010, Pascal MONJEAN, Christophe SAUDEMONT, Jonathan SPROOTEN, Benoît ROBYNS, Loic LECLERE, Abdollah MIRZAIAN. [2] "Topologies Comparison of Multi-cell Medium Frequency Transformer for Offshore Farms", ACDC 2010, The 9th International Conference on AC and DC Power Transmission, October 2010, IET: London, UK, Pascal MONJEAN, Jérôme DELANOE, Jérôme AUGUSTE, Christophe SAUDEMONT, Jonathan SPROOTEN, Abdollah MIRZAIAN, Benoît ROBYNS.

13 [3] "Comparison methodology of offshore wind farm architectures", Electrimacs 2011, Cergy-Pontoise, France, Pascal MONJEAN, Jérôme DELANOE, Jonathan Sprooten, Christophe SAUDEMONT, Benoît ROBYNS. [4] "Control strategies of DC-based offshore wind farm", EPE 2011, Birmingham, UK, Pascal MONJEAN, Jérôme DELANOE, Jérôme AUGUSTE, Daniel MARIN, Christophe SAUDEMONT, Benoît ROBYNS. [5] Optimisation de l architecture et des flux énergétiques de centrales à Energies Renouvelables offshore et onshore équipées de liaisons en continu», Thèse de Doctorat, soutenue le 26/09/2012 à Lille. [6] Stefan LUNDBERG. Wind Farm Configuration and Energy Efficiency Studies Series DC versus AC Layouts, Thesis, Chalmers University of Technology, Sweden, Encadrements : Bruno FRANCOIS, professeur L2EP Equipe RESEAUX, Ecole Centrale de Lille Cité scientifique, CS 20048,, Villeneuve d'ascq Cedex,, France tel : bruno.francois@ec-lille.fr Christophe SAUDEMONT, Enseignant-Chercheur HDR L2EP Equipe RESEAUX, Ecole des Hautes Etudes d Ingénieur 13, rue de Toul, Lille Cedex Equipe de Recherche du laboratoire de recherche L2EP Equipe RESEAUX Partenaire industriel ou institutionnel Hautes Etudes d Ingénieur: HEI Contexte Scientifique L intégration de la production d énergie décentralisée, de type renouvelable, est au cœur de ce sujet, qui porte sur le développement de fermes éoliennes offshore, construites sur la base de réseaux continus. L équipe RESEAUX du L2EP est impliquée dans le développement de structures de réseaux continus moyenne et haute tension, par le biais de ses travaux. Elle travaille également au développement de stratégies de supervision de l énergie dans ces mêmes architectures de puissance. Profil du candidat Le candidat devra avoir des compétences en électrotechnique et en électronique de puissance. Il sera intéressé par le travail en équipe, et aura le souci de communiquer sur ses activités de recherche. Une connaissance du français (orale et écrite) sera appréciée. Contacts recherche Bruno FRANCOIS, professeur, bruno.francois@ec-lille.fr Christophe SAUDEMONT, Enseignant-Chercheur HDR Contact Erasmus Mundus à Centrale Lille Pr. Zoubeir LAFHAJ, Directeur des Relations Internationales : zoubeir.lafhaj@ec-lille.fr Mme Monique BUKOWSKI, Responsable de la Mobilité Entrante. Monique.bukowski@ec-lille.fr

14 EC LILLE (Anciennement IDN) Ministère de l'éducation nationale Cité scientifique (face métro 4 cantons) B.P Villeneuve d Ascq Cedex Tél. : (33) Fax : (33) ACTION ERASMUS MUNDUS 1 Sujet de thèse : Coordination du réglage primaire de fréquence de générateurs dispersés à base d énergie renouvelable Encadrements : Bruno FRANCOIS Lieu de la Thèse : Ecole Centrale de Lille Equipe de Recherche du laboratoire de recherche : Ecole Centrale de lille Partenaire industriel ou institutionnel Contexte Scientifique Les générateurs à base d énergie renouvelable sont raccordés au réseau électrique par des convertisseurs électroniques de puissance. Pour permettre le développement massif de ce type de production, ces convertisseurs vont devoir participer à la gestion du réseau électrique comme les moyens classiques de production d électricité (alternateurs). Pour faire cela, la fonction réglage primaire de fréquence est synthétisée sous forme d algorithme de commande et implanté dans le système de contrôle de l onduleur. De par leur faible puissance, ces générateurs sont raccordés sur le réseau de distribution électrique ce qui conduit à constituer localement de la réserve de puissance. Cependant, la multiplicité de ce type de générateurs participant au réglage de fréquence avec des paramètres de réglage différents et aussi des puissances générées variables peut conduire à une dégradation de la disponibilité de la réserve primaire de puissance et à une instabilité du réseau électrique. De plus, certains générateurs peuvent être beaucoup plus sollicités pour réaliser ce réglage de fréquence que d autres, ce qui va à l encontre de l équité des acteurs du système électrique dans un marché libéralisé de l électricité.

15 Le sujet de cette thèse aura pour but d étudier l effet des paramètres de réglage de contrôleur primaire de fréquence sur la stabilité d un réseau électrique de distribution par une étude théorique. La disponibilité de la réserve primaire selon qu elle soit issue de l énergie renouvelable variable pour les générateurs ou issue d énergie stockée (stockage distribué sous forme de batteries) sera évaluée. En effet, la variabilité de la production rend plus difficile la caractérisation de la contribution des fermes éoliennes. Avant d exiger leur participation, il convient donc de réfléchir aux solutions techniques permettant de gérer cette intermittence. Ensuite, les technologies des réseaux électriques intelligents et notamment les réseaux de communications seront exploités afin de déployer une stratégie de coordination de ces générateur au réglage de fréquence en mettant en œuvre une technique permettant l adaptation à distance des paramètres de réglage des correcteurs. Profil du candidat Connaissances en réseaux électriques, technologies de générateurs à base d énergie renouvelable, automatique continue Bonne maitrise de l anglaise Maitrise du logiciel MATLAB-SIMULINK Contacts recherche Bruno FRANCOIS Ecole Centrale de Lille, L2EP Cité scientifique, CS 20048, Villeneuve d'ascq Cedex, France tel : , fax : bruno.francois@ec-lille.fr Contact Erasmus Mundus à Centrale Lille Pour Zoubeir LAFHAJ, Directeur des Relations Internationales : zoubeir.lafhaj@ec-lille.fr Mme Monique BUKOWSKI, Responsable de la Mobilité Entrante. Monique.bukowski@ec-lille.fr

16 EC LILLE (Anciennement IDN) Ministère de l'éducation nationale Cité scientifique (face métro 4 cantons) B.P Villeneuve d Ascq Cedex Tél. : (33) Fax : (33) ACTION ERASMUS MUNDUS PhD Title: Dynamic itinerary optimization inside hypermarkets Supervisor: Prof. Abdelkader EL KAMEL Location : Ecole Centrale de Lille Research Team & Lab: COSy "Control and Optimization of complex Systems" du LAGIS Institution or Industrial Partner: First part of this work was carried out in cooperation between industrial partner LEROY MERLIN and the Region Nord in the frame of Mrs. HADJ KHALIFA PhD Thesis defended on June, A possible pursuing partnership is considered and under investigation. Scientific Context: Shopping in supermarkets is a burden for some people since spending hours looking for items seems to be tiring and boring especially if it is the first visit. After the electronic commerce (e-commerce), the mobile commerce (m-commerce) represents, nowadays, a new channel in distribution. Indeed, mobile applications give to the companies the possibility to be present on the customer s everyday life. Thanks to the new technologies such as Bluetooth, the Wi-Fi, the NFC (Near Field Communication), and the QR Code (Quick Response Code), we find the ubiquitous commerce (u-commerce). This research is a part of a project which aims to design an intelligent indoor navigation system dedicated to guide customers during their shopping inside hypermarkets to show them, in real time, the route to pick up their items. In previous work (Hadj Khalifa, 2010a), we presented the architecture of i-guide system. We chose the RFID technology (Radio Frequency IDentification) coupled with the Wi-Fi installed in the hypermarket to locate the customer in the hypermarket. Furthermore, we need an optimization algorithm to compute the shortest path visiting all items once. In (Hadj Khalifa, 2010b), we proposed a methodology to determinate distances between each two items in the hypermarket. Thus, when the user enters his shopping list, the system determines his position, thanks to RFID tags, and locates the items from the database and then the shortest path is computed. After that, the application guides him along the way by giving him directions. When the RFID tags indicates that the user takes a different direction, the system prompts the user to add the desired item and the corresponding shortest path is dynamically recomputed (Hadj Khalifa 2010a). Furthermore, we proposed an Android mobile application to facilitate the use of the system (Hadj Khalifa 2011). We chose the Android operating system because it is an open source and it becomes the leader of the worldwide Smartphone market. The Android application needs a calculator to compute the shortest itinerary in a reasonable computing time. Candidate profile: Good level, dynamic & motivated candidates with strong background on Optimization Techniques, Logistics/OR, Programming & Simulation. Particular skills on Modeling (UML, BPMN ) and Technological/Eng. Implementation are appreciated. Research Contact: Prof. Abdelkader EL KAMEL abdelkader.elkamel@ec-lille.fr Erasmus Mundus Contact at Centrale Lille: Pr Zoubeir LAFHAJ, Directeur des Relations Internationales : zoubeir.lafhaj@ec-lille.fr Mme Monique BUKOWSKI, Responsable de la Mobilité Entrante. Monique.bukowski@ec-lille.fr